OnPoint OPG8BJAASSPSS User manual

BLENDER
SAFETY INFORMATION ........... 3
PARTS INCLUDED .................... 4
GETTING STARTED.................. 5
USING THE BLENDER.............. 6
CARE AND CLEANING............... 7
LIMITED WARRANTY............. 9
CONSUMER SUPPORT ............. 10
OWNER’S MANUAL
OPG8BJAASSPSS
ENGLISH/FRANÇAIS/
ESPAÑOL
Write the model and serial numbers here:
Model #
Serial #
Find these numbers on a label
on the back of the unit.

2

3
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
WARNING THE CUTTING TOOLS HAVE VERY SHARP EDGES.
IMPORTANT SAFEGUARDS
Always follow these safety precautions when using this appliance.
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS
BEFORE USING YOUR BLENDER. POLARIZED PLUG
WARNING: To reduce the risk of electric shock, this appliance
has a polarized plug (one blade is wider than the other). This plug
will fit into a polarized outlet only one way. If the plug does not fit
fully into the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper outlet.
DO NOT modify the plug in any way.
WARNING: Extension cords are not recommended for use with
this product.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1. Remove utensils prior to processing. Failure to remove may
cause the jar to be damaged or to shatter which may cause
personal injury.
2. Do not blend hot liquids, doing so may cause excessive
pressure build-up, resulting in risk of the user being burned.
3. To protect against electrical shock, do not submerge the
appliance or allow the power cord to come into contact with
water or any other liquid.
4. DO NOT allow the appliance to be used by children. Close
supervision is necessary when used near children. This is not
a toy.
5. Never leave an appliance unattended when in use.
6. Appliance accessories are not intended to be used in the
microwave as it may result in damage to the accessories.
7. Turn the appliance Off and remove the power cord from
the electrical outlet when not in use, before assembling or
disassembling parts and before cleaning. To unplug, grasp
the plug and pull from the electrical outlet. Never pull from the
power cord.
8. DO NOT abuse the power cord. Never carry the appliance by
the power cord or yank it to disconnect from electrical outlet;
instead grasp the plug and pull to disconnect.
9. DO NOT operate any appliance with a damaged cord or plug,
or after the appliance malfunctions, has been dropped or
damaged in any manner. This appliance has no serviceable
parts. Return the appliance to Operating LLC for examination,
repair or adjustment.
10.DO NOT let the power cord hang over the edge of table or
counter or touch hot surfaces such as the stove.
11.Always use appliance on a dry, level surface.
12.Keep hands, hair, clothing, as well as utensils out of container
while processing to reduce the risk of severe injury to persons
or damage to the appliance. A scraper may be used but only
when the appliance is not running.
13.Avoid contact with moving parts.
14.DO NOT attempt to sharpen blades.
15. DO NOT use the appliance if blade assemblies are bent or
damaged.
16. DO NOT operate this appliance on or near any hot surfaces
(such as gas or electric burner or in a heated oven).
17. The use of attachments or accessories including canning
jars, not recommended by the manufacturer may result in fire,
electric shock or personal injury.
18. DO NOT remove the container from the motor base while the
appliance is in operation.
19. To reduce the risk of injury, NEVER operate the appliance
without the lid in place; DO NOT try to defeat the interlock
mechanism; make sure that the attachment is properly
installed before operating the appliance.
20. DO NOT expose containers to extreme temperature changes.
21.DO NOT overfill.
22. DO NOT operate the appliance empty.
23. If the appliance overheats, a thermal switch will become
activated and shut off the motor. To reset, unplug the
appliance and let it cool down for approximately 15 minutes
before using again.
24. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE
ONLY. Do not use this appliance for anything other than its
intended use. Do not use outdoors.
WARNING RISK OF FIRE OR ELECTRIC SHOCK
■TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). ■Do not attempt to repair or replace any part of your blender unless it is specifically recommended in this
manual. All other servicing should be performed by
authorized service personnel.
READ AND SAVE THESE INSTRUCTIONS
SAFETY INFORMATION

4
PARTS INCLUDED
Parts Included
E
D
G
H
Start
Pause
Pulse B
F
C
Start / Pause Button
Pulse Button
Control Knob
Blender Pitcher
Lid
Blender go-cup
Blender go-cup lid
Blender go-cup blade attachment
NOTE: Model numbers include different pieces.
G8BJAASSPSS: Includes blender only
G8BCAASSPSS Includes blender and blender go-cups
A
B
C
D
E
F
G
H

