Optibox tscx pvr ready User manual

USER'S MANU ALMűszaki adatok- 32 -
Audio / Video & adat be/ki menet TV SCARTVCR SCARTRCAS/PDIFRS-232CUSBRGB, CVBS Video, Audio L, R kimenetCVBS Video, Audio L, R kimenetRGB, CVBS, Audio L, R bemenetCVBS Video kimenet, Audio L, R bemenetDigital Audio kimenet (Fiber-Optic)9 pin D-SUB (Male) típus, átviteli sebesség 115KbpsUSB 2.0 Host Support (első/hátsó) RF Modulátor RF csatlakozóFrekvenciaKimeneti csatornaTV StandardBeállított csatorna75Ω, IEC 169-2, Male/Female470 ~ 860MHzCH 21 ~ 69 RemodulátorhozPAL G/ I / K menüben beállíthatóCH 36 (vagy TBD)Menüben változtatható szoftverElőlap NyílásVezérlésKijelző1 USB Host nyílás1 Smart Card nyílás7 GombVFD (Vacuum Fluorescent Display)Méretek Méret (Sz x M x M)Súly (Netó)Működési hőmérsékletTárolási hőmérséklet340mm X 60mm X 230mm 1.6Kg0°C ~ +45°C-10°C ~ +70°CÁramellátás Bemeneti feszültségTípusTeljesítmény felvételKészenléti állapotbanVédelemAC 100 ~ 250V, 50/60HzSMPSMax. 25WMax. 8WSaját belső biztosíték és villám elleni védelem

Table of ContentsSafety Pr ecautions ---------------------------------------------------------- 36 1. Important Safety Instructions 2. NoticeBefore You Begin ------------------------------------------------------------- 38 1. Main Features 2. AccessoriesHardware Description ------------------------------------------------------ 40 1. Front Pan el Configuration 2. Rear Panel Configuration 3. Remote Control UnitConnections Diagram ---------------------------------------- --------------- 44 1. Connecting to Antenna 2. Receiver to TV with RF 3. Receiver to TV and VCR 4. Receiver to Digital Audio Equipment Guide of Functions ----------------------------------------------------------- 47 1. Select Service 2. Information Window 3. Multi-Picture Display 4. Electronic Program Guide( EPG) 5. Satellite List 6. Favorite Group 7. Volume Control 8. PAUSE 9. Sub-Title 10. Audio Track 11. Time shifting, Recording and PlaybackGuide of Main Menu --------------------------------------------------------- 54 1. Configuration 2. Installation 3. Utilities 4. CA 5. Service ListTroubleshooting------------------------------------- ------------------------- 64Specifications----------------------------------------------------------------- 65Table of Contents- 35 -

Safety PrecautionsSafety Precautions- 37 -- 36 - Safety Preca utions1. Important Safety InstructionsRead these instructions.Keep these instructions.Heed all warnings.Follow all instructions.Do not use this apparatus near water.Clean only with dry cloth.Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.Do not reverse the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.Only use attachments/accessories specified by the manufacturer.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.Unplug this apparatus during lightning storms or when unused for long periods of time.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.WARNINGTO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THE SET TO RAIN OR MOISTURE.2. NoticeThese serving instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.The mains plug is used as the disconnect device. The disconnect device shall remain readily operable.TO REDUCE THE R ISK OF E LECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).NO USER-S ERVICEABLE PARTS A RE INSIDE.REFER SERVICING TO Q UALIFIED SERVICE PERSONNEL.The Lightning Flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to personsThe exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instru ctions in the literature accompanying the product

