Model
USB flash memory
The package of this product contains the following items:
□ Product main unit
□ Instruction sheet (this sheet)
Simply insert this product into a USB port of the
controller to write or read data.
Before removing the USB memory from the controller,
check that no data is being read or written.
The LED on the main unit blinks during data transmission
(read/write). Remove the memory after making sure that
the LED is lit.
Run the formatting on a commercial PC.
Select FAT32 for the le system.
※
In the case of a Windows Me user, the LED lamp may
remain lit when the product is removed from the "Task
Tray". This will not pose any problems.
Please observe the following notices that are necessary for
maintaining safety.
· Keep the product away from infants. If the product is
accidentally swallowed by an infant, it may cause suffocation. If
swallowed, see a physician immediately.
· Do not remove the product from the controller or turn the power
OFF while writing or reading data to or from the product. Doing
so may result in the internal data being destroyed or erased.
· Be sure to never disassemble or tamper with the product.
· Do not bend, drop, damage or place heavy objects on the
product.
· It the product becomes wet due to contact with water,
chemicals, oil or other liquids, an accident may occur due to
short-circuiting or electrication. Do not use the product when
wet.
※When formatted, all the data stored in this product will be
erased. Run the formatting process after checking the content of
the data in storage.
※This product cannot be formatted on Mac OS.
■Content of a package
■Component names
■How to install
■How to remove this product from the
controller
■How to remove this product from a PC
■How to format
■
LED lamp indication and the state of this product
How to use
Product specifications
· Keep foreign matter away from the connector. Otherwise a
failure may occur.
· Do not touch the terminal portion (connecting portion) of this
product directly or allow it to come in contact with metals.
Doing so may cause internal data to be erased or destroyed by
static electricity.
· Do not allow the product to be affected by vibration or impact
while writing or reading data or remove it from the controller.
Doing so may cause the internal data to be destroyed.
· We are not liable to compensate for damage or losses of the data
stored in this product irrespective of the content and/or cause of
failure or damage. Users are requested to create backup data
periodically.
· This product has a service life the same as that of the ash
memory. Data writing or reading will be disabled after an
extended period of use.
In such a case, purchase a new product.
· When formatted, all the data stored in this product will be
erased. Run the formatting after checking the content of the data
in storage.
※
We does not provide data recovery or restoration services.
※Names of companies and products described in this instruction
manual are generally the trade marks or registered trade marks
of respective companies. In the text, no ® or TM markings are
used.
State of the product
Normal recognition
During data transfer
When being suspended
LED lamp indication
Lighting
Blinking
Lighting OUT
Interface
Operating current
Operating temperature/humidity
Storage temperature/humidity
Material
Weight
External dimensions
(cap included)
USB 1.1 / 2.0
Memory capacity 2GB
Molel FZ-MEM2G
8GB
FZ-MEM8G
150 mA maximum
0 to 50 °C / 35 to 80 % RH (No condensation)
−
10 to
＋
60 °C / 0 to 80 % RH
PC (Polycarbonate)
Approx. 9.0 g
Approx. 62 mm (L) ×17 mm (W)
×10 mm (H)
USB ash memory
※This product does not operate on Windows98 Second
Edition or Mac OS.
(1)Remove the cap from the product and make connection
to the USB port on the controller.
(2)An LED on this USB memory lights up.
(1)Click the icon on the task bar.
(2)Click the message displayed.
Example of message
”Safely remove USB Mass Storage Device-Drive(G:)”
(3)When the above message appears, remove this product
from the controller.
Example of message
"The 'USB Mass Storage Device' device can now be
safely removed from the system"
This section describes LED lamp indication information when
this product is connected to the controller and PC.
Observe the following precautions to prevent the product from
malfunctioning, becoming inoperable, or the performance and/or the
device from being adversely affected:
· This product is an electronic device. Do not subject it to static
electricity.
· This product may operate in a faulty manner when near a radio
or TV set, audio equipment, motor, or other noise-emitting
equipment. Always use this product away from these items.
· Refrain from storing it in high temperature or high humidity
conditions, in places where the temperature changes sharply, in
dusty locations, in places affected by vibrations or impact, or
near audio speakers or other magnetic items.
PRECAUTIONS FOR CORRECT USE
PRECAUTIONS FOR SAFE USE
INSTRUCTION SHEET
Thank you for selecting OMRON product.This sheet pri-
marily describes precautions required in installing and
operating the product.
Before operating the product, read the sheet thoroughly to
acquire sufficient knowledge of the product. For your con-
venience, keep the sheet at your disposal.
© OMRON Corporation 2012 All Rights Reserved.
OMRON Corporation
Suitability for Use
EUROPE
OMRON EUROPE B.V. Sensor Business Unit
Carl-Benz Str.4, D-71154 Nufringen Germany
Phone:49-7032-811-0 Fax: 49-7032-811-199
NORTH AMERICA
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,IL 60173-5302 U.S.A.
Phone:1-847-843-7900 Fax : 1-847-843-7787
ASIA-PACIFIC
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road #05-05-08(Lobby 2),
Alexandra Technopark, Singapore 119967
Phone : 65-6835-3011 Fax :65-6835-2711
o
THE PRODUCTS CONTAINED IN THIS SHEET ARE NOT SAFETY RATED.
THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF
PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY
COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES.
Please refer to separate catalogs for OMRON's safety rated products.
OMRON shall not be responsible for conformity with any standards, codes, or
regulations that apply to the combination of the products in the customer's
application or use of the product.
Take all necessary steps to determine the suitability of the product for the
systems, machines, and equipment with which it will be used.
Know and observe all prohibitions of use applicable to this product.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL
EQUIPMENT OR SYSTEM.
See also Product catalog for Warranty and Limitation of Liability.
CHINA
OMRON(CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Phone : 86-21-5037-2222 Fax :86-21-5037-2200
OCT, 2009
D
FZ-MEM2G/8G
Cap
Structure for preventing the cap
from being misplaced
USB connector Memory Capacity
(on the back of the product)
