Onq 1060 User manual

15-0419
Press this key To
PROGRAMMING A OEVICE
A QUICK LOOK AT THE ON-Q CONTROLS
Unlocking aSingle Device's Volume Control
~: r,;~~~ :~dhi~ktslT~~' :~~t~~Dr'e~~~5~1'i~~~)twice, then release.
3. Enter 99 3. The LED blinks twice.
4. and then press VDL·. The LED blinks four times. Volume is
independently controlled for Ihe selected devices.
Restoring Original Key Function
I. Press the device key for which you wish to remove the keymoved data
2. ~:e~ :~~e~~~~ ;Elup until the LED blinks twice, then release.
3. Enter 994.The I.EUblinks twice.
4. Press the key you wish to remove the keymoved data from twice. The
LED blinks twice.
5. Repeat steps 1-4 for additional keys you wish to remove.
Your On-Q universal remole control includes the ability to program any key
(other than the SETUP key) witha Macro function. Each onecan beset upto
perform apre-programmed set of sequential key presses with the press of ~ne
key. A macro can be used to control a home theater operation, to set a favortte
channcl,or for other multiple functions you would like to control with one key
V~~s~~~f~~;~:;,e~c~a~~~~a~etp~~~t~~~;Jfe~; ;n'h~~~~dt~~~~ are in, or
one that only operates when you are in a specific mode.
NOTE: Programming a new macro over an existing one erases the original
macro.
RestoringAII Keymoved Data in aSpecific Mode
I. Press and hold SETUP until the LED Rashes twice, then release.
2. Press 9 9 4. The LED blinks twice
3. Press the device key you wish to remove all keymoved data from twice.
The LED blinks twice.
4. Repeat for each device you want to restore.
Setup Codes for Audio Amplifiers
Setup Codes for Home Systems
On-QII.<f/,nd
PROGRAMMING MACROS
MANUFACTURER'S COOES
PROBLEM: LED does not blink when you press a key.
SOLUTION: Try pressing different keys. Replace the balleries with 2 new AA
batteries.
PROBLEM: LED blinks when you preSS;J key, but device does not respond.
SOLUTION: Make sure the remote is aimed at your device and is not more than
40 feet away.
PROBLEM: LED blinks one long blink while in SETUP mode.
SOLUTION: An entry error has occurred (for example, wrong key). Try entering
lhesequenceagain.
PROBLEM: Remote does not control devices or commands arc not working
properly.
SOLUTION: Try all listed codes for the device. L\bkesure the device 0perates
withaninfraredremoteconlrol.
PROBLEM: CH+, CH-,and LAST do not work for your RCA TV.
SOLUTION: Due to RCA design from 1983 to 1987,only the original remote
control will operate these functions.
PROBLEM: No volume on a device.
SOLUTION: Sec «Changing Volume Lock" and make sure the volume is not
locked to a different mode already.
PROBLEM: Channels do not change properly when directly entering digits to
changechanne1s.
SOLUTION: If the original remote control required you to press Enter 10 change
channels, press Enteron this remote after entering the channel number.
I. Press and hold in the SETUP key the red LED blinks twice, then release.
2. Enter 977.The LED will blink four times.
USING KEYMOVER
Programming aMode-Independent Macro
I. Press and hold SETUP untillhe red I.ED hlinks twice, then release.
2. Press 99 5. The LED blinks twice.
3. Press the key you wish to assign a macro on.
4. Enter the series of commands you want the macro to execute (up to 15
commands).
5. Press and hold SETUP until the red LED blinks twice, then release.
~:;~:~dns ~~~ ~~:: ~~~e~;d:~~;~dl~s~~ ~,~~t::d~ ;~~~~et~~.~:::~~~lple,
you could program:J. macro key to turn on both your TV and cable box and
select aparticular channel.
To dear the macro, repeated steps 1-5 above, but do not coter;J series of
commands at step 4.
Moving Keys to aDifferent Device Mode
This lets you, for examplc, control DVD functions while in TV mode. You
would move the transport key functions (Play, Stop, etc.) from DVD mode to
TV mode,as follows:
I. Press and hold SETUP untillhe LED blinks twice, then release.
2. Press 9 9 4. The LED blinks twice.
3. Press the device key that contains lhe function you want to move ( e.g.,
DVD).
