Optibox 2CICX User manual

Kezelési könyvKezelési könyv
Kezelési könyvKezelési könyv
High Definition
Digital Satellite Receiver
USER'S MANUALUSER'S MANUAL
OPTIBOX HD 2CICX PVR Ready
USER'S MANUALUSER'S MANUAL
High D fin tion D gital Satellite R ce ver
e i i e i
OK

3
1. Features
A. Specifications………………………………………………………………………………...………….5
B. What's inside the package…………………………………………………………………………….....6
2. Hardware Controls
A. Front/Rear panel …………………………………………………………………………………….…..7
B. Remote controller…………………………………………………………………………………….….8
3. Connections
A. Connecting TV & Receiver…………………………………………………………………….………..9
B. Connecting to Dish …………………………………………………………………….………………12
C. Connecting to CI Module (CI Model Only) …………………………………………………………...14
D. Connecting to CA Module (CA Model only) …………………………………………………………14
4. Quick startl
A. Easy Install…………………………………………………………………….……………………….15
B. Easy Config…………………………………………………………………….………………………17
5. Software Operations
A. Basic Settings…………………………………………………………………….……………………18
B. System Setup…………………………………………………………………….………………….…22
C. System preferences…………………………………………………………………….………………24
D. CA…………………………………………………………………….………………………………..25
E. Channel setup…………………………………………………………………….…………………….26
F. USB Functions…………………………………………………………….……………….…………...27
G. Playing TV (or Radio) …………………………………………………………………….…………...32
Appendix
A. Trouble Shooting…………………………………………………………………….…………………35
B. Specifications…………………………………………………………………….…………………….35
C. Glossary of Terms…………………………………………………………………….………………..38

4
Safety Instructions
1. Be sure to read this User's Manual before starting the operation of the receiver.
2. Never open the cover. It is dangerous to touch the inside of the receiver due to possible
electric hazard.
3. Remove the plug from wall outlet when you don't use this receiver for a long time.
4. Do not use a damaged power cord that may cause a fire or an electric shock.
5. Do not touch a power cord with wet hand. It may cause an electric shock.
6. Place the receiver in well ventilated and no-heat environment.
7. When connecting cables, the receiver must have been powered off.
8. Do not plug in/out CI module, when the receiver is powered on. But you can insert smart
card to CI module with powered on.
9. Do not stack the exposed firing device, such as candle, on top of the receiver.
10. Do not expose the receiver to dripping or splashing and that no objects filled with liquids,
such as vase, shall be placed on the apparatus.
11. The socket outlet shall be installed near the equipment and shall be easily accessible.
How to Use This Manual
This manual provides complete instructions for installing and using this receiver.
The following symbols will serve as follow.
Indicates a warning information.
Indicates any other additional or helpful information.

1. Features
5
A. Specifications
Common Parts
Easy Graphic MENU Interface
RS232C Port for Updating Control Software and Additional Service
Supports DiSEqC1.0/1.2, 13/18V, 22Khz Tone
2-SCART Connectors & Composite video & Audio L/R output
1-Component video output (YCbCr output)
HDMI (High Definition Multimedia Interface) supported
Multi-language Function (Menu, Audio)
Last Channel Memory
OSD : Transparency & Blending, 256Palette Colors
Front Panel Buttons & IR Remote Controller User Interface
VFD (Vacuum Fluorescent Display)
Editing Functions (TV/Radio channel's name, Favorite name)
EPG for On Screen Channel Information
Memory for multiple satellite management (up to 64)
3 Operation Modes (Digital TV, Digital Radio, Favorite)
Digital Audio output (S/PDIF)
Support 8 Favorites
Digital Parts
Receives DVB-S1 QPSK, DVB-S2 QPSK, DVB-S2 8PSK Satellite Broadcasting RF Signal/Decodes the
Digitally Encoded Signal
Digital Tuner with Loop-through out
SCPC/MCPC Receivable from C/KU-band Satellite
MPEG-2 MP@ML, MP@HL & MPEG-4 part10 (H.264) Level 4
Teletext Supported Through & OSD
6000 Channels Memory
CI & Smart card Parts (pertinent models only)
DVB Common Interface (Viaccess, Nagra Vision, Conax, Irdeto, Cryptoworks, ASTON, etc)
SMART CARD Interface (CONAX)