Hardware DescriptionHardware Description- 41 -- 40 -1. Front Panel ConfigurationHardware Description1. VFD(Vacuum Fluorescent Display) : The VFD consist of 8-digit letter and various icons. These letters and icons display the status of receiver as follows. : Indicates that current service is pay service. : Turned on during playback. : Turned on during rewind in playback mode. : Indicates that current service is paused. : Turned on during fast forward in playback mode. : Turned on during recording. : Turned on when you press a button in remote controller. : Indicate that sleep timer is set up. : The time that is set with timer manager is come, this icon is turned on. : Indicates that smart card is inserted. : Indicates that current service is locked. : Indicates that external USB device is connected. : Turned on during live mode. : Indicates that set-top box is accessing files in the external USB device. : Indicates that current service is radio service. : Indicates that current service is TV service. : Indicates that current service supports Dolby digital audio. : Display service name, time and other information with letter.
HDDAUDIOVIDEOUSB
qewrtyuioasdfghjklqwertyuioasdfghjkl
HDDAUDIOVIDEOUSBUSBHDDAUDIOVIDEO
2. POWER Button : Press to switch between STANDBY and POWER ON modes.5. CH Up/Down Button : Press to change services in normal mode, to move the highlighted-bar UP/DOWN in menu mode.3. MENU Button : Press to enter the main menu or to move to the previous menu.4. OK Button : Press to display the service list in non-menu mode and to select an item or confirm in menu mode.6. VOL Up/Down Button : Press to change audio volume or to navigate menu in menu mode.Supplied by Karmacom Ltd., EU
ANT IN
LOOP OUT
TSCX PVR READY
HDDAUDIOVIDEOUSB
SatellitETerestriaL
1234562415698101112151373142. Rear Panel Configuration3. LNB IN : Use to connect a satellite antenna.4. LNB OUT : Use it when connecting to another STB for loop-through.5. VIDEO : Use to connect to video input of TV or VCR.7. SPDIF : Use to connect SPDIF to digital audio equipment. (Optic)8. VCR SCART : Use to connect to the VCR via a SCART cable.9. TV SCART : Use to connect to the TV via a SCART cable.10. RF OUT : Use to connect to RF(ANT) input jack of TV.11. RF IN : Use to connect a general Aerial Antenna.12. RS-232C : Use it when connecting to your PC.13. USB : Use to connect to external USB device.15. POWER : Power switch6. AUDIO L/R : Use to connect audio left, right of TV or VCR.1. ANT IN : Use to connect a aerial antenna.2. LOOP OUT : Use it when connecting to RF input on your TV or VCR.14. 0/12V : Use when you need DC 12V power supply.

Hardware DescriptionHardware Description- 43 -- 42 -3. Remote Control Unit1. POWER : Turns the STB On/Off.2. MUTE : Turns the sound On/Off.3. UHF : To adjust UHF service.4. SLEEP : To adjust sleep timer.5. TV/SAT : Toggles the TV output source between the satellite input and UHF/VHF antenna input.6. TV/RADIO : Switches between TV and Radio.7. NUMERIC Keys : Controls the numerical operation and service numbers directly.8. EPG (Electronic Program Guide): Show the TV/Radio program guide.9. INFO : Shows the information of the current program. If you press one more, detail information box will be shown.1POWER3UHF4SLEEP7NUMERIC Keys8EPG10MENU12ARROW13OK14PAGE UP/DOWN17FAV19PLAY LIST20SUBTITLE23PREV FILE24NEXT FILE27RECORD28PLAY/TIME SHIFT2MUTE5TV/SAT6TV/RADIO9INFO11EXIT12ARROW15RECALL16SAT18COLOR Keys21PAUSE22TELETEXT25FAST FORWARD26REWIND29STOP10. MENU : To enter the main menu or to move to the previous menu.11. EXIT : Exit from the menu or pop-up window.12. ARROW : Moves the highlight bar for selecting options on the menus. And this key is used to change services( CH▲ / CH▼) or change audio volume ( VOL◀ / VOL▶).13. OK : Show the service list in non-menu mode and select an item or confirm in menu mode.
14. PAGE UP/DOWN : Move to the next or previous page if more than one page are available. PAGE UP key is also used as hot-key to move to Timer Manager menu(Refer to 1.2 Timer Manager). And PAGE DOWN key is also used as hot-key to move to Picture Adjust window (Refer to 1.6 A/V Output Setting).
15. RECALL : Moves to previous service.16. SAT : To change the satellite groups.17. FAV : To change the favorite groups.18. COLOR Keys : Used for special function in menu. RED key is used to add or delete the current position as a bookmark. GREEN key is used to go to the next bookmark position. BLUE key is used to display multiple pictures.19. PLAY LIST : To display recorded service list.20. SUBTITLE : To show multilingual subtitle.21. PAUSE : This key is used to pause the video. Press once more to resume the video.22. TELETEXT : To show the digital teletext.23. PREV FILE : To play the previous MP3 file in MP3 play mode.24. NEXT FILE : To play the next MP3 file in MP3 play mode.25. FAST FORWARD : Start fast forward or fast motion playback. Change the speed of forward playback. 26. REWIND : Rewind when the progress bar is displayed. Start reverse playback. Change the speed of reverse playback. 27. RECORD : To start recording.28. PLAY/TIME SHIFT : Display the progress bar of playback when no progress bar is displayed. Start playback with normal speed. Return to normal speed from trick mode.29. STOP : To stop time shifting, play back or recording.NOTEWhen inserting batteries, make sure that the polarity (+/-) is correct.

