OpenVox G400E User manual

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
1
OpenVox Communication Co.Ltd
OpenVox-Best Cost Effective Asterisk Cards
Address: F/3, Building No.127, Jindi Industrial Zone,
Shazui Road, Futian District, Shenzhen, Guangdong 518048, China
Tel:+86-755-82535461, 82535095, 82535362, Fax:+86-755-83823074
Business Contact: sales@openvox.com.cn
Technical Support: support@openvox.com.cn
Business Hours: 09:00-18:00(GMT+8) from Monday to Friday
URL: www.openvox.cn
Thank You for Choosing OpenVox Products!
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
2
Copyright
Copyright© 2011 OpenVox Inc. All rights reserved. No part of this document maybe
reproduced without prior written permission.
Confidentiality
Information contained herein is of a highly sensitive nature and is confidential and
proprietary to OpenVox Inc. No part may be distributed, reproduced or disclosed
orally or in written form to any party other than the direct recipients without the
express written consentof OpenVox Inc.
Disclaimer
OpenVox Inc. reserves the right to modify the design, characteristics,andproducts at
any time without notification or obligation and shall not be held liable for any error or
damage of any kind resulting from the useof this document.
OpenVox has made every effort to ensure that the information contained in this
document is accurate and complete; however, the contents of this documentare
subject to revision without notice. Contact OpenVox to ensure you have the latest
revision of this document.
Trademarks
All other trademarks mentioned in this document are the property of their respective
owners.
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
3
Contents
General Safety Instructions ........................................................................................4
Test Environments.......................................................................................................5
Chapter 1 Overview.....................................................................................................6
1.1 What is Asterisk ................................................................................................6
1.2 What is G400E..................................................................................................7
Chapter 2 Hardware Setup.......................................................................................10
2.1 Power supply...................................................................................................10
2.2 Slot compatibility............................................................................................11
2.3 Indication LEDs ..............................................................................................11
2.4GSM modules and SIM cards..........................................................................12
2.5 Introduction of main chipset ...........................................................................12
2.6 Hardware setup procedure ..............................................................................13
Chapter 3 Software Installation and Configuration...............................................14
3.1 Hardware detection.........................................................................................14
3.2 Dependencies installation ...............................................................................14
3.3 chan_extra, DAHDI and Asterisk installation ................................................17
3.4 Driver loading and Asterisk initiation.............................................................23
3.5 Dialplan edit....................................................................................................24
Chapter 4 References.................................................................................................26
Appendix A Specifications ........................................................................................27
Appendix B 2G and 3G Modules..............................................................................28
Appendix C GSM frequency band reference ..........................................................30
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
4
General Safety Instructions
CAUTION
1. The computers that have G400E card installed must comply with
the country’s specific safety regulations.
2. Only service personnel should install G400E card.
3. Before you install G400E card, please unplug the power cord from
the computer and remove the cover from your PC.
4. For avoiding personal injuries and damage to your computer and
G400E card, make sure bracket of the card is secured to the PC ’s
chassis ground by fastening the card with screws.
5. Electrical Surges, ESD are very destructive to the equipment. To avoid
it, make sure there is a low impedance discharge path from your
computer to chassis ground.
6. To reduce the risk of damage or injury, please follow all steps or
procedures as instructed.
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
6
Chapter 1 Overview
1.1 What is Asterisk
The Definition ofAsterisk is described as follows:
Asterisk is a complete PBX in software. It runs on Linux, BSD, Windows
(emulated) and provides all of the features you would expect from a PBX
and more.Asterisk does voice over IP in four protocols,and can
interoperate with almost all standards-based telephony equipment using
relatively inexpensive hardware. Asterisk provides Voicemail services
with Directory, Call Conferencing, Interactive Voice Response,Call
Queuing. It supports three-way calling, caller ID services, ADSI, IAX,
SIP, H323 (as both client and gateway), MGCP (call manager only) and
SCCP/Skinny (voip-info.org).
PC+Softphone
SIP phone
Analog phone
Switch Asterisk
VOIP PBX
Operating System Linux and FreeBSD
OpenSource Drivers Asterisk®,DAHDI,
Zaptel,Bristuff,Misdn and ISDN4BSD
Protocol SIP, IAX, SS7, MGCP, H323, R2 and more..
Applications IVR, CRM, FAX, E-mail, CallCenter, Billing
and your application..
Figure 1 Topology
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
7
1.2 What is G400E
G400E is a 4-channel (slots) PCI-E GSMcard and works in the GSM
network. One GSMmodule supports one SIM card.The 3rd generation
module basedon chan_extra driver for OpenVoxGSM cards support
3G(WCDMA). With the new module, users easily get the best stability in
voice and SMS function
G400E allows users to choosethe amount of modules and SIM cards
according to their specific requirements. G400E can be implemented in
Asterisk PBX and GSMnetwork. Through this implementation, users
will realize to make an asterisk PBX with flexibility and mobility
perfectly.
Targetapplications
GSMconnectivity for PBX
Mobile PBX
GSMVOIPGateway
SMS Gateway
GSMCallback service
Sample application
As the following figure conveys, SIPphone and soft phone are able to
communicate with mobile phones via G400E which acts as a GSM
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
8
connection for PBX.
PC+Softphone
SIP Phone
Mobile Phone
Asterisk VOIP PBX
G400E
Switch
Figure 2 Sample application
Key benefits
IMEI and PIN modification
SMS batch receiving/sending, AT command availability
SupportUSSD
Scalable: Extending the system by adding more modules
Easy to use: It bases on chan_extra open sourcesolution
Configurable: Setting GSMnetwork requirements through
configuration files
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
9
High quality with low price
Low power consumption
Application: Use Asterisk®to build your IP-PBX/Voicemail system
RoHScompliant
Certificates: CE, FCC
Features
Owns an electrical circuit switch to ensure the GSMmodules are
power-off when the system reboots
Be compatible with Industry Standard: PCI-E ×1, ×2, ×4, ×8, ×16
Quad-Band GSM/GPRS 850/ 900/1800/1900 MHz
