One Forall URC 1635 User manual

1
Home
OFA SKY Q
REPLACEMENT REMOTE
UNIVERSAL REPLACEMENT REMOTE
URC 1635 SIMPLE SET UP GUIDE
WELCOME .......................................................................................................................................... 2
INSERT BATTERIES .......................................................................................... 2
KEY TABLE ....................................................................................................................................... 3
LED COLOUR...................................................................................................................................
4
HOW TO SET UP YOUR REMOTE..................................
4
A  SIMPLESET................................................................................
5
B  SETUP BY CODE.........................................................
7
C  LEARNING.....................................................................................
9
SPECIAL FEATURES.........................................................................................
11
KEY MAGIC....................................................................................................................................
11
CHANNEL SHORTCUT MACROS..............................
14
HDMI SELECTION..................................................................................................
15

2
Home
WELCOME, PREPARE YOUR REMOTE FOR INSTALLATION
OPEN THE BATTERY DOOR.
CLOSE THE BATTERY DOOR.
INSERT 2 AAA BATTERIES.

3
Home
1. TV Power –
Switches TV on and o.
TV must be set up rst
– see Setup
2. TV Input –
used to select the correct
HDMI input on your TV.
TV must be set up rst
– see Setup
3. Power –
Switches Sky box on and
o.
4. SKY –
Opens Recordings / Menu
5. ? –
Help info / Accessibility
settings
6. i –
More info
7. Search – Search for a
specic show
8. Rewind –
Press repeatedly
to increase speed
9. Play/pause
10. Fast forward –
Press repeatedly
to increase speed
11. Navigation and
OK (select) buttons
12. Back/Dismiss –
Exits menus or recorded
show
13. Home –
Home Screen
14. … –
Opens sidebar / options
15. Volume up, down and
mute. Can be reassigned
to TV or Sound Bar / AV
Receiver
– see Setup
16. R – Record
17. Channel up/down
18. Coloured buttons –
Interactive services.
Can also be used for
channel shortcuts
– see Channel Shortcuts
19. 0-9 – Type in channel
numbers
Thank you for purchasing the One For All UHD Remote.
This remote is intended as a replacement for the Sky Q Infrared remote control, and also offers the
functionality of controlling the volume and power of your TV or Sound Bar / Audio Video Receiver. The
remote also features handy shortcut macros for easy channel zapping and a powerful all on/off macro.
KEY TABLE
2
3
9
10
6
7
14
13
17
19
1
8
11
12
16
15
18
5
4

4
Home
LED COLOUR
HOW TO SET UP YOUR REMOTE
Under the Power key there is a three colour LED, which helps to show which device you are controlling as
well as helping you to set up your remote. The following colours indicate which device is being controlled or
set up:
Green – TV
Amber – Sound Bar / Audio Video Receiver
Red – Sky / Media Box
SETUP
The OFA UHD remote is pre-programed to control your Sky Q box, just insert batteries and it will work
directly. However it can also be programmed to control the Volume, Mute, Input and Power of your TV, and if
required, the Volume and Mute of your Sound Bar. If you have a different Sky box or a Digital Media box such
as a Now TV or Apple TV, you can also set this up in place of the Sky Q.
You can set up these devices on your remote as follows:

5
Home
Sound Bar / Audio Receiver
1Bose
2Denon
3LG
4Marantz
5Onkyo
6Panasonic / Philips
7Pioneer
8Samsung
9Sony
0Yamaha
Other Sky / Digital Media Box (not necessary for Sky Q)
1Apple
2A C Ryan
3Asus
4Dune
5iOmega
6Microsoft
7Roku
8Sky
9Sony
0Western Digital
If the brand of your device is shown below, you can use the SimpleSet system described on the next page:
If the brand of your device is not shown, please proceed to section B - SETUP BY CODE.
A  SIMPLESET
TV
1Bush
2Grundig
3LG
4Panasonic
5Philips
6Samsung / Sharp
7Sony
8TCL / Thomson
9Toshiba
HOW TO SET UP YOUR REMOTE