4. Press the key you want to move {e.g., Play}.
5. Press the device kev that you want to move the function 10.(e.g.,TV).
6. Press the key in the new mode that should perform the function (e.g.,
Play). The I.ED blinks twice.
7. Repeat steps 1-6 to move additional keys.
Programming aMode-Dependent Macro
I. Press a device key (TV. VCR/OVD, CBU SAT, eIC.).
2. Press and hold SETUP until the LED blinks twice, then release.
3. Press 9 7 8.TheLEDblinks twice.
4. Press the key,You wish to assign a macro on.
5. Enler the serIes of commands you want the macro to execute (up to IS
commands).
6. Press and hold SETUP until the red LED blinks twice, then release.
Now, when you press the macro key, the remote sends the series ofcommands
you have entered, but only if you are in the modeyou selccted in step I. For
example, you could program the macro key to turn on both your TV and cable
box and seleci aparticular channel,bul only if you are in TV r:t0de.lf you arc
in DVD mode, thIS key docs not execute the macro you set up III TV mode.
To clear the macro, repeat steps 1-6 above, but do not enter a series of
commands at step 5.
TROUBLESHOOTING
Your On-Q universal remote control includes a KCy!l!r)l'<;r feature that allows
you to map (or copy) keys from one mode (i .. e., source mode) to another mode
(i.e.,destination mode) or to adifferent key In the same mode.
NOTE: Do not use any of the Device Keys, POWER, RECORD, or SETUP as a
source or destination key.
Moving Keys in the Same Device Mode
~: ~~:~~ ~~lhi~fd kslT(~·~~~~~DLi~~i~f~~~i~~, lhen release.
3. Press 9 9 4. The LED blinks twice.
4. Press lhe key you want to move.
S. Press the new key that should perform the function. The LED blinks
tWIce.
6. Repeat until you arc finished moving keys.
00000
00000
00000
AUXl Code:
AUDCode:
DVDCode:
I.
2.
J.
4.
Deleting aSingle Learning Key
~:r~~i.~c:~~~e~[:ond;~~ekl!a~~~~ ~~~~i~%~i~~b~~~~~r~~ ~h~iffc~~~tu
function to the key (see "Programming a Learned Key").
NOTE: If more than 10 seconds pass between key presses, the remote exits pro-
gramming.
~~~~ ~~~ ~~~e Sk;fuW~:'~IUt~~stE~ ~~~~~~~~~~~~;:~e~::s~om.
Enter 976. The LED blinks twice.
Press t~e key containing the learned functio.n to be deleted twice. The
LED bhnks twice and exits from programmmg.
Deleting All Learned Keys in aSpecific Mode
NOTE: If more than 10 seconds pass between key presses, the remote exits
programming.
1. Press and hold SETUP until the LED blinks twice, then release.
2. Press 9 7 6.The LED blinks twice.
3. Press a mode key twice (i.e., TV. VCRlDVD, CBU SAT, etc.) to clear all the
learned keys for that mode. The LED blinks twice and exits from
programming.
CHANGING VOLUME LOCK
The On-Q universal remote control comes preset to allow independent volume
control of each selected device (Global Volume Unlock). However, you may
change th~ Volume Lock selling to Global Volume Lock so that one device's
volume WIll control volume in all other modes. After that, you can perform
Individual Volume Unlock on a selected device to set its volume control for
independent operation or Global Volume Unlock to remove all volume locking.
Locking Volume Control to One Mode (Global Volume Lock)
1. Press and hold SETUP until the red LED blinks twice, then release.
2. Entergg 3,the LED blinks twice.
3. Press the mode key for the device you want to control (for example, TV).
4. The LED blinks tWice. Now when you press VOl+, VOL-,or Mute, the
selected device (for example, TV) controls the volume regardless of the
current mode.
Unlocking All Volume Control (Restoring Global Unlock)
I. Press and hold SETUP until the red LED blinks twice, then release.
2. Enter 993,the LED blinks twice.
3. Press VOL+. The LED blinks four times. Volume is independently
controlled for all programmed devices.
Programming a learned Key
NOTE: If more than 10 seconds pass between key presses, the remote exits pro-
gramming.
