OpenVox DAHDI D110P User manual

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
1
OpenVox Communication Co.Ltd
OpenVox-Best Cost Effective Asterisk Cards
Address: F/3, Building No.127, Jindi Industrial Zone,
Shazui Road, Futian District, Shenzhen, Guangdong 518048, China
Tel:+86-755-82535461, 82535095, 82535362, Fax:+86-755-83823074
Business Contact: sales@openvox.com.cn
Technical Support: support@openvox.com.cn
Business Hours: 09:00-18:00(GMT+8) from Monday to Friday
URL: www.openvox.cn
Thank You for Choosing OpenVox Products!
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
2
Copyright
Copyright© 2011 OpenVox Inc. All rights reserved. No part of this document maybe
reproduced without prior written permission.
Confidentiality
Information contained herein is of a highly sensitive nature and is confidential and
proprietary to OpenVox Inc. No part may be distributed, reproduced or disclosed
orally or in written formto any party other than the direct recipients without the
express written consentof OpenVox Inc.
Disclaimer
OpenVox Inc. reserves the right to modify the design, characteristics,andproducts at
any time without notification or obligation and shall not be held liable for any error or
damage of any kind resulting from the useof this document.
OpenVox has made every effort to ensure that the information contained in this
document is accurate and complete; however, the contents of this documentare
subject to revision without notice. Please contact OpenVox to ensure you have the
latest version of this document.
Trademarks
All other trademarks mentioned in this document are the property of their respective
owners.
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
3
Contents
General Safety Instructions ........................................................................................4
Test Environments.......................................................................................................5
Chapter 1 Overview.....................................................................................................6
1.1 What is Asterisk ................................................................................................6
1.2 What is D110P/D110E......................................................................................7
Chapter 2 Hardware Setup.........................................................................................8
2.1 Span type setup .................................................................................................8
2.2 Slot compatibility..............................................................................................8
2.3Timing cable.......................................................................................................9
Chapter 3 Software Installation and Configuration...............................................10
3.1 Download........................................................................................................10
3.2 Installation.......................................................................................................11
3.3 Configuration..................................................................................................15
Chapter 4 Reference ..................................................................................................21
Appendix A Specifications ........................................................................................22
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
4
General Safety Instructions
CAUTION
1. The computers that have D110P/D110E card installed must comply
with the country’s specific safety regulations.
2. Only service personnel should go to install D110P/D110E card.
3. Before installing D110P/D110E card, please unplug the power cord
and remove the cover from your PC.
4. For avoiding personal injuries and damages to your machine and
D110P/D110E card, make sure bracket of the card is secured to the
PC ’s chassis ground by fastening the card with a screw.
5. Electrical Surges, ESD are very destructive to the equipment. To
avoid it, make sure there is a low impedance discharge path from
your computer to chassis ground.
6. To reduce the risk of damage or injury, please follow all steps or
procedures as instructed.
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
6
Chapter 1 Overview
1.1 What is Asterisk
The Definition ofAsterisk is described as follows:
Asterisk is a complete PBX in software. It runs on Linux, BSD, Windows
(emulated) and provides all ofthe features you would expect from a PBX
and more.Asterisk does voice over IP in four protocols,andcan
interoperate with almost all standard-basedtelephony equipment using
relatively cost-effective hardware. Asterisk provides Voicemail services
with Directory, Call Conferencing, Interactive Voice Response, Call
Queuing. It supports forthree-way calling, caller ID services, ADSI, IAX,
SIP, H323 (as both client and gateway), MGCP (call manager only) and
SCCP/Skinny (voip-info.org).
PC+Softphone
SIP phone
Analog phone
Switch Asterisk
VOIP PBX
Operating System Linux and FreeBSD
OpenSource Drivers Asterisk®,DAHDI,
Zaptel,Bristuff,Misdn and ISDN4BSD
Protocol SIP, IAX, SS7, MGCP, H323, R2 and more..
Applications IVR, CRM, FAX, E-mail, CallCenter, Billing
and your application..
Figure 1 Topology