6
B. What's inside the package
Satellite Receiver
User's Manual, Remote Controller, 2 of AAA Batteries

2. Hardware Control
7
A. Front / Rear panel
Watching TV status (Live mode) OSD operating status (OSD mode)
1. VFD Display Shows information of selected channel, local time, system status, etc.
2. Channel +/- Change current channel. Move cursor up/down.
3. Volume +/- Increase/decrease volume levels. Change parameter value.
4. OK Shows channel list. Activates the highlighted menu item.
5. Menu Shows system setup software. Quits system setup software.
6. Exit Moves back from current menu or cancels the progressing operation.
7. Tab - Moves among menu items.
8. Power Turns the receiver on/off.
9. CI Slot Receives data from CI module for conditional access.
10. CAS Slot Receives data from Smart Card for conditional access.
11. Exit + Left Tab Change screen output mode. Current mode displays in VFD display screen.
Functions
1. LNB in Receives digital signals from satellite antenna.
2. Loop out Connects to extra receivers. (analogue or digital)
3. USB USB 2.0 HOST / Connector: USB A TYPE / Current Consumption: Max. 500mA
Current Consumption: Max. 500mA
4. RS232 Serial Port Receives new software from PC.
5. HDMI Sends HDMI signal to TV.
6. SPDIF Sends digital audio signal to audio amplifier.
7. Component Out Sends separated analogue signal to TV (Y, Pb, Pr connectors)
8. Composite Out Sends analogue signal to TV (Yellow connector)
9. Audio L/R Out Sends signal to audio amplifier (Red/White connectors)
10. Scart Connector Upper connector sends analogue signal to TV. Under connector receives analogue
signal from to your VCR. VCR signal passes through to TV.
11. Power Cord Receives electric power. Check power specification. (See appendix B-6)

8
B. Remote controller
Buttons
Watching TV status
(Live mode)
OSD operating status
(OSD mode)
POWER Turns the receiver on/off.
1~0 Access specific channel directly. Control numeric, alphabetic
operations.
MUTE Mutes audio output. -
TV Shows TV channel. -
RADIO Shows Radio channel. -
MENU Shows system setup software. Quits system setup software.
LANG Shows list of the audio language
available in current channel. Uses as a hotkey.
PAUSE Pauses video/audio output. Uses as a hotkey.
SLEEP Shows sleep timer in 10 minute
increments.
EPG Shows program guide. -
▲▼ Change current channel. Move cursor up/down.
◀◀ Change volume strength. Change parameters.
OK Displays channel list. Activates selected menu item
EXIT - Exits from menu or sub-menu.
Cancels the progressing function.
INFO Shows current channel's Information. -
FAV Shows favorite programs list. -
V +/- Increase/decrease volume.
Scrolls top level menu when cursor
is in sub-menu.
Go directly to next selection area.
P +/- - Scrolls up/down a page in drop down
list.
FILTER
Directly go to channel filter menu.
(Same function of pressing yellow
button on channel list screen. Go to
page 27.
TTX Shows the list of teletext languages the
current channel supports.
QUICK
FIND Find channel from aplhabet input.
A/V Shows AV Menu
TV/STB Switches between TV mode and STB
mode.
F1 / F3 Reserved.
F2 Shows available DVB Subtitle.
F4 Shows Channel Edit menu.
PVR FUNCTIONS
MEDIA Go to menu directly pvr record list
TMS Start the timeshift function.
RECORD Records the current program
STOP Stops recording or playing a program
PAUSE Stops and continue playing a program
PLAY Play the recorded program or directly
show the pvr record list
<< >> Rewinds/Forwards the recorded
program
SLOW Slow motion playback
JUMP Jumps forward/backward to the
required location(5/10/20/30/60 min)

3. Connections
9
A. Connecting TV & Receiver
Connect between Satellite receiver & TV
Connect coaxial cable from LNB OUT (Satellite) to LNB IN (Receiver).
Connect HDMI cable from HDMI OUT (Receiver) to HDMI IN (TV).
Digital You can enjoy best video qualitiy with this connection.
Connect Component cable(3wires) from Component OUT (Receiver) to Component IN (TV).
Connect Composite Cable from Composite OUT (Receiver) to Composite IN (TV).
Connect Scart cable from TV Scart (Receiver) to Scart IN (TV).
Connect RCA cable (2wires) from Audio Out (Receiver) to Audio IN (TV).
Select one video connection type among V1~V4

10
Connection between Receiver & Audio amplipier
Connect SPDIF Cable from SPDIF OUT (Receiver) to SPDIF IN (Audio Amplifier)
Digital You can enjoy best audio qualitiy with this connection.
Connect RCA cable (2wires) from Audio Out (Receiver) to Audio IN (TV)
Select one audeo connection type between A2, A3
Connection between Receiver & Other device using loop out connector
Connect coaxila cable from Loop OUT (Satellite) to LNB IN (Other device)

3. Connections
11
Complexed connection between Receiver & TV & Audio amp & VCR
Connect Scart cable from VCR Scart (Receiver) to Scart IN (VCR)
Connect Coaxial cable from Antenna OUT (VCR) to Antenna IN (TV)

12
B. Connecting to Dish
Fixed Single Satellite Connection
1. Aim your dish towards preferred satellite.
2. Connect coax cable from LNB/F to LNB IN of the receiver.
Fixed Multiple Satellites Connection
1. Aim your dishes towards preferred satellites.
2. Connect LNB/Fs to the inputs of Switch (DiSEqC)
3. Connect cable from Switch output to your LNB IN connector of the receiver.