Supports LEDs indicating network status
DIGITALaudio quality(echo cancel)
1 SIM card per GSM channel
Supports external antenna
GSMdata connections
DTMF detection
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
10
Chapter 2 Hardware Setup
There are some points should be paid attention to setup G400E.
2.1 Powersupply
Please take particular attention to power supply connection. There are
two alternatives allow users to select a power supply.
1. Using 12V external DC, you should adjust the jumper J3 to 1;
2. Using Molex connectorby setting the jumper J3 to 2 as figure 3.
SIM card
Figure 3 Power supply method
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
11
2.2 Slot compatibility
G400E is compatible with PCI-E ×1 slot (slot 1) and ×2, ×4, ×8, ×16,
while it is not fit for PCIslot (slot2, slot3, slot 4). You should confirm
your slot type, and then insert G400E into a PCI-Eslot. PCIand PCI-E
slot are showed as following:
64-bit 5.0V PCI slot
64-bit 3.3V PCI slot
32-bit 5.0V PCI slot
PCI-E ×1slot
1
2
3
4
Figure 4 slots
2.3 Indication LEDs
There are 4 LEDs on the board.Each one indicates the working status of
each SIM card.The details explainations are as followings:
LED off: SIM card does not work
64ms On/800ms: SIM card does not find the network(64ms
On/800ms means the LED is light on 64ms then go out 800ms)
64ms On/3000ms:SIM card finds the network
64ms On/300ms: GPRScommunication
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
12
In addition, there are two LEDs located at the bottomof the boardwhich
are D8 and D9, under normal circumstances, they are lit when powered
and D9 flashes more quickly than D8.
2.4 GSM modules and SIM cards
G400E supports2Gand 3G module, detail information about 3G modules
please go to here. One GSMmodule supports one SIM card and one
antenna, please plug a SIMcard into the back of a GSMmodule and
activate it. For more details, please refer to figure 3.
2.5 Introduction of main chipset
Designed for global market, M20 is quad-band GSM/GPRSengine that
works on frequencies, GSM/GPRS 850/900/1800/1900 MHz.
With a tiny configuration of 35mm ×32.5mm ×2.95 mm, M20 can fit
almost all the spacerequirement in yourapplication, such as smart phone,
PDAphone, Car Phone,Wireless PSTN,and other mobile devices.
The M20 provides RF antenna interface. Customer’s antenna should be
located in the customer’s main board and connect to module’s antenna
pad through micro strip line or other type RF traces whose impendence
must be controlled in 50Ω.
The M20 is integrated with the TCP/IPprotocol,ExtendedTCP/IPAT
commands are developed for customers to use the TCP/IP protocoleasily,
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
13
which is useful for those data transfer applications.
2.6 Hardware setup procedure
Power off your PC,remember unplug the AC power cable
Place SIM cards for GSM modules
Insert G400E into a PCI-E slot
Select a power supply way as previously stated
Fix the board by a screw
Power on your PC
PCI-E slot
Power connection
Figure 5 Hardware setup
Caution:During the above processes,an ESD wrist
strap is needed. Once power is on, you must not attempt
to install or take down the board.After hardware setup,
it is time to install software.
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
14
Chapter 3 Software Installation and Configuration
3.1 Hardware detection
Detect hardware by executing command:
# lspci –vvvv
Check the outcome and confirm your system has recognized G400E. If it
has been recognized, the output information will be showed like that:
01:04.0 Class ff00: Unknown device 1b74:0100 (rev 01)
Subsystem: Unknown device 1b74:0104
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 66
Region 0: Memory at dedf0000 (32-bit, non-prefetchable)
[size=64K]
Figure 6 Hardware detection
If G400E is not recognized by the system, you have to power off and take
out of the card, then try to insert it into another PCI-E slot.
3.2 Dependencies installation
Some dependencies are crucial, if any of them is absent, the software
installation process would not go through successfully. Let’s run "yum
install XX"(XX stands for the dependency’s name) to check the
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
15
availability of some dependencies.
# yum install bison
# yum install bison-devel
# yum install ncurses
# yum install ncurses-devel
# yum install zlib
# yum install zlib-devel
# yum install openssl
# yum install openssl-devel
# yum install gnutls-devel
# yum install gcc
# yum install gcc-c++
# yum install libxml2
# yum install libxml2-devel
If there is no kernel-devel sourcein the system, users
should run the following command to install the
kernel-devel to peer current kernel:
# yum install kernel-devel-`uname –r`
While if there is no matched kernel-devel found, you should download
matched RPMpackage to install it, or execute the following command to
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
16
updateto the latest and stable kernel version:
# yum install kernel kernel-devel
After installed, please rebootyour machine to apply the new kernel and
install the dependencies. If the dependency has been installed, system
indicates that nothing to do which means youcould go to next one
directly. Otherwise, the systemwill keep oninstalling it.
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
17
3.3 chan_extra, DAHDI and Asterisk installation
Go to OpenVox official website to download chan_extra, the url link is:
http://www.chan-extra.org/download/releases/
Download chan_extra to the directory /usr/src/ in generally, and then
unzip it.
#_wget_http://www.chan-extra.org/download/release
s/chan_extra-1.XX.tar.gz
# tar –xvzf chan_extra-1.XX.tar.gz
Change to the directory chan_extra-1.XX(XX stands for chan_extra
version), then perform the specific command to install it.
# cd /usr/src/chan_extra-1.XX
# ./install.sh
After running the above commands, the script will checkwether the
dependencies have been installed, if not, you should type "y" to accept to
install all the necessarydependencies until the system detects all of them
are "OK", then press "enter"key to operate the next step.
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
18
########################################################################
# OpenVox Extra Installation Script #
# v1.1.2 #
# OpenVox Communication Co.,Ltd #
# Copyright (c) 2009-2011 OpenVox. All Rights Reserved. #
########################################################################
Checking for C development tools ... [ OK ]
Checking for C++ developement tools ... [ OK ]
Checking for Make utility ... [ OK ]
Checking for ncurses library ... [ OK ]
Checking for ncurses-devel library ... [ OK ]
Checking for Perl developement tools ... [ OK ]
Checking for Patch ... [ OK ]
Checking for bison... [ OK ]
Checking for bison-devel... [ OK ]
Checking for openssl... [ OK ]
Checking for openssl-devel... [ OK ]
Checking for gnutls-devel... [ OK ]
Checking for zlib... [ OK ]
Checking for zlib-devel... [ OK ]
Checking for kernel development packages... [ OK ]
Checking for libxml2-devel... [ OK ]
Press [Enter] to continue...
Figure 7 Depedencies detection
G400E software installation is indicated by some wizard options, you
should select the right option by your specific case. Now let’s introduce
how to install the driver by source code.
########################################################################
# OpenVox Extra Installation Script #
# v1.1.2 #
# OpenVox Communication Co.,Ltd #
# Copyright (c) 2009-2011 OpenVox. All Rights Reserved. #
########################################################################
1) Source code install
2) Trixbox-dahdi install
3) Elastix-dahdi install
q) quit
Please enter your selection (1..3 or q) ->
Figure 8 Installation ways selection
http://ArtTel.ru