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
7
1.2 What is D110P/D110E
The D110P/D110E supports E1, T1 and J1 environments. It is selectable
on a per-card or per-portbasis. This feature enables signaling translation
between E1 and T1 equipments and allows inexpensive T1 channel banks
to connect with E1 circuits.
D110P/D110E supports industry standard telephony and data protocols,
including Primary Rate ISDN (bothN. American and Standard Euro)
protocolfamilies for voice, PPP,Cisco, HDLC, and Frame Relay data
modes.Both line-side and trunk-side interfaces are supported.
D110P/D110E works well with Asterisk®, Elastix®, FreeSWITCH™,
PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as
other OpenSourceand proprietary PBX, Switch, IVR, and VoIPgateway
applications.
TargetApplications
Voice-over Internet Protocol(VoIP) Services
Complex IVR Trees
"Meet-Me" Bridge Conferencing
VoIPGateways (supportSIP,H.323, and IAX)
Legacy PBX/IVR Services
Voice/Data Router (replace expensive routers)
PRI/Switch Compatibility - Network orCPE
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
8
Chapter 2 Hardware Setup
There are some points that should be paid attention to when setting up
D110P/D110E.
2.1 Span type setup
The jumper P5 on the middle of right side controls the function of each
span at E1 or T1 mode. Setting P5to close means SPAN1 will work at E1
mode. Setting P5 to open means SPAN1 will be T1.
2.2 Slot compatibility
D110P is compatible with 32-bit 5.0V PCI slot, 64-bit 3.3V PCI slot or
64-bit 5.0V PCI slot, but D110E is compatible with PCI-E ×1, ×2, ×4, ×8,
or ×16 slot. You should confirm your slot type and insert D110P into a
PCI slot or put D110E into a PCI-E slot as previously described.
64-bit 5.0V PCI slot
64-bit 3.3V PCI slot
32-bit 5.0V PCI slot
PCI-E ×1 slot
1
2
3
4
Figure 2 PCI-E and PCI slot
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
9
2.3Timing cable
If you have just one card in the system, all channels on that card have
already run under the same clock source, sotiming cable is unnecessary.
But if there are more than one card,using timing cable has some
advantages. Before using the clock line, each card works on its own
clock, therefore precision of the clockis limited; each cardwill send
/receive voice data at different speeds.Invoice usage, this small issue can
be omitted, but in data communication such as Fax/Modem, it will cause
big problems.Data loss will cause communication broken or fax broken.
Timing cable will forceall cards to work at the same clock source,send
data at the same speed,as a result no data will lost.
If you found J914 (input) and J915 (output) interfaces on the card, it
means the card supports clockline, for details, please refer to HERE.
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
10
Chapter 3 Software Installation and Configuration
D110P/D110E supports DAHDI software driver on Linux. To make full
use of D110P/D110E, you should download, compile, install and
configure Libpri, DAHDI and Asterisk.
3.1 Download
DAHDI software packages are available on OpenVoxofficial website or
Digium. Some patches should be added while the driver source is from
Digium, therefore, it is recommended that downloading the DAHDI
driver package from OpenVox official website.
Gain DAHDI source package from OpenVox:
http://downloads.openvox.cn/pub/drivers/dahdi-linux-complete/openvox_
dahdi-linux-complete-current.tar.gz
Get Asterisk software package from digium official website:
http://downloads.asterisk.org/pub/telephony/asterisk/releases/asterisk-1.8
.5.0.tar.gz
Get Libpri software package from digium official website:
http://downloads.asterisk.org/pub/telephony/libpri/releases/libpri-1.4.11.
5.tar.gz
Execute the following commands under the directory of/usr/src/ in
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
11
generally, the former three below are used for downloading these three
packages and the later three are for unzipping them.
#_wget_http://downloads.openvox.cn/pub/drivers/da
hdi-linux-complete/openvox_dahdi-linux-complete-c
urrent.tar.gz
#_wget_http://downloads.asterisk.org/pub/telephon
y/asterisk/releases/asterisk-1.8.5.0.tar.gz
#_wget_http://downloads.asterisk.org/pub/telephon
y/libpri/releases/libpri-1.4.11.5.tar.gztibpri-1.
4.12.tar.gz
#_tar_-xvzf_openvox_dahdi-linux-complete-current.
tar.gz
# tar –xvzf asterisk-1.8.5.0.tar.gz
# tar –xzvf libpri-1.4.11.5tar.gz
3.2 Installation
1. Hardware detection
# lspci –vvvv
Check the outcome and confirm your system has recognized
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
12
D110P/D110E. If it has been recognized, "communication controller"
will be displayed in the output information like that:
01:02.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
Subsystem: Unknown device 79de:0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 225
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at dcdff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0+,D1-
,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Figure 3 Hardware detection
If D110P/D110E is not recognized by the system, you have to power off
and take out the card, then try to insert it into other PCI or PCI-E slot.
2. Software installation
Some dependencies are crucial. If any of them is absent, the software
installation process would not go through successfully. Let’s run "yum