3. Connections
13
DiSEqC Positioner Connection
1. Aiming to TRUE SOUTH : Attach the antenna to the DiSEqC mount. Make sure it's at the center of the
mounting tube. Rotate the mount together with the antenna toward TRUE SOUTH. (Use a compass to
find TRUE SOUTH and calculate the magnetic offset)
2. Setting Elevation angle of the mount : Set the Elevation angle of the mount according to your
coordinates (Latitude). Refer Manufactures references to set the Elevation angle by the Elevation scale
on the antenna mount.
3. Setting Declination angle : Refer Manufactures references to set the declination angle by the scale on
the antenna mount.
4. Connect the coax from LNB/F to DiSEqC positioner, and from positioner to LNB IN of the receiver.

14
C. Connecting to CI Module (CI Model Only)
Insert CI module into CI slot for watching TV program from Service Provider.
This CI can be use only SAT program.
D. Connecting to CA Module(CA Model only)
Insert Smart Card into Smart Card slot for watching TV programmes from Service Provider.
This CA can be use both of Terrestrial and SAT program.
Do not plug in/out CI module when the receiver is powered on.
CI module is already attached to receiver, you can plug in/out smart card with power on status

4. Quick Start
15
Easy Install & Easy Config shows most necessary processes to see TV quickly and easily.
At the first time you power on (or after Factory Reset), these features will be displayed.
A. Easy Install
Press Red button to enter EZ Install menu and is started. Ez Install has three steps below.
1. Select Language
If you select language you can view menu and massages as
your favorable language.
If you press UP-DOWN button you can select language for
your convenience.
Press Next(Yellow) button when the selection is completed.
2. Select Region
In this menu if you select favorite region, Sat List will show
you regional list as you select.
If you press LEFT/RIGHT button you can select Region for
your convenience.
If the selection is completed press Next(Yellow) button, if
you want to go to previous menu press Previous(Green)
button.
3. Select Satellites
Select satellites, LNB, DiSEqC for your convenience.
In order to scan, press Scan(Red) button.
To go to previous menu press Previous(Green) button.

16
3-a. Scanning channels in satellite you selected.
3-b. Press Yes button if correct channel list appears.
Before Settings
Make sure you connected lines between Satellite and Receiver and TV correctly.
Turn on your TV and receiver.
Press menu button on Remote Controller to display main menu.
You can navigate menus using Tab buttons on the front panel.
You can navigate sub menus under selected main menu using Arrow buttons
on the remote
controller.

4. Quick Start
17
B. Easy Config
Press blue button to enter EASY Config Menu.
1. Setup main menu.
Menu Language : Select the language for software menus.
1st Audio : Select the language for audio in broadcast.
Subtitle Language : Select the language for subtitle.
HD Mode : Select HD Mode between 576p, 720p, 1080i.
Screen Mode : Select screen mode(Letter Box, Full Screen)
Daylight Saving : Select to use daylight savings or not.
2. Press PIN button to setup password.
3. Press Time button to setup time.

5. Software Operations
18
OSD software consists of main-menu and sub-menu, as you see in the screen above.
Main-menu has 5 items. Each main-menu item has its sub-menu items.
Our software has 3 blocks.
Leftside block is top level menus. (INSTALL, SYSTEM, PREFERENCE, CA, CHANNEL),
Rightside block display sub-menus which is included main icons of each top window.
Functions under sub level menu appear in popup windows.
A. Basic settings
Sat Antenna
With this menu, you can select th
e satellite and set antenna
to search channels. There are up to 64 satellites available.
1. If you press OK at Sat Antenna menu in Install in Main
Menu, the <Sat Antenna> will appear.
2. Use the Up/Down button to select the item, and set up the
parameter with the Left/Right button.
3. If you have completed the setting, use Save(Green) button
to save, Scan(Yellow) button to scan.