Supplied by Karmacom Ltd., EU
ANT IN
LOOP OUT
Supplied by Karmacom Ltd., EU
ANT IN
LOOP OUT
Supplied by Karmacom Ltd., EU
ANT IN
LOOP OUT
Connections DiagramConnections Diagram- 45 -- 44 -2. Receiver to TV with RFConnections D iagram1. Connect antenna cable to receiver, refer to above section, 1. Connect ing to Antenna.2. Connect the RF OUT to RF IN of TV.3. Connect the VIDEO and AUDIO L, R to VIDEO IN and AUDIO L, R IN of TV.4. Connect the TV SCART to SCART of TV.AUDIO RAUDIO LVIDEOSCART
RF IN
1. Connecting to Antenna1. Connect the aerial antenna cable to ANT IN.2. Connect the Satellite antenna cable to LNB I N.Aerial ANTENNASATELLITE Antenna3. Receiver to TV and VCRRF OUTRF IN1. Connect antenna cable to receiver, refer to above section, 1. Connect ing to Antenna.SCARTSCART2. Connect the RF OUT to RF IN of VCR.3. Connect RF OUT of VCR to RF IN of TV.4. Connect the TV SCART to SCART of TV.5. Connect the VCR SCAR T to SCART of VCR.
6. Connect other jacks to the appro priate jacks of TV refer to above section, 2. Receiver to TV with RF.
RF IN

Connections Diagram- 46 -4. Receiver to Digital Audio Equipment1. To get bett er quality audio, you can use digital audio via optical cable. If you have a digital audio equipment, connect SPDIF to Digital audio input of the equipment.2. Connect other jacks to the appropriate jacks of TV or VCR refers to above sections, 1. Connecting to Antenna, 2. Receiver to TV with RF and 3. Receiver to TV and VCR.Guide of Functions- 47 -SPDIF(Optic)Digital Audio EquipmentSupplied by Karmacom Ltd., EU
ANT IN
LOOP OUT
1. Select ServiceGuide of FunctionsTo select the desired service, you can use below methods.
1.1 Using UP/DOWN buttons
You can navigate between services using UP/DOWN buttons. Whenever you press the UP(DOWN) button, current service will be changed to next(previous) service. You have to press UP or DOWN button until find the service you want.
1.2 Using NUMERIC buttons
If you know the service number, enter the number directly using NUMERIC buttons.
1.3 Using Service List
To select the desired service in the service list, you should firstly display the service list using OK button.Use ARROW buttons to select a desired service and press OK button.In the Service List window, you can also use additional functions with COLOR buttons.Press RED button, you can sort the services by Alphabet, Transponder, Group and CAS. Press GREEN button, you can add the service to one of 10 favorites.2. Information WindowIf, you want to view the current service information window press INFO button. Then the Information window will appear. This Information window is automatically displayed when changing services. This window contains many items such as service number, service name, scrambled service, Teletext, subtitle, Dolby Digital symbol, duration time and so on.Press INFO button once more, you can get more detailed information3. Multi-Picture DisplayPress the BLUE button to display multiple pictures and RED button display 9 or 12 multiple pictures option.