Place the On-Qremote head-to-head (about 2" apart) from your original
remotecontrol.Also locate the key (on your original remotecontr 01) that
you want the Potenza to learn. Press the mode key you wish to learn keys
00.
2. Press and hold SETUP until the LED blinks twice, then rekase.
3. Enter 97 5. The LED blinks twice.
NOTE: If the LED displays one long flash instead, either your batteries are low,
or the On-Q remote has a memory fault. [n either case, the remote can-
nOllearnanewkey.
4. Press the key on the remote you wish to learn onto. The feedback LED
will blink rapidly for three seconds, suggesting the remote is ready to
learn.
5. On the original remote, press and hold the key to be learned.Continue
holding the key on the original remote until the On-Q remote's LED
blinks twice.
NOTE: If the LED displays one long blink,a learning error has occurred. Try
repeatin~thisstepagainuntilasuccessfulca~lUreoccurs.lfthefunc-
~~~ie~' ~~~ ~~;~::i~~~~~~::~ti;;~ ~b~v~.~~e;d:d:~rs~o;;~~~:·~~gl~~d
shooting" bclow. After review,slart programming again al step I.
6. ~~~~a;;~e~:v~ ~~~~~;lf:a~~f~~~llk~:!s~~r~~su~~~t~:~ ~e;{~po~~~il
the LED blinks twice to save all data learned.
Code Device Group
lV/TV.)
learning Precautions
Your original remote comrols must be in working order for learning to work
properly.
Learned keys are mode-specific, so each one can store aunique functionfore;lch
moo,
Do nol Ust the following keys for learning: Device Keys, SETUP. or Record (ej.
Lcarningcapacityisapproximatdy42to75kc)"S.dcpcndingonthecodebeing
learned
Certaindeviccfunetionsarenollearnableinc1udingmulti-frcqucncytypcs,some
high frcquencyoncs,and other unusuat formats.
f"OrDptimum learning, avoid high levels of am bien I light such as naturalsunlightor
energy-efficielll
f1uoresccnl lights
NOTE: Please have your original remote controls handy before programming
learning.
Clbk(CobkCnnl·'rtm,VoJ",A<" .. nri ... S.trllit<
R«<ovm)
~~:i~ctvJ;s~~;;~~~)~~~~~lci~~I:J~sf~n~~i~~~nt~:~~~~r~~i~~~:y~~~I~~~~
entertainment devices (e.g.,VCR Tracking Up or Down). However, there are some
considerations.
CHECKING THE COOES
~·CR(VCR<.[)VI)rbw')
Audio(AudioAmplifi,.... AudioAmplTun'.... CD
pbyn.)
USING LEARNING
If you have set up the remote.using the p.rocedure in «Searching for Your Code",
you may need to find out whIch five-digll code is operating your equipment.
For example, to find out which code is assigned to your TV:
1. Press TV once.
2. Press and hold SETUP until the red LED blinks twice, then release.
3. Enter 9 9 O.The LEDblip.ks twice .
4. To view the code for the first digit, press 1.Count the LEi? blinks (for
example, three bliryk~ = 3), and wnte down the number In the
appropriate code hstmg at the top of this column.
NOTE: If a code digit is 0, the LED does not blink.
5. ;70~~~;t~~~f~i~i~~4f~~; tr;;nf~~r\~gd~~1:~~nut5fo~ ~h~ ~f~h~i~it~ digit,
6. To check for other deVIce codes, repeat steps 1-5, substitutmg the
device key the desired mode you would like to check.
SEARCHING FOR YOUR COOE
If your device does not respo.nd to t~e remote after ~rying all codes listed for
your brand, or If your brand .IS not hsted, try searchlOg for your code:
I. Turn the device you vmh to control on.
2 Press a device key once.
3. Press and hold SETUP until the red LED blinks twice, then release.
4. Enter 9 9 1, then the device group number (see table below). The LED
blinks twice.
S. Aim the remote at the device and press P.ower Off. The remote sends [R
codes from its library to the selected deVIce, slarting with the most
popularcodefirst.lfthedeviceresponds,go to step 7.
6. If thedevice does not respond, press CH+ and the remote will test the
next code for that device type. Continue to press CH+ untillhe device
turns off.