5
Getting Started
Before First Use
PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN
MIND WHEN USING THE APPLIANCE:
IMPORTANT: Make sure that the motor base is plugged
in for use.
IMPORTANT: DO NOT attempt to operate the appliance
without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not intended to
be used in the microwave as it may result in damage to
the accessories.
CAUTION Do not immerse the motor base into
water or any other liquid.
1. Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2. Wash the lids and pitcher in warm, soapy water. When
washing the blade assemblies, use a dish-washing
utensil with a handle to avoid direct hand contact with
blades.
WARNING Handle with care when washing, as the
blades are sharp.
3. Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air drythoroughly.
4. The pitcher and lids are all dishwasher safe. It is
recommended that the lids be placed on the top rack.
5. Wipe the motor base clean with a damp cloth.
GETTING STARTED

6
USING THE BLENDER
Using the Blender
WARNING Remove utensils prior to processing.
Failure to remove may cause the pitcher to be damaged
or to shatter, which may cause personalinjury.
WARNING: Never leave the appliance unattended while
in use.
CAUTION Do not blend hot liquids, doing so may
cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in
for use.
*It’s best to add the liquid ingredients first and then the dry
ingredients.*
1. Review warning and caution statements above before
proceeding to number 2.
2. Place the motor base on a clean, dry, level surface
such as a counter or tabletop.
3. Align and lower the pitcher onto the motor base. Handle
should be on the right side of on the motor base.
4. Rotate the blender pitcher clockwise until it clicks in
place.
5. Add the ingredients to the pitcher, making sure that they
do not exceed the highest measured marking line on
the side of the pitcher.
NOTE: If you need to add additional ingredients while the
appliance is processing, open the pour spout cap and
pour the ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
“Max liquid” mark (64 oz.) on the pitcher.
6. Plug the power cord into the electrical outlet and press
the power button.
IMPORTANT: As a safety feature, the motor will not work
if the pitcher is not installed correctly.
7. Holding the lid by the handle, align the pour spouts on
the lid and bowl. Push lid into bowl to form a suction
seal.
8. Review warning and caution statements before
proceeding.
9. Turn the knob to the desired speed. Then press the
Start button or Pulse button to power on the unit.
10. When you have reached your desired consistency,
stop the appliance by returning the knob upright to the
Off position and wait for the blades to stop turning.
11. Turn the pitcher counter-clockwise to lift off thebase.
WARNING Never insert your hands in the pitcher as
the blades are sharp. Always use a spatula to dislodge
food that has stuck to the sides of thepitcher.
12. Depending on the consistency of the contents in the
container, remove the lid and use the spout to empty
liquid contents.
13. Make sure that the unit is unplugged when not in use.

7
Care and Cleaning
CAUTION Make sure that the motor base is
unplugged from the power source before insertingor
removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into water
or any other liquid.
1. Separate/remove all parts from each other.
2. Hand Washing: Wash the lid and pitcher in warm,
soapy water. When washing the blades, use a
dishwashing utensil with a handle to avoid direct hand
contact with blades. Handle with care to avoid contact
with blades. Rinse and air dry thoroughly.
Dishwasher: The containers and lids are all dishwasher
safe. The lid is top rack dishwasher safe.
WARNING Handle the blade assemblies with care
when washing, as the blades are sharp. Contact with the
blades’ edges can result in laceration.
3. Wipe the motor base clean with a damp cloth.
CARE AND CLEANING

8
Notes
NOTES

9
Small Appliances Limited Warranty
Pleasehaveyourserialnumberandyourmodelnumberavailablewhenrequesting
service at https://www.onpointwarranty.com/small-appliances-cx-portal
For Terms and Conditions, please visit
https://f.hubspotusercontent20.net/hubfs/4854028/GE_First%20Build/RefurbGoodsT&C.pdf
Staple your receipt here. Proof of the original purchase date is needed to obtain service under the warranty.
LIMITED WARRANTY

10
CONSUMER SUPPORT
Consumer Support
Service and Registration
Register your new appliance on-line at your convenience! Timely product registration will allow for enhanced
communication and prompt service under the terms of your warranty, should the need arise.
Register your appliance at https://www.onpointwarranty.com/small-appliances-cx-portal
Contact Us
If you are not satisfied with the service you receive from OnPoint Warranty, contact us on our Website with all the
details including your phone number, or write to: 9900 Corporate Campus Drive, Suite 2050, Louisville, KY 40223