Optimus OPTIMUS KIT User manual

www.optimus-uk.com T | [phone] E | inf[email protected]
OPTIMUS KIT INSTALLATION GUIDE
!
TELGUARD POWER SUPPLY UNITS MUST BE USED AND SHOULD NOT POWER ANY OTHER EQUIPMENT.
A SITE SIGNAL NETWORK TEST IS TO BE UNDERTAKEN BEFORE INSTALLATION
CONFIGURATIONS AND CONNECTIONS
MAIN OPTIMUS KIT HUB PCB
WHEN CHANGING RELAY MODULES
z
Power Off
z
Ensure Correct Alignment SEE REVERSE FOR INSTALLATION TIPS
HUB and SATELLITE
CONNECTIONS:
– External Speaker from
Satellite Panel(s)
– 12V Supply to Satellite
– External Mic from
Satellite Panel(s)
– External CAN Bus
to/from Satellite Panel(s)
Wire Hi to Hi / Lo to Lo /
0V to 0V
OPTIMUS KIT I/O BOARD
Used ONLY in Optimus KIT Satellite Panel OPTIMUS KIT ECO SAT PCB
Used ONLY in Optimus KIT Satellite Panel
Expansion CAN Bus
Socket for Displays,
Keypads etc.
OK LED
GREEN Flashing
= Normal Operation
Onboard Solid State Relay
60V AC/DC
200 mA
STATUS LED RED Closed

Raising Standards
Safety Assured
INSTALLATION TIPS
z
Connectors on Satellite PCB can be daisy chained to other Satellite panels, or wired back to the hub.
– Max 2 Satellites connected Star configuration (max 300m per spur)
AND/OR Daisy configuration (max 300m in total)
z
Each Satellite panel will be numbers 1 – 2.
– Please ensure each system does not include identical panel numbers.
z
Recommended to use 8 Core CAT 5 cable:
– Twisted Pair x 2 Mic
– Twisted Pair x 2 Speaker
– Twisted Pair x 2 CAN
– Twisted Pair x 2 Power
EU CE Declaration of Conformity and Radio Equipment Directive is available at www.commtel-uk.com | GB-RH10 9XN
OPT_KIT_IG_ISSUE 1_08.20
www.optimus-uk.com T | [phone] E | inf[email protected]
OPTIMUS KIT INSTALLATION GUIDE
!
TELGUARD POWER SUPPLY UNITS MUST BE USED AND SHOULD NOT POWER ANY OTHER EQUIPMENT.
A SITE SIGNAL NETWORK TEST IS TO BE UNDERTAKEN BEFORE INSTALLATION
CONFIGURATION EXAMPLE:
PEDESTRIAN GATE
GATE
CONTROL
BOX
HUB
MAIN GATE