OmniBlend I User manual

1
OWNER’S MANUAL
OmniBlend I
OmniBlend (Pty) Ltd
SOUTH AFRICA
www.omniblend.co.za
Read and save these instructions

2
Table of Contents
LET’S GET STARTED 3
SERVICE & REGISTRATION 4
IMPORTANT SAFEGUARDS 5
PARTS & FEATURES 9
ABOUT THE BLADES 12
HOW TO USE THE TAMPER? 13
CONTROL PANEL 15
HINTS FOR SETTING SPEEDS 15
CARE AND CLEANING 17
SPECIFICATIONS 19

3
LET’S GET STARTED
CONGRATULATIONS!
You are about to see how quick, easy, and delicious healthy eating can be! We hope that you’ll find the information in
this step-by-step guide to be useful and beneficial. The possibilities are endless, and we know you will enjoy your new
OmniBlend lifestyle!
Please read all the safety information, warnings, and instructional material found in this booklet before getting started. Set
your OmniBlend machine on a dry, level surface. Make sure that the power switch is set to Off, and that the machine is
plugged into a grounded electrical outlet. Then, follow the cleaning instructions on page 17 to prepare your machine for
use. Always clean your machine before the first use.

4
SERVICE & REGISTRATION
OMNIBLEND SERVICE
Record the serial number of your OmniBlend on the warranty form provided with the machine for future reference. These
numbers can be found on the back of the motor base.
Before returning this product for any reason, including repair, first contact OmniBlend Customer Service at
021 012 5999, email [e-mail], or contact your local dealer.
PRODUCT REGISTRATION
Enjoy faster and easier service in the future by taking a few minutes to register your OmniBlend machine today.
Choose one of these 2 easy ways to register your machine:
1. Online at www.omniblend.co.za/pages/product-registration-form
2. Email [e-mail]
Failure to register your machine will not diminish your warranty rights.

5
IMPORTANT SAFEGUARDS
To avoid the risk of serious injury when using your OmniBlend blender, basic safety precautions should be followed,
including the following.
IMPORTANT INSTRUCTIONS FOR SAFE USE
Do not leave your OmniBlend blender unattended when operating. In case of a technical failure, contact OmniBlend for
any repairs or servicing requirements.
WARNING
Electrical Shock Hazard.
Use grounded outlet only.
DO NOT remove ground.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to follow instructions can cause death or electrical shock.
AUTOMATIC OVERLOAD PROTECTION
Your OmniBlend machine is equipped with a special feature: Automatic Overload Protection. This built-in feature is
designed to protect the motor and prevent your machine from overheating. That means peace of mind for you as an

6
OmniBlend owner. If the Overload Protection kicks in, the machine will stop operating suddenly. Leave the machine to
cool down for 5 to 10 minutes, and then (while the machine is still connected to power), press the Overload Button on the
bottom of the machine. The machine will now work as normal again.
WARNING
To Avoid Injury.
Read and understand instruction manual before using this machine.
READ ALL INSTRUCTIONS AND SAFEGUARDS BEFORE OPERATING BLENDER.
1. Not intended for use by or near children or persons with reduced physical, sensory, or mental capabilities or lack
of experience and knowledge. Close supervision is necessary when any appliance is used by or near children or
incapacitated persons.
2. To protect against the risk of electrical shock, do not put the blender base in water or other liquid.
3. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
4. Avoid contacting moving parts.

7
5. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or
damaged in any manner. Call OmniBlend Customer Service at 021 012 5999 or email
[e-mail] for examination, repair or replacement.
6. The use of attachments not expressly authorized or sold by OmniBlend for use with this blender, including canning
jars, may cause fire, electric shock, or injury.
7. Do not let cord hang over edge of table or counter. Do not let cord contact hot surface, including the stove.
8. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage
to the blender. A silicon scraper or spatula may be used, but only when the OmniBlend blender is not running.
9. The tamper provided must be used only when the main part of the lid is in place.
10. Blades are sharp. Handle or remove blade and blade assembly from the container with extreme care to avoid
injury. To reduce the risk of injury, never place a blade assembly on the motor base unless assembled to the
OmniBlend container.
11. Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in the container as this will damage
the blades and other components when starting the machine and may cause injury.
12. Never attempt to operate with damaged blades.

8
13. Always operate blender with lid and lid plug firmly in place. The lid plug should be removed only when adding
ingredients and when using the tamper.