G400E User Manual
OpenVox Communication Co. LTD. URL: www.openvox.cn
19
It is time to select the installation way after dependencies detection.
->1) Source code install
(CentOS in addition to Elastix and trixbox, please choose "Sourcecode
install"option by typing "1". After a few seconds orminutes, you will
come to next option that the way you want to install DAHDI)
Looking for dahdi-linux-complete directory in /usr/src ...
1 : /usr/src/dahdi-linux-complete-2.3.0.1+2.3.0
------------------------------------------
n : Download and install dahdi-linux-complete-2.3.0.1+2.3.0.tar.gz
[Default installation]
m : Enter dahdi-linux-complete dir path manually
d : Download the latest version of dahdi-linux-complete
q : Skip the step
(ctrl-c to Exit)
Please select working dahdi-linux-complete directory [1-1, n, m, d, q]:
Figure 9 DAHDI installation ways selection
-->1: /usr/src/dahdi-linux-complete-XXX
(This option means the available DAHDI version which allows you to
type the corresponding number to install. Here the default version
dahdi-linux-complete-2.3.0.1+2.3.0 which are included in the
installation package. If there are any other versions, the system will
automatically look for and showthe outcome.)
-->n: dahdi-linux-complete-2.3.0.1+2.3.0.tar.gz
[default]
http://ArtTel.ru
Table of contents
Other OpenVox PCI Card manuals

OpenVox
OpenVox B200P User manual

OpenVox
OpenVox B400P User manual

OpenVox
OpenVox D230P User manual

OpenVox
OpenVox A800P User manual

OpenVox
OpenVox D210P User manual

OpenVox
OpenVox B400P User manual

OpenVox
OpenVox B200P User manual

OpenVox
OpenVox G400P User manual

OpenVox
OpenVox B200E User manual

OpenVox
OpenVox A400M Series User manual