~.ote: ~~~~ t~~~ ~~~11t:ee 1o~e;jOth~ ~~~;~ct code, press SETUP 10 save the code
that worked for your device. The LED will blink twice to indicate that the
code has been saved. To search for other device codes, repeat steps I to
5.
00000
00000
00000
Used for product setup
Move the cursor in the menu screens .
Press OK to choose the highlighted menu option.
Exit the selected device's menu,guide,or
program without making a menu selection.
Display the program guide for the selected device.
Directly enter channels (.for example, 09 or 31) .
Press Enter to send channel number entries on
some TV models.
View the current channel and program
information.
Raise or lower the sound leveL
Press MUTE to lurn the sound offoron.
Display the menu for the selected device .
lyriQ conlrol in On-Q mode:
L- Local source select
<>- lyriQ source select up & down
i-lyriQdigitalmusicsource
whole house - puts lyriQ into whole house mode
room - places lyriQ into room mode
mule -turns lyriQ sound on or off when in room
mode or all in whole house mode
'1011'/'101- -adjusts the volume oflyriQ
On-Q LCDrrV Display Interface Control in
lyriQ Mode:
VOL+/- - controls the volume
MUTE -turns off the device volume
Compass/OK - compass LEFT/R[GHT places
images into sequence. UP/DOWN changes the
sequence speed.
1-4 -willselectvideoinputl-4
R,G,Y,B - will select video input 1-4 as well
Power Button (shown at left) will power the LCD
Skip backward, rewind, fast forward,skip
forward,stop,pause,orplaytrackson thecunent
disc.
Turn the selected device on or off.
Select the next or previous channeL
Select next or previous chapler on some models of
DVDplayers.
Press LAST to recall the last-viewed channel.
Select a device.
YOllr Oo-Q universal remole conlrol requires 2 AA
batteries.
On-O Home Systems Remote 1060
INTRODUCTION
Thank you for purchasing an On-Q universal remote
~~~t~~~y~~~~::~~~~I;~~r~~~~ng~IJ ~rt~~ t~~~~~~r with
remote is ready to control On-Q systems from any mode.
After instaJlingbattcrics, you can program the On-Q
universal femole control to conlrol your TV, VCR or DVD,
Cable or Satellite Receivers,Amplifier or Tuncr,and
Auxiliary devices.
To do so, follow the instructions in
"Programming a Device",
For best results, please read and follow all the remaining
instructions.Also,keep this guide for future reference.
INSTALLING BATTERIES
CD Code:
TV Code:
I8
---
-
@GO@
~
• •
• •
••••
I
8
I8
..
I~'
GC'JD
al~.
al0D
•
•
<jgJ
NOT/;: Dcvice bUfton ONQ call NOT be programmed
To program this remote to control home thea~er devices, follow the steps below.
Belore proceeding, find the code~ for the devIces you want to.program in
"Manufacturer's Codes" on the flght side of this page and wflte them down or
highlight them.
I. Turn on the device (for example, DVD player) and, if needed, load media
(forcxample,JDVD).
1. Press a device keyon the remote that you wish to program (TV. VCRlDVD,
CBU SAT, etc.).
3. Press and hold SETUP until the red LED blinks twice, then releJse.
4. Enter the first five-digit code for thedevi~e. and brand that you wish to
program. The LED blInks once as each dIgIt IS entered. [fthe code is
valid, the LED blinks twice.
NOTE: If the LED does not blink twice, repeat steps 2 to 4 and try entering the
code again.
5 Aim the remote at the device and press Power Off. The device should
turn off. If it does nOI, repeat steps 3-S,tryingeach code for your brand
until you find one that works. If you cannot find a code that works, see
«Searching for Your Code".
6. ~eere~:~:~~~~i~:~~\:~r ~~;ho::e:k1~;iJ:~i~~~~\den:~~h~f~I~~v~~~~~~:t~
CBUSATCode:
To Install Batteries:
I. Open the battery compartment cover (localed on the back of Ihe
remote).
) Place the AA batteries in the compartment and match the +and-
polarity symbols inside.
3. Replace the cover.
NOTE: When the banery voltage is low, the feedback LED will blink 5 times
aftcrakeypress.