14. When blending hot liquids or ingredients, use caution; spray or escaping steam may cause scalding and burns.
Fill the jug 1/3 or max ½full. Filling the jug more than halfway can cause too much steam to build up and can
blow the lid off the blender. Remove the lid-plug, and place lid (without the cap) securely on the jug. Cover the
blender lid with a clean kitchen towel, and allow for an easy escape route for the hot steam. Hold the lid
securely, and start blending on lowest speed. Gradually increase speed if needed.
15. When making nut butters or oil-based foods, be cautious of heat. The jug will heat up quicker than with using
liquids. Processing for longer periods can cause dangerous overheating. And can cause damage to the jug.
Leave the jug to cool for 10-15 min, and then continue processing. 

9
PARTS & FEATURES
2-Part Lid: your new machine has our latest lid design. It is easy to put on
and take off, and easy to clean. Always use the lid and the lid insert when
the machine is in operation. The 1.5ltr jug has a square lid, the 2ltr jug
has a round lid. Both have lid inserts.
CAUTION: Lids are not interchangeable between different container sizes.
Snap the lid onto the container and leave in place for a few minutes.
Once the lid has been left on the container, it will be much easier to lock
or remove.
Lid Insert: press into the lid. For the 2ltr jug, make sure it is fitted within the
2 little knobs, to avoid it to rotate during blending. Remove the lid insert to
use the tamper or add ingredients.
To lock the lid in place:
1. Position lid on container with sides of the lid between the
container’s inner edges. 
2. Push the lid the container’s edges until it locks in place. 
The lid must always be secured when processing, especially hot liquids
that may scald. 

10
WARNING
Rotating Blades can cause severe injury.
DO NOT reach into container while machine is running.

To Remove the Lid: Press the lid the center, to while holding the container securely.
To Remove the Lid Plug: Rotate the lid plug counterclockwise from the “locked” to “unlocked” position and lift out.
Container: Ounces, cups, and milliliters are clearly marked.
Power Cord: Your machine is equipped with a long power cord. Store the unused portion neatly underneath.
Bottom View / Cord Wrap: Plastic cord retainers hold the cord securely. There is no need to unscrew the cord retainers
to let out more cord.
They are flexible, and return to position after the cord is lifted out.
Automatic Overload Protection: Your OmniBlend motor is designed to protect itself from overheating. If the motor shuts off,
follow these instructions:
For your safety the OmniBlend blenders are equipped with Overload Protection. If the motor shuts off suddenly, leave the
machine to cool down for 5-10 minutes, and then press the black Overload Button on the bottom of the machine.

11
Overload Button

12
ABOUT THE BLADES
The OmniBlend machine comes standard with the multi-purpose blade. The blade assembly has stainless steel ball
bearing. This blade fits both the 1.5 Ltr and 2 Ltr container. Additional containers with blades may be purchased
separately. Blade assemblies can also be purchased separately. The blade assembly comes with a 1 year warranty.
WARNING
Blade Assembly can damage drive socket.DO NOT remove the container
while the blades are still spinning.
Removing the container prior to blades stopping: Your blade assembly will wear out the teeth of the drive socket
when the container is removed from the blender while it’s still in operation. The Drive Socket is guaranteed for 3 years
against stripping, misalignment or breaking. The Drive Socket is not replaced under warranty when it shows signs of
misuse described above.
WARNING
Moving parts may become hot after extended use. DO NOT touch.

13
HOW TO USE THE TAMPER?
The tamper allows you to accelerate the process of very thick and/or frozen mixtures that cannot be processed in a
regular blender. Using the tamper maintains circulation by preventing air pockets from forming. While the machine is
running, and only through the lid plug opening, use the tamper to press ingredients into the blades as you make frozen
ice creams and nut butters, or purée fruits and vegetables.
WARNING
Rotating Blades can cause severe injury.
DO NOT put hands, spatulas, etc. in the
container while the machine is running or while the container is still on the base,
only use the tamper through the lid.


14
1. The splash disk (near the top of the tamper) and lid prevent the tamper from
touching the blades when the lid is secured properly in the locked position. 
2. The container should not be more than two-thirds full when the tamper is used
during blending. 
3. Do not use the tamper for more than 30 consecutive seconds (to avoid
overheating). 
4. If the food does not circulate, the machine may have trapped an air bubble.
Carefully remove the lid plug while making sure the lid stays firmly in place.
Release the air bubble by inserting the tamper through the lid plug opening.
5. Holding the tamper straight down may not always help the ingredients
circulate. If need be, point the tamper toward the side or corner of the
container.