5. Software Operations
19
Elements for antenna setup menu
HOTBIRD
ASTRA 19E
INTEL701/C
…
Satellite list
Move the cursor to a satellite and press OK to select the satellite or press
EXIT on the remote controller to go back.
If you press F1 BUTTON on remote control, you can move to SAT LIST directly.
If you have connected to a dual LNB or two antennas connected to a 22KHz tone switch box, set it to "ON".
If you had set LNB Type to Universal, LNB Power and 22KHz switch options are disregarded.
If you set LNB Dish to Moved, DiSEqC switch is disappeared and positioner item is appeared.
On the other hand, if you set LNB Dish to Fixed, positioner item is disappeared and DiSEqC switch is appeared.
Universal LNB : 9750 ~ 10600M.
Sub Menu Parameters Function / Tips
Transponder 12610-V-22000 / … Select Transponder which you want to test
current signal quality.
LNB Type
UNI / WIDE / OCS C-BAND /
5150 / 9750 / 10000 / 10050
/10600 / 10750 / 11200 / 11475
You can select one of the LNB type menu
UNI band width : 9750~10600
LNB Power
Auto / 13V(for V signal) /
18V(for H signal) / Off
Select between vertical and horizontal signal.
13V is for V signal, 18V is for H signal
22KHz
Auto / Off / On Setup the 22KHz switch.
DiSEqC
Mode
Switch(default), Motor, USALS You can set dish's direction from Sat Antenna
menu.
Committed
SNO / 1 / 2 / 3 / 4 To use the DiSEqC switch, set up DiSEqc.
Uncommitted
SNO / 1 / 2 / 3 / 4 Set Uncommitted DiSEqC.
Move
MUEAST / STOP / WEST
While pressing left direction button (◀) on
remote controller, dish rotates to east. Pressing
right direction button (◀), dish rotates to west.
Command
MUGoto Center / Step East /
Step West / Goto E Limit /
Goto W Limit / Set E Limit /
Set W Limit / Clear Limits
Set dish position’s East or West limit, disable
limit value. Change item with Left/Right button
and press OK button to set/disable limit value.
Latitude
U000.00
Set Antenna’s Latitude and Longitude
Put digit directly from remote controller.
Press OK to turn direction from North/East to
South/West
Longitude
U000.00
Set Antenna’s Latitude and Longitude
Put digit directly from remote controller.
Press OK to turn direction from North/East to
South/West
0~100
%
If dish position is moved to the correct position
to receive satellite signal, signal level and
quality color changes(for example to Green), To
save current dish position use Save button
(GREEN).
V

20
Sat Scan
In this menu you can search for specific TPs.
If you h
ave already set the Antenna set up, you can scan the
satellite. In this menu, there are Scan Mode, Network
search and Radio.
If you press OK in Sat Scan button, the <Satellite Scan> will
appears.
Use the Up/Down button to select the item, and set up the
parameter with the Left/Right button.
If you have completed setting, use Scan(Yellow)
button
to scan.
Elements for Satellite Scan menu
HOTBIR
ASTRA 19E
INTEL701/C
…
Satellite list
You can s
elect other satellite to scan channels using UP/DOWN or satellite list(If
you press OK button, then the satellite list will be selected).
Sub Menu Parameters Function / Tips
Scan Mode
Free+CA / Free Only /
CA Only You can designate scanned channel type
Radio CH
Yes / No You can select Radio channel scan or not.
NIT Scan
Yes / No You can select Network Information for added scan from
the Stream or not.
If you press Yellow(Scan) button, all transponders of current satellite are scanned.
Scanning transponders in satellite
you selected.
Press Yes button if correct transponder
list appears on screen.
V

5. Software Operations
21
Transponder Scan
1. If you press OK in TP Scan button, the <Transponder Scan> will
appear.
2. Use the Up/Down button to select the item, and set up the
parameter with the Left/Right button.
3. If you have completed setting, use Yellow(Scan) button to scan
current transponder channel, Red(Add) button to add TP,
Blue(Del) button to delete TP, Green(Edit) button to edit TP
information.
Elements for Transponder Scan menu
10719-V-27500
10723-H-29900
10758-V-27500
…
Buttons Function / Tips
Add Add new TP by setting Frequency, Polarization, Symbol Rate.
Del Delete selected TP.
Edit Edit the TP by setting Frequency, Polarization, Symbol Rate.
Scan Edit the TP value. The Modify item to change the current value.
Factory Reset
Deletes all the data currently saved and returns the system to the
Factory Default status.
Sub Menu Parameters Function / Tips
Satellite Satellites list View satellites selected in Sat Antenna menu.
Scan Mode Free+CA / Free
Only / CA Only Designate scanned channel type
Radio CH Yes / No Select radio channel scan or not.
NIT Scan Yes / No Select network information for added scan
from the stream or not.
V