Orbit StarStrider SS55C User manual

Contents 1
Safety Caution 2-3
Assembly instruction 4-6
Operation guide 7-19
How to fold and move 20
Suggested stretches 21-22
Maintenance 23-24
Exploded drawing 25
Part list 26
TROUBLE SHOOTING 27
1
CONTENTS

When using this product, basic precautions should always be followed, including the following:
Please read the instruction carefully before starting to use this product.
Danger –To reduce the risk of electric shock：
1. Always unplug this product from the electrical outlet immediately after using and before
cleaning.
Warning –To reduce the risk of burns, fire, electric shock, or physical injury：
1. The product should never be left unattended while plugged in. Unplug the product from the
outlet when not in use.
2. Close supervision is necessary when this product is used by or near children, invalids, or
disabled persons.
3. Be sure to use the product only for its intended use as described in this manual. Do not use
any attachment not recommended by the manufacturer in order to avoid any danger or
accidents.
4. Never operate the product if it has a damaged cord or plug, if it is not working properly, if it
has been damaged, or dropped into water. Please