Batlery Use And Safety
'Useonly fresh batteries of the required size and
recommended type.
hatler ies (stan:E~d.~\b;~~:~~~~h:;~~:~1~):~s; ~~~~;;~;~6fee~a~:eries
ofdifferent capacities.
If you do not plan to use.the remote for an extended p~riod, remove the
battery. 1t can leak chemIcals that can destroy elcctromc parts.
WARNING: Disposeof old batteries promptly and properly. Do nOI burn or bury
them.
~
. _.
.. _.
. -.
GJ_EJ

www.onqlegrand.com
Setup Codes for Audio Accessories
Setup Codes for Audio Receivers
ADOOS31
,"'
II(
,\113",JI1"",.<lJIM,JO.WI •. ''',;JI,JI2b<>,JI:;I·1
Jllm.311oq._\(l1~9 • .I0~"I.JI'~"
.'IO!.\.IOlI;-l,.\(lOl,I,'OI!l.JOIM,.lOj(l!,.105.11,3O<>70
'107~
JI.~lII,JI51~.\()J\I'j.JO.l>7.JIJIl.'\,JI.'I(, •. '154I\,31~.l3.
\170.\'17M
.'II~" .. \I"N . .'()I~". ~J.l~I.,~'~"I>.'I!<,(>
.'IOJ.\,.~.oI4>.'"I'«l,.lOJ.l.I •. ~',;-'I,.'Ot>.~I •. 'IJM
R'f,<nt
,h,,1'
'h"f"'rln"'t<
JIO,~ JI·HI,JI~5lI..\17S9, .llon ~)II>I\,JI>li~, .\1-100,
.\1;';1\, .\lo51\.\j75l1.JI~S~
Setup Codes for Cable Converters
111~i7,()Mii,OOH7.0C00()8
10lJ0()(),~{KII~4,OOI07."I·IAA
P.""!',,,"
OIR77.00~7i,004n.OO!.l7.0C00()},IlO)(l(l('.lIOOOl\OOOI2
IJOOli,OISIO
Setup Codes for CablelPVR Combos
J"",I<I
S"f"'rc.l>l<
Setup Codes for CD Players

800-321-2343
(;.".~
I<rrolJ
' .....
\1"", ... "
1O'<-.1Illl~1(J1;.j,1(J'Il<
'Ilf,!<>'.IOON.JOb,.JOD.Il\,\011lO,1Q.I\'
JUUOO • .lOOj~.JODJ7 •.lOO/I; •• IOI;~.,lO,lOS.,lOJ9J.
JO.iro._
''''
,--.
!Jl"Jl
JOliOO..JOOJ! •. \01;9.J01M •. IOI!o.,l(~
1I0t>!.JOOJ1 •. IQO.iJ • .lOIT'I • .lQJ.4'>',\041O • .!'JoIM
JOO(IO,JOOlI • .'O{I~7, 1(J17~.)4lINJ •.\II\(I;,.IQ·l!O •. IIlt611
...,.., .....
' .....
N541J.~m71.mOJ.!I.ltlt.ll46!.ll-49O,ll.)!.
217eol
lU"J.~<J9.~lOl>7"'~"ll!tJO.ll:!to7,lU~
Setup Codes for DVD Players
-
Mrp:o
"-,p,rtD't,ul
10'\'.lllo,l,lO,I1.107".!G;<;I.I,!lI;'Ilo.,.!0797,!OA.JO.
110lH.!IRlo.lI05o>,!10l>1.llIOO
Srn"IfJ-s. .......
Sh"p
~b"r"nll
21541l.2IS&8
l0541J.ro51J.!05J9.lilt>'JS,211HS,111>4,'I541J.llloM,
llnJ9
'071!4.'070S.!0770.!UlI.l-','ON,~,'IIi>'J,lIITl.111J4,
,1,41
1.1I .... "',0<
Setup Codes for OVD/PVR Combos
Controlled by the DVD
217M
HIOl
'""""'"''"'''.'"'''.'''''.,"'~.'M'''_'. i~~~i~~~
~IOH~IR7"1109'l.111~~11Q.l.217)4l Sh .. p
~-:'------~~-;;:;:;-----
'-==--------'--------

IS-0419
Controlled by the VCR
Setup Codes for Home Automation
Satellite Receivers and OVRlPVR Systems
Setup Codes for Satellite Receivers
Setup Codes for OVRlPVR Systems
Controlled by the Satellite
Controlled by the VCR
Setup Codes for TVs
OIJi1,oo.·'!,00t0J',OIU2,OJOlo..OOO'l'I,OU'!.DI+-U.