install XX"(XX stands for the dependency’s name) to check the
availability of dependencies.
# yum install bison
# yum install bison-devel
# yum install ncurses
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
13
# yum install ncurses-devel
# yum install zlib
# yum install zlib-devel
# yum install openssl
# yum install openssl-devel
# yum install gnutls-devel
# yum install gcc
# yum install gcc-c++
# yum install libxml2
# yum install libxml2-devel
If there is no kernel-devel sourcein the system, users
should run the following command to install the
kernel-devel to peer current kernel:
# yum install kernel-devel-`uname –r`
While if there is no matched kernel-devel found, youshould download
matched RPMpackage to install it, or execute the following command to
update to the latest and stable kernel version:
# yum install kernel kernel-devel
After installed, please rebootyour machine to apply the new kernel and
install the dependencies. If the dependency has been installed, system
indicates that nothing to do which means youcould go to next one
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
14
directly. Otherwise, the systemwill keep oninstalling it.
Among Libpri, DAHDI and Asterisk, let’s install libpri firstly. Please
execute those commands under the directory of /usr/src/ in generally:
# cd libpri-XX
# make
# make install
Change to the directory of dahdi-linux-complete-XX (XX represents
DAHDI version), then perform commands one by one to install DAHDI.
# cd /usr/src/dahdi-linux-complete-XX
# make
# make install
# make config
Caution: If there is something wrong after "make",
please refer to HERE. In the url link, the moderator
introduces you a method how to patch. After patching,
save your changes and exit. Then run "make"again, if successfully done,
it is time for you to install Asterisk.
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
15
Please operate thosecommands to install Asterisk.
# cd asterisk-XX
# ./configure
# make
# make install
# make samples
"make samples" will generate the standard
sample configuration file in the directory /etc/asterisk. As a
freshman, you should perform "make samples", that is to
say, it is unnecessary to perform "make samples"every time. Because
once performed, it will cover the old sample configuration files you have
installed.
3.3 Configuration
1. Driverloading
After compiling and installing DAHDI and Asterisk, please load the
driver by running:
# modprobe dahdi
# modprobe wcte11xp
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
16
# dahdi_genconf
If there is any error, please trace the cause. Until all errors are clear up,
you could execute "dahdi_genconf"again, and then go to the next step.
By running "dahdi_genconf", it will generate /etc/dahdi/system.conf and
etc/asterisk/dahdi-channels.conf automatically. Checking whether the
generated files information agrees with your hardware setup, if not, you
should modify to your specific requirements. Do not forget to confirm
dahdi-channels.conf is included in chan_dahdi.conf,if not, run command:
# echo "#include dahdi-channels.conf" >>
/etc/asterisk/chan_dahdi.conf
A part of system.confwhich is one of the basic channel configuration
files is displayed.
# Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER)
span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
# Global data
loadzone = us
defaultzone = us
Figure 4 A part of system.conf
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
17
2. Country mode modification
In order to match your country pattern, you need to change parameters
loadzone and defaultzone to your country. Forexample, your system is in
CHINA, you would like them change to:
loadzone = cn
defaultzone = cn
Some zonedata is available in the file
.. /dahdi-XX/tools/zonedata.c, you can refer to it to match
your country mode. Meanwhile, youalso need to modify
another parameter which is in file
/etc/asterisk/indications.conf.
country=cn
Apart offile /etc/asterisk/dahdi-channels.conf is showedas below.
(Modification, if it is not agree with the hardware setup)
; Span 1: WCT1/0 "Digium Wildcard TE110P
T1/E1 Card 0" (MASTER)
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
context = default
group = 63
Figure 5 A part of dahdi-channels.conf
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
18
After modifying the country mode, please execute the following
command:
# dahdi_cfg –vvvvvv
The command is used for reading and loading parameters in the
configuration file system.confand writing to the hardware. A part of
outputs are showed in the following figure.
[root@localhost ~]# dahdi_cfg -v
DAHDI Tools Version - 2.4.0
DAHDI Version: 2.4.0
Echo Canceller(s): MG2
Configuration
======================
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
31 channels to configure.
Setting echocan for channel 1 to mg2
Setting echocan for channel 2 to mg2
Setting echocan for channel 3 to mg2
Setting echocan for channel 4 to mg2
Setting echocan for channel 5 to mg2
Setting echocan for channel 6 to mg2
Setting echocan for channel 7 to mg2
Setting echocan for channel 8 to mg2
Setting echocan for channel 9 to mg2
Setting echocan for channel 10 to mg2
……
……
Setting echocan for channel 27 to mg2
Setting echocan for channel 28 to mg2
Setting echocan for channel 29 to mg2
Setting echocan for channel 30 to mg2
Setting echocan for channel 31 to mg2
Figure 6 Channel map
http://ArtTel.ru