6
Home
To set up your device:
1. Turn on your device (not on standby) and point the OFA remote towards it.
2. To set up:
TV
Hold down TV Power and SKY Power until the Green LED under the Power key blinks twice.
AUDIO, RECEIVER, SOUND BAR
Hold down Volume + and Volume – until the Amber LED under the Power key blinks twice.
OTHER SKY / DIGITAL MEDIA BOX
Hold down Channel + and Channel - until the red LED under the Power key blinks twice.
3. Hold down the digit for your brand and device as listed left (e.g. 6 for Samsung TV).
4. For TV and SKY or Digital Media Box the remote will send Power every 3 seconds until your device
switches off . For AV Receiver or Sound Bar the remote will send Mute until your device Mutes volume.
5. As soon as your device switches off (or mutes), release the digit.
6. The LED will blink twice and the remote should now operate your device.
• If you find one or more keys do not work as you expect, start again at step 2 – the remote will start with
the next code in the memory.
HOW TO SET UP YOUR REMOTE

7
Home
If the brand of your device is not listed in the SimpleSet feature, you can set up by trying codes individually.
To do this:
1. Turn on your device (not on standby) and point the OFA remote towards it.
2. To set up:
TV
Hold down TV Power and SKY Power until the Green LED under the Power key blinks twice.
AUDIO ¬RECEIVER, SOUND BAR
Hold down Volume + and Volume – until the Amber LED under the Power key blinks twice.
OTHER SKY / DIGITAL MEDIA BOX
Hold down Channel + and Channel - until the red LED under the Power key blinks twice.
3. Enter the first 4 digit code listed for your brand (e.g. 4142 for Technika).
4. The LED will blink twice.
5. Now aim the remote towards your device and press the Power (or Mute*) key.
6. If the device turns off (or mutes*), your remote is ready to use. If not, repeat steps 2-5 with the next code
in the list.
* If you are setting up an Audio Video Receiver or Sound Bar, please try the Mute key during step 5.
HOW TO SET UP YOUR REMOTE
B  SETUP BY CODE

8
Home
AFTER SIMPLESET OF CODE SETUP
Your One For All remote can operate up to three devices. By default the remote is pre-programmed to
control your Sky Q box, but you can control some functions of your TV and Sound Bar or Audio Video
Receiver
If you set up a TV, the Volume Up, Down, Mute, TV Power and TV Input keys will then control your TV.
If you then also set up an Audio Device such as a Sound Bar or Audio Video Receiver, the remote will then
control the Volume Up, Down and Mute of that device.
Power Macro
If you have set up your remote to control more than one device, such as a TV and/or Audio device you can
turn them all on or off by simply holding down the Sky Power key for 3 seconds. The remote will first send
Power to the Sky Box, and then to TV and Audio (if applicable).
AV Shift
As the AV key is intended to select the input on your TV and most TVs use a menu to select from a list
of inputs, when the AV key is pressed and a TV is set up, the Menu Up, Down, Left, Right and OK keys
temporarily control the TV. If the OK key is pressed, or no key is pressed for ten seconds, these keys will
revert to controlling your Sky Box.

9
Home
Your One For All remote control can learn any function from any other working remote control. This is a
quick and easy one-time setup that allows you to control any infrared controlled device you have in your
living room. You can even combine multiple devices in one easy to use remote control – for example you
could teach the volume keys to control your Sound Bar, the TV Power and Input keys to control your TV, and
the rest of the keys to control a Set Top Box (Satellite, Cable or Freeview Receiver).
To do this, firstly make sure you have all your original remote controls to hand, and that they have working
batteries in.
To learn functions, the original remote should be approximately 3cm from the OFA remote, pointing
towards it as shown below:
1. Hold down 1 and 3 until the red LED blinks twice.
2. Press and release the key you want to learn a function onto (for example the TV
Power key) – The red LED will blink continuously.
3. Press and release* the corresponding key on the original remote, for example
Power.
4. The red LED will blink twice to indicate the key has been learned correctly.
5. Repeat steps 2 and 3 for each key you want to learn – remember you can learn from multiple remotes,
but only one function per key.
6. When you have learned all the functions you require, press and hold the OK key
until the red LED blinks twice.
HOW TO SET UP YOUR REMOTE
C  LEARNING
2 - 5 CM
2 - 5 CM
GUIDE

10
Home
Hints:
• If the red LED shows one long blink at step 4, the function was not learned correctly, please try again
from step 2.
• If you find one or more keys don’t work properly after set up, you can re-enter the learning mode at any
time by repeating the procedure from step 1.
• To delete a learned function, hold down 7 ( )and 9 ( ) until the red LED blinks twice, and press the
key to delete twice.
• If one or more of your original remotes aren’t working, you can still set up the One For All remote by
SimpleSet (A) or Code Set Up (B).
* Some remotes send commands differently. If you find a function cannot be learned, try holding down
the key on the original remote instead of pressing and releasing.