Guide of Functions- 48 -Guide of Functions- 49 -9. Sub-Title
To display Sub-title press SUBTITLE button on your remote control. Sub-title is based on the transmitted data.
10. Audio Track
You can select the audio language list by pressing the AUDIO button. Use the ARROW buttons to choose the audio track from the list than press OK to change.
4. Electronic Program Guide(EPG)Electronic Program Guide (EPG) helps you navigate through all the possible viewing options.The EPG supplies information such as program listings, start/end times and detailed information about the program listings for all available services. The availability and amount of these program details will vary, depending on the particular broadcaster.1. If you press EPG button, EPG menu will be displayed.2. Press the ARROW buttons to move to other service or to see previous/next guide.3. Press EPG button once to view full EPG (Entertainment Program Guide) and press button twice to view only selected EPG. Press button consecutively to go back and forth.4. Press GREEN button to view next day EPG and RED button to view EPG for previous day.5. Select the program by using the ARROW buttons then set the timer by pressing OK.
6. You can make a reservation for recording on EPG menu. - Press RECORD button to reserve the event. This reservation can be checked under the Timer Manager Menu. - To cancel the reservation for recording by RECORD button at the appointed event.
5. Satellite List
Select the SAT (satellite) button to view all satellite & terrestrial listings. Scroll through the various satellites using the ARROW buttons, and select the appropriate satellite by pressing OK.
6. Favorite Group
Select the FAV (favorite) button to view all favorite groups. Scroll through the various favorite group using the ARROW buttons, and select the appropriate satellite by pressing OK.
7. Volume Control1. To control audio volume while you are watching a service, press LEFT/RIGHT button to control volume.2. Volume control bar will be appeared in top of the screen.3. When necessary, press MUTE button to turn audio sound on/off.8. PAUSEThe PAUSE button is used to freeze the video. Press PAUSE button once more to resume the video.11. Time shifting, Recording and Playback
11.1 Recording
q Recoding Method: There are two types of recording method. (Time Reserved Recording / Event Reserved Recording).
a) Time Reserved Recording: In Timer Manager you may set your time/program during this process.
- Main Menu - Configuration - Timer Manager.- Timer Edit screen you may choose start time, end date/time, mode, type (Recording/Play) and simply press Yes button to reserve you recording schedule. Also, you must set you start time and end time to minimum of 5 minutes; start time must be present time.- Press GREEN button to activate the new timer edit screenb) Event Reserved Recording: EPG screen choose the event you wish to reserve or record.- During LIVE TV press EPG button to access EPG screen.- Go to the event which you wish to view and then press OK. The event will be reserved with BLUE play icon. This BLUE play icon means that you want to just watch the event at the reserved time.
- Press the OK one more time then the event will be reserved with RED dot icon. This RED dot icon means that you want to record the event at the reserved time.

Guide of Functions- 50 -Guide of Functions- 51 -PAUSE iconPlay icont Pause during recordinga) Press PAUSE ( ) button to pause the live TV but will continue to record to you external HDD.b) Press PAUSE button once again and event will resume from the pause time. c) During recording press PLAY button to show Play bar screen.
d) During Play bar screen you may use the RIGHT/LEFT button to move freely in recorded time.
e) If you press STOP button it will go to LIVE and you may press PREV FILE ( ) button to view recorded file from the beginning. 11.2 Time shift
q Press PAUSE button to pause the live TV but will continue to record to external memory.
- When you set an event for recording in EPG. It automatically set in the Timer Event in Main Menu - Configuration - Timer Manager.
w Instant Recording: At anytime, you may press RECORD button to start you recoding instantly.
e Recording Edit: During recording, you may press RECORD button to edit recording duration time. As it defaulted to 2 hours but you may increase or decrease as you desire.r Long Time recording: During long time recording process 4GB or more, additional files may be created every 4GB. (For example; aaa.ts, aaa.ts1, aaa.ts2… and so on) You must remember not to erase any of duplicated file. These files are only able to view with your PC not with receiver.w Press PAUSE button once again and event will resume from the pause time.e During watching live TV press PLAY/TIMESHIFT button to show play bar screen.