One Remote 2415 User manual

Page 4
Operating with Beolink 1000
Beolink 1000 does not have as many
keys as the receiver’s original remote
control. Thus certain Beolink 1000
keys have got alternative function-
ality. To get to this phas to be
pressed first, i.e. pfollowed by
pon a Beolink 1000
corresponds to OK on the original
remote control.
The table shows how special Beolink
1000 key operations translate to ope-
rations of the original remote control.
To be able to operate the receiver cor-
rectly with the Beolink 1000 the user
has to be familiar with operations with
the original remote control as descri-
bed in the receiver’s user manual.
The receiver is automatically turned
on when selecting its source on the
TV with Vtape, DVD, Vaux etc.
We call this function i.
There is therefore no physical button
on the Beolink 1000 named source.
Beolink 1000 Operation
pp OK
gVideo
q
TV
x
Exit
rRadio
pC Bouquet+
pV Bouquet-
pZ <
pX >
p1 Menu
p2 Audio
p3 Info
p4 Help
p5 Text
i
Power on
i
fq Power off
Beolink 1000 Function
hZQ
hXW
hCR
hVE
Beocompatible Operation via
Oneremote Interface Type 2415
for Dreambox DM 7000
Beo4 and Beolink 1000 are remote control terminals from Bang & Olufsen. Oneremote supplies interface modules that allow third party equipment to be operated via a Bamg & Olufsen remote control system.
made in the EU by www.oneremote.dk
Type 2415v1

Page 2
Congratulations
With the interface module INT2 from
www.oneremote.dk installed inside your
satellite receiver and connected to a Bang &
Olufsen TV you can operate the receiver
with your Bang & Olufsen remote control
terminal.
This user guide tells you how.
Plug and Play
The receiver can be connected directly to a
vacant linkequipped AV socket on the Bang
& Olufsen TV.
Following the correct programming of the
AV connection the receiver is ready to
operate. For programming of the AV
connection check the Bang & Olufsen TV
User Manual.
If the Bang & Olufsen TV does not have a
vacant useable AV socket a Oneremote AV
Selector can be supplied.
Bang & Olufsen Remote Controls
With your beocompatible* receiver
connected to a Bang & Olufsen TV you may
operate it with your Beolink 1000, 5000,
7000 or Beo4.
With Beo4 the operation is slightly easier.
Thus Beo4 is the recommended remote
control for this receiver.
Operation in a Beolink Videosystem
In a Bang & Olufsen Beolink videosystem
full operability is ensured in all link rooms.
*Beocompatible means that the equipment can be
operated with a Bang & Olufsen remote control when
connected to a Bang & Olufsen TV.
Page 3
Operating with Beo4
Beo4 does not have as many keys as the
receiver’s original remote control. Thus
certain Beo4 keys have got alternative func-
tionality. To get to this Ohas to be pres-
sed first, i.e. Ofollowed by Oon a
Beo4 corresponds to OK on the original
remote control.
The table shows how special Beo4 key
operations translate to operations of the
original remote control.
To be able to operate the receiver correctly
with the Beo4 the user has to be familiar
with operations with the original remote
control as described in the receiver’s user
manual.
The receiver is automatically turned on
when selecting its source on the TV with
Vtape, DVD, Vaux etc. We call this
function i.
There is therefore no physical button on the
Beo4 named source.
,
Beo4 Operation
q
TV
e
Exit
oQDream
oWText
oRInfo
oERadio
oo OK
oD Bouquet+
oF Bouquet-
oA < / AV
oS > / -/--
o1 Menu
o2 Audio
o3 Info
o4 Help
i
Power on
i
fq Power off