WARNING
When using the tamper, hold the jug firm on the base with the other hand,
and avoid excessive wiggling of the jug on the base. If the jug is wiggling on
the base it starts wearing the drive socket.

15
CONTROL PANEL
1. On/Off Switch: Push up to turn On (|). Push down to turn Off (O). 
2. Speed Dial: MIN indicates the lowest speed available. Turn to MAX to increase the speed. Always make sure
that the MAX/MIN Turn Dial is set to MIN before pushing the On/Off Switch to the On position. Do not start
your machine on MAX speed. 
3. Pulse Switch: Select the MAX speed instantly. It is inactive by default, and can be activated when pressing down
the switch. 

HINTS FOR SETTING SPEEDS
Always start the machine with the Variable Speed dial down to the MIN position. Slowly turn the Variable Speed Dial to
the desired speed depending on the recipe used. If a recipe calls for processing on MAX, slowly rotate the Variable
Speed Dial clockwise. Do not begin processing on MAX, always start with the Variable Speed Dial at MIN.
Process on the MAX setting for as much of the processing time as possible to make whole food juices, soups, shakes,
frozen mixtures, purées, nut butters and for grinding grains. Processing times will generally be less than one minute (most
take less than 30 seconds). MAX speed provides the best quality of refinement, breaking down ice, frozen fruit, whole
fruits or vegetables, and grains to a smooth lump-free consistency.
TIP: Blending too long at too low a speed setting will overheat the machine and cause the Automatic Overload Protection
to turn the machine off. Use the MAX speed as often as possible to achieve the most uniform consistency. Blending on
MAX speed also maximizes the motor’s cooling fan to avoid overheating.

16
When on the MAX, if the food does not circulate, the machine may be overloaded or may have trapped an air bubble.
Carefully remove the lid plug while making sure the lid stays firmly in place. Release the air bubble by inserting the tamper
through the lid plug opening. If circulation problems continue, reduce the machine speed. A lower speed may allow food
to circulate when a higher speed does not. Once the food is circulating freely, increase the speed back to MAX and
continue processing.
WARNING
Never Start on Speeds Above 1 with Hot Liquids to Avoid Possible Burns.
Use Caution; escaping steam or splashes may scald.Lock the lid. This will
prevent expansion from affecting the position of the lid when the machine is
turned on.
Start on MIN, slowly increase to MAX.

17
CARE AND CLEANING
Container:
Rinse the jug after each use with warm water. To prepare your new machine for initial use, follow the steps under Normal
Cleaning. This will clean the unit, and break-in the motor.
Normal Cleaning:
1. Fill one third of the container with warm water and add a couple drops of dish wash liquid.
2. Snap or push the complete 2-part lid into locked position.
3. Select variable speed MIN. Turn machine on and slowly increase speed to MAX.
4. Run the machine on High speed for 30 to 60 seconds.
5. Turn off the machine, and rinse and drain the container.
Deep Clean:
Once a month, or as needed
1. Place 3 cups of cool water and 3 cups of white vinegar into the container (add an extra cup of water and
vinegar for a 2ltr jug).
2. Leave to soak for about four hours.
3. Pour contents out and rinse thoroughly.
4. Follow the appropriate cleaning instructions above.
Lid & Lid Plug:
Separate the lid and lid plug. Wash in warm soapy water. Rinse clean under running water, and dry. Reassemble before
use.

18
IMPORTANT: To ensure continued and effective performance, do not put the container, lid, or lid plug in the dishwasher.
WARNING
Electrical Shock Hazard.
Disconnect power before cleaning machine.
Failure to follow instructions can cause death or electrical shock.
Motor Base:
1. Unplug the power cord.
2. Wash the outside surface with a damp soft cloth or sponge, which has been rinsed in a mild solution of liquid
detergent and warm water. Do not place the motor base in water.
3. The centering pad can be removed for more thorough cleaning.
4. Thoroughly clean the drive socket. It may become sticky from use. Use a moistened cotton swab to clean the
grooves around the water-shielded switches. Immediately dry any excess water.
5. Polish with a soft cloth.

19
SPECIFICATIONS
OmniBlend Model I
Motor:
Å3 peak output horsepower motor
Electrical:
240 V, 50/60 Hz, 11.5 AUses a R.S.A. three—prong grounded cord.
Dimensions:
Height: 52 cm
Width: 18,42 cm
Depth: 22,35 cm

To view the complete line of OmniBlend products,
visit www.omniblend.co.za
OmniBlend (Pty) Ltd,3 St. Georges Mall, The Colosseum - Unit 505,Cape Town, 8001
021 012 5999