OI~U.OI#l,IlIMl}
IO(loli,10ll:>\,IOOI1,lao;l.lflO'U.10*.l.101IilliOOIll,
JOI~
100I>0.IMI2.JO;O!.IOOJO,IOH>.IOI51.10IIn.II~J.
II~JS
, ......
~' ...
Setup Codes for PVRs
t\{)o.,J''''''p,n,,,
01 '17. OO'~!. 00"",, OOt>J~. OIAJ~. 01 Ii!. lIOH;, OOH~,
or.,.,. OO~! l. m~19. 01 ~<to.Ollr; ... OIIM.I'J{lO'lq. 0111'19.
UIJ'!.OI~I"OI++!.OI~U.OIHlOlfl/l'l1.lIJMl.I
OI50j.Olno>.OO7i5,Oll'O,OI"S
1150<'OI005.00ns.OIT:'''
OII~1.'II;I'.'1l;"".IJOJ7s.QOn"'_I'.'"r. .. 0II;.!..!,
_.Ol-W!
A n<.-HVo
,' ....
Ap".I)i~,'.1
A.w,n ..
C,o;lrf
101110
JOllOl'l.IOllllO
IO·1:;I,IOI!l(),WO'nI0t>1.l,IO!l()l.I(lAl';,II •. 17,119;1.
II,SI
IQo:)Ii.1017&.IOO.Ill.100't2
'00'
'00"
10l:>l, IllOOO.I00I51.100IIIJ,IOI80.1000Q,IOOlO, 10111.
1_!,1l1!£.1l~1Il
IOOS4"loooo.IOI!JlJ.11lOJO, 10171. 10187
10000.l,IOJlIO,Ukon
10Cl47.IDO>f"IOIS4,IOOOD,I0D5I.ID451.1_.I,IOI80.
1-.1171l2.IOI7S,100J(I,IOI4,\ler-.10lI1&.'_
JJU~.IIW.II91'
I04SI.I017&.100'I2.IJ.... l.IOO!J.10001.1l ... n,117S;,
117';o,1I~2A
1004i.10IH.I0451.1D.lll>,10*.l,IOJIIO,IOISO.IOIl8,
1Q171.119U,11929,11918,lotiH.lnl~.IOIIl5.10In,
10lH
IIJIHO.IOIII'
1000J.I()340
10A11. 10171. II'I-l~
IOOS4.IOIS4.loooo.IO.S~
'"''
JI"'7.J(ll)47.HlOOll.10lIS1.I04S1.1000Q,1017A,IOOJG.
101);' 11lO';';, IIll&!, 11117.11J.!7.10011l, 11917,ll':ll'.
11'!2
10017.10000.100-'&
, ....

fl~
Ij
111£
11
Ij
I~
Illi
I~ I~
Ij
IJ
Ig
121J
1111
E
~
"11"11"11'
~
i
~
i
~
i
~
~I!
I~
I~ I~
0-
:5 :$
~
ill!lil·II·ltl~
~
§l
;,,,
..
,
..
.,
j,I·I"
I· I·
r r
,.
7 ,
~
'7'
,,-;
1-
1
w
~
I!
~
I~
I~
~
I,
I~
I~
I~
I,
I~
I~
11
I~
I!
I!
I~
j
II
III;
I,
I,
r.llllll!
1111
II
Ill!
Ii
~
I~ I~
'Ii
Jill!
J
IJ
I!
Ij
Ii
Ii
§
I~ I~
I~I~
I'
I~I~I~
I~ I~ I~
I§
I§I~
I!I§
I~
I~
I~
I~I~I~
I
~
I~
I!
I~I~
I~
11
I~
11!1Ill!
I£I~
1£
~.
,.
1<',
"'
~,
"
li",
~,
.......
~, ~,
....
,
_, _,
_.
