3-OperationModes
Threeoperationmode:PresetPickmode,Presetimmediatemode, Directmode.
PresetPickmode-SetupcodeE1",thescreenpresetareadisplaysthenumberof
thepreset,DOWN "
""/ "UP"switchselectsthepreset,thePC#inthepresetwillnot
besent untilthe"OK"switchispressed.
PS: OnlythePC1#onmidichannel1willbedisplayedonthescreen.
Preset immediatemode-SetupcodeE2",
"thescreenpreset areadisplaysthenumber
ofthepreset,"DOWN"/"UP"switchselectsthepreset, thePC#willbesentimmidiately.
PS:OnlythePC1#onmidichannel1willbedisplayedonthescreen.
Direct mode:SetupcodeE3", thescreenpresetareadisplays “d”,DOWN"""/"UP"
switchchangethePC#whichissentimmidiatelyonall16midichannels.
(Preset7,PC1#is102)
Example1 PresetPickMode
(Preset13,PC1#is195)
Example2 PresetImmidiateMode
(PC#93sentonall midichannels)
Example3 DirectMode
Usercansetupthefavoriteoperationmodeasfollowingsteps-Holdthe “OK/mode”
switchandpowerontheGecko,thescreenwillshowcurrentoperationmode
E1/E2/E3,press “DOWN”/UP”switchtochangethemodecode,hold “OK”toquit
setup. “
4-EditaPreset
InPreset pick/immediatemode, whenapresetisrecalled,hold “OK”footswitchfor
2seconds, GeckostartstoeditthePC#onmidichannel1,UP""/"DOWN"switch
changesthenumber,"OK"switchconfirmsthechange,thengoestothePC#on
thenext midichannel. ThePC#rangeis0~199,and “off”, thePC#willnotbesenton
itschannelifthePC#isset to “off”.Hold"OK"anytimewillquitpreset edit.
EditPC# on
MidiChannel1
Hold “OK”Press “OK”EditPC# on
MidiChannel2 Press “OK”EditPC# on
MidiChannel16
Press “OK”
Hold “OK”toquit
Videotutorial link