Orava LiveBass2 Gaming User manual

PPEN
Gaming headphones with USB and microphone
Instruction manual EN
Gaming

2EN 3EN
Intended use of the device
• The device is intended for personal listening to the content of audio files,
to the extent determined by technical and operational parameters and
functions, safety and user instructions and the external influence of the
operating environment.
• ORAVA electrical appliances are manufactured in accordance with the
state of the art and recognized safety regulations. Nevertheless, incorrect
and unprofessional use or use contrary to the intended purpose may
create a risk of injury or endanger the life of the user or a third party, resp.
damage to equipment and other property.
Special safety instructions.
Read carefully!
The following symbols and their meanings have been used on the device
and in the accompanying documentation to warn of possible dangers:
This symbol alerts users to the risk of failure to observe the safety
instructions when using and operating the equipment:
Danger of serious injury or death! Danger of equipment damage
or other property damage!
This symbol alerts users to:
Avoid listening at high volume and for a long time! Using the
headphones or earphones at high volume levels and for extended
periods of time may damage your hearing.
If you are exposed to sound with an intensity of more than 85 dB
for a long time, your hearing may be adversely affected.
Volume above 85 dB for 8 hours, or 100 dB for 15 minutes is a
danger.
The manufacturer recommends that you do not set the volume
level of the device higher than the middle level of the setting
range.
Transport/Carrying
• When transporting and carrying, be careful when moving to avoid tipping
over, falling and damaging the device.
Danger of damaging the device!

2EN 3EN
Unpacking/Packaging
• Unpack the device and accessories before putting them into operation and
dispose of all parts that increase the packaging materials, labels and tags.
• Store packaging materials in a safe place or keep them out of the reach of
children and incompetent persons.
Danger of serious injuries! Danger of suffocation!
Inspection/Commissioning
• The Office initially recommended several other control devices. Use the
device only with accessories supplied and approved by the manufacturer.
• Never use the device if it is incomplete, damaged or its parts or
accessories are damaged during use (e.g. a subsequent fall).
Danger of serious injuries!
• Before commissioning, check and assemble the device according to the
instructions in the “Before use” section.
• Never clean the device in a way that could immerse the liquid and allow
the liquid to flow into the device.
• Clean only parts of the device with a damp cloth and wipe dry or allow to
dry.
Keep the device clean and dry.
Warning!
• If the device has been stored at lower temperatures, it must first be
acclimatized (about ½ to 1 hour) before further use to remove any water
inside the housing, solidify moving parts and maintain the mechanical
strength of the plastic parts.
Operation/Use
Warning!
• This device may only be used with original and
undamaged parts and accessories.
You can read about suitability and correct use in the
section “Use”.
Danger of serious damage to health!
Warning!
• The device must be kept dry.
• Do not use or place the device near containers
containing water. If the device falls into water, turn it off
and allow it to dry completely.

4EN 5EN
• If the device subsequently shows signs of malfunction
or damage, take it to a specialist garage for inspection.
• Never overload the device beyond the limits set by the
technical parameters!
• Do not expose the device to:
- direct sunlight, sources producing excessive heat,
- vibration and mechanical stress,
- chemical pollutants,
- water and excessive humidity,
- insects, plants,
- aggressive environmental influences.
Danger of serious injuries!
There is a risk of damage to the device or other
property damage!
• When using the device, the perception of ambient noise
is limited. Therefore, do not operate any vehicles or
machines while using it.
Operating environment safety
• Do not use the device in an industrial or outdoor environment.
• Always keep the operating environment of the device clean and well lit.
• Do not place the device on an unstable surface. Overturning or dropping
the device may result in personal injury or damage to the device.
• Do not expose the device to:
- electromagnetic fields,
- direct sunlight, sources and equipment producing excessive heat,
- falls, vibrations and mechanical stress,
- excessive dust,
- water and excessive humidity,
- insects,
- aggressive environmental influences.
• Exposure to the above effect may adversely affect its operation or cause
irreversible damage.
• The operating environment of the device must always comply with the
specified basic characteristics.