~
_,
_,
...
_,...
_
'"
!
I~
II
Ii
Illi
II
I~
I~ I~
11
1.lllfl!
Iflj
I~
Irlll;
I~ I~
Ii
~
I~
If
I!
Illi
1111lJ
Ii
I~
lilJ
Ii
Ii
~
~
I~ I~
I~
I~
I~
I~ I~ I~ I~ I~
I~
I~
I~
III~
I~ I~ I~
I~
I~ I~
I~
I~
I~
Ii
I.If
I
=
~';;
~.;::
Ii
l!j
II
I!
It
Ii
II
IJ
Ii
It
11
I~
lil~lj
11 11
Ii
I~
lilj
I~
Iflj
Ii
1~lj
~
I~ I~
I~ I~
I~
I
I
~
II~
II~
III
Ii
II
Ii
1"11"
~!i
t~
i
~
~I~
Gj~j
~
ii~i~~~~~~~~
iii
~ ~
~
~~~~
~
,
III"
I
,~
i
~
Q
g~G~i
~~
"Ii
I::
I.
2 •
~
,
Ii
".
;g
I'
~~§2=S~§§
§§
~~
§Ii
~
::
~
Ig
I
~
Ii
~
I,
I~
~
II~
I~
Irq
II'
Ii
Ig
':~f~"'~;~;f~ :i~~~~~~S:~§§:
~I~II~I~
II~I~
n
~
un
~~
:
~~~~
~
~
I~
11~
H
~ ~
!I~
I~
~
Ig
~II
n
~
~
m
~
I~
I,
I~
I~
I~
I~
I!
I~
Ii
]
IJ
I~ I~
I~
I~
Ij
11
~
Ill,
Ij
ItIII,1111.lll"I!IJ
Is
I]
I~
I!
Ii
11
I,
I~
1=
!I}I,
;1'
1"1'11-'1-1
1
1'11'
H
£HHHdl~
!
I'l'
1'1·11'1
III
1:11
I-I
I1I1
I'
e..1 ij< fI
C:.3
-
E;;
f
~
..
~
~~i
~~~~;~~~1}j);;~!f
1
'111'
lt
~
':
~
~
c c
~ ~
]
IJ
1<
Ij
~ Ifl~
Ii
I)
~
Ill.
II
I!
Illll'
Ii
Ill'
I~
11
1<
~
....
;:
0:
0:::
....
.:!:
1:
l.
~ ~
'"
..
,;i
j
mlililtlf
j
IW
mlll;li
,
1111111
c
J
Ih
Hddl'I'
,
-"".r
f".r;.)
7

"'''fO·''
Controlled by the VCR
Setup Codes for MCR/OVO CombInatIon
Controlled by the DVD
Controlled by the IV
, ..
\1~1"''''
Controlled by the VCR
Setup Codes for vCRs
"""
".IoII.!OOlo.'!Oll)~.!lJO.47.~I~.!O.'ll') • .1QO.· ••
!l.lI>.!.~;~
'U"-';."~~').ZI1l'~.11'.1Q7.2l\.17~
'1~1~1.'I~~,I •.:ItI'Il>,!OliS
!'~""!. !"I.l~. l<1!b!. It, ~I, !'~.~l, ,'11»1, ,1I!71\,
!I"'!,!II; .. ll.!llI'·'
Ito~'.rd(·"mp"""
.... ,
¥ .. ,,-.
11llW.!OO.l.".~.19!«I,!OOUO,20t ..... !O.!O!.
2Oiloll,:!OIUJ.!IOM!100t
20!.w.roUl.10S!,,!Ot>l~
2003S,100J7,2003~,lOOOO,1017&,!OOJII,1IH7
200'i,2tml,20000,lOO12.10l71\,200211.100l>!
200lS• .1OOl;.1OlI-l5 • .-'<.W.!l~U!.!OO-l1.11Jlll'J.
10105.110l7
10aJ;"!ODl,.~.rooJ'l.lOOIIl.~Z-loll,!oooo.
1014'l.10So>.I,.ro;9.1,!tII>11I,1IS~1,1I7AI
.!OOl;"!<Ilbl• .-'<IOJ, •.-'<IlWl.!OOl'.ll»I7.10HIl.
lOOOQ,.1Q'Q-!,lll.-'<l'l • .-'<I01~.lIl!7"lllOC,!lIII4,.