D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
19
3. Asteriskinitiation
# asterisk –vvvvvvvgc
If Asterisk is already activate, run "asterisk –r"instead. In the CLI,
please run the following command:
localhost*CLI> dahdi show channels
1 from-pstn Default In Service
2 from-pstn default In Service
3 from-pstn default In Service
4 from-pstn default In Service
5 from-pstn default In Service
6 from-pstn default In Service
7 from-pstn default In Service
8 from-pstn default In Service
9 from-pstn default In Service
10 from-pstn default In Service
11 from-pstn default In Service
12 from-pstn default In Service
13 from-pstn default In Service
14 from-pstn default In Service
15 from-pstn default In Service
17 from-pstn default In Service
18 from-pstn default In Service
19 from-pstn default In Service
20 from-pstn default In Service
21 from-pstn default In Service
22 from-pstn default In Service
23 from-pstn default In Service
24 from-pstn default In Service
25 from-pstn default In Service
26 from-pstn default In Service
27 from-pstn default In Service
28 from-pstn default In Service
29 from-pstn default In Service
30 from-pstn default In Service
31 from-pstn default In Service
Figure 7 channels show
If DAHDI channels are found, it means they have been loaded into
Asterisk successfully. You are going to edit dialplan by your
http://ArtTel.ru
This manual suits for next models
1
Table of contents
Other OpenVox PCI Card manuals

OpenVox
OpenVox B100E on DAHDI User manual

OpenVox
OpenVox A1200P User manual

OpenVox
OpenVox D430 User manual

OpenVox
OpenVox A800P User manual

OpenVox
OpenVox B400P User manual

OpenVox
OpenVox B200P User manual

OpenVox
OpenVox AE810P User manual

OpenVox
OpenVox B400P User manual

OpenVox
OpenVox D230P User manual

OpenVox
OpenVox G400P User manual