4EN 5EN
• Do not use the device in areas with flammable liquids, gases or dust. The
device can be a source of sparks, which can result in the ignition of dust
or fumes.
Characteristics of the operating environment
1. Ambient temperature: +5 - +40 ° C
2. Humidity: 5 - 85%
3. Altitude: < 2 000 m
4. Occurrence of water: occasional condensation of water or the presence
of water vapor. 5. Occurrence of foreign bodies: the amount and type of
dust are not significant
Description of parts
1 adjustable head bridge
2 right handset
3 microphones
4 left handset
5 On/Off microphone
6 volume control
7 3.5 mm jack reduction

6EN 7EN
Headphone connection
The headphones allow you to listen to the sound from the connected
external device.
PC connection
• Connect the USB cable to the computer, then connect the reducer (7)
to the 3.5 mm jack and connect it to the PC - audio link (green) and
microphone (red).
• Use the button (5) to switch the microphone on/off.
• Use the control (6) to adjust the volume.
Connect to other devices
• Connect the 3.5 mm jack connector to devices such as Xbox, PS,
notebook, mobile or tablet.
• Use the button (5) to switch the microphone on/off.
• Use the control (6) to adjust the volume.
PC
Gamepad Notebook Tablet Switch cellphone

6EN 7EN
Troubleshooting
It is recommended that you connect this device directly to a USB port on
your computer.
When connecting a device via a USB hub (hub), make sure that your USB
hub (hub) and the USB port on the computer to which it is connected are
capable of supplying enough power to power all devices connected to the
same USB hub (hub).

8EN 9EN
Maintenance and information
Cleaning the surface of the device
Use a soft cloth slightly moistened with water to clean the surface of the
device and controls.
Do not use any type of abrasive pad, scouring powder, or solvent, such as
thinner, petrol, or alcohol.
Headphones have a quality construction and design and should therefore
be handled with care. The following suggestions will help you protect your
warranty coverage.
• Keep the headphones dry. Precipitation, humidity, and all types of liquids
or moisture and condensates contain minerals that cause corrosion of
electronic circuits. When the headphones get wet, allow them to dry
completely.
• Do not use or store the headphones in dusty, dirty areas. Its moving parts
and electronics can be damaged.
• Do not store headphones in hot areas. High temperatures can shorten
the life of electronic circuits, damage batteries, and warp or melt certain
plastics.
• Do not store headphones in a cold environment. When the headphones
warm up to operating temperature, condensation may form inside the
headphones and damage electronic circuits.
• Do not attempt to open the headphones.
• Do not drop, knock, or shake the headphones.
Rough handling can break internal circuit boards and fine mechanics.
• Do not color the headphones. Paint can clog moving parts and prevent
proper operation.
Warning!
Listening at high volume may damage your hearing. For road safety, do
not use the device while driving or cycling.

8EN 9EN
Technical specifications
Microphone
Type: omnidirectional, electret capacitor
Dimensions: 6 x 2.2 mm
Sensitivity: - 42 dB ± 3dB
Frequency: 100 - 16 kHz
Headphones
Type: closed stereo headphones
Rated power: 20 mW
Headphone speakers: closed, dynamic, 2x drivers with a diameter of 50 mm
Frequency range of reproduction: 20 Hz - 20 kHz
Impedance: 32 ohm ± 15%
Sensitivity: 6 dB ± 3 dB
Generall
Dimensions (W x H x D): 210 x 195 x 95 mm
Weight: 390 g
Cable length: 2,2 m
Connectors:
AUDIO IN (3.5 mm mini connector)
USB connector (power supply - DC 5 V - light)
Supplied accessories:
headphones (1 pc)
instructions (1 pc)
3.5 mm reduction (1 pc)
We reserve the right to make changes!

10EN 11EN
DECLARATION OF CONFORMITY
Short text Declaration of Conformity:
ORAVA retail 1, a.s. hereby declares that the LiveBass 2 C/B Gaming complies with the essential require-
ments and other relevant conditions of Directive 2014/53/ EU of the European Parliament and of the Council.
The full text of the Declaration of Conformity is available at: www.orava.eu
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
The symbol on the product or on its packaging indicates that this product does
not belong to household waste. It is necessary to take it to a collection point for
electrical recycling and electronic equipment.
By ensuring proper disposal of this product, you will help prevent negative
consequences
to the environment and human health that would otherwise be caused by
inappropriate disposal of this product. For more detailed information about recycling
of this product, please contact your local authority, your household waste disposal
service or the shop where you purchased the product.
This product meets all the essential requirements of the EU directives that apply to it.
Producer:
Importer:
ORAVA retail 1, a.s.
Seberíniho 2
821 03 Bratislava
Slovenská republika
ORAVA distribution CZ, s.r.o.
Ostravská 494
739 25 Sviadnov
Česká republika
ORAVA retail 1, a.s.
Seberíniho 2
821 03 Bratislava
Slovenská republika