.1QjIr,.!047'.1IOJ7.?11~.!IB7.!11~
ll.'.lMl.1<JO.l1I,10047.10000.11»l1,100b7.Z0l>l3,
11lll41.11l(k)1.Z(I,O,(I7
110lJ':.':IIll.I:;'!OI6!.lOOl7.10l14Il,lOOli.!/l!¥I,
10l......
lllllJ-.l.1OOll!.!().lJl.:!(IS~.\!IIMA.!II~!.111b1
1lllllol.lll!¥I,!OOOQ,lOI1I4.10111• .1Q!I)'i,?OOO.'. •
.-'<I!71..1QlO&,llU7'.11179
!1lO.n.1001l1.1OOOO.l0.-'<l'J.2006N
100lS.:!III~l.1004X.100ll1.2DO-lS,10000.lll!0'I.
10061.11)(,16.201J11I.2071~.2IMI,111~1
100".1<)1.1.100J7.100.11, lOO~7.l0!-W<loooo.
1010~.100,H •. 100l>1.111l.",211"1
"""',.
.........
"I'lv ••,.
Wh"'"''''''~th ......
World
Setup Codes for Video Accessories
. ...
[:p,,,"
It ....ltnr... ~.nl
Hoooc.rd~'<n
'"
,~,
S.m·""B
'"'"
.....
.....
,.,.--
lTGroup
CARE
800-321-2343
:!OOIlQ,.!OOJS,.-'<lOJl.lIJO.IS,lOOOO,20I<l'l.:(ll)l6,l(W79
:00';.202«1,]0071
!OOJ:;'~7.:OOl!.:OOls'lOOOO.lOOlo7.-'
.-'<lb.\tl,!IIll!.ll!l!.!I"!
1lU ...... MlUS.lOOOO.!lJl)(!.1OlI-l1,!O.'O'• .1QI').lI •
.1Ql)6.!.ZOM;.!I-.21Io&;,ll'fl1,!1"",,
10n00.ZOOlj.,100)1.!l104&!OlNl.2008I.!ODll.
2OJ ...... _j.,:!OOOO,lOOC,!004.\lOlHl • .-'<I01l,
!OOJA,.1QI,",~lOO6!.104;,.lt711O
lOO)7.Z00J~.100}.\10000.101(l').1004j.!O!;1I,
ll\.li't.!lll9,!l~:;9
"...
"'"
OU71
011:72
oU7l.IlU,H.IlIJM
01271
OOIU
OU12.lll)29
Oll2b
!1lO';.!III>'l.!O,~,,':UO\lOl.!OIZI'!"'I.\lO!II'I.
.:1JOO1.10.r.i\::o::oZ.!n!u.'!i'lllbI.! .... 7~.!0; .. I.
.:o:;~.I,!I!;i\!ll;~.!I;H
!OOJ9.!IJIl.I •• !OIIUD.!'Jlo.l.._
""
-.:iI,.", ...
2001>0,1OUl5.!O(\.l&,10Z,w..-'<IO-I$.lOOOO,!O(\.ll.
11lU9.101IlSdOI~.!Olll! •.!(I700,:!(IM7.2OMl.
110H.1.0II0
ZOOJS,.1QI .....!OlI17.!OIl-lII.lOl\.I7.2Ol-lO,lOOOll,
.1Qlk.1Ql!l.2O!7lI,!OlloM>,lOOlo.!.111~
11ll-lO,lOOOll.l00b7.101..,...lOOII.lOO71• .1QO(Il,
10271.10-179.11.79
lOO~7.lIlHll,lOOOO.I<l11l4.1004l>,201~9.1047q
lOOl>O,lOOJ;.!Olbl.lOOJ7.!004.100J'l.200-l7.
lOOJl,.!OIll5• .-'<lOI.IO,1OII4.!.2010-I.!0067.!OO-I.\
Z01O'J.ZOO-II • .-'<I011.ZOlJ4oO.ZOIOS.2IlJ7
~ZOO-I7.ZOOJ!,lOOOll,~ • .!OIJO;,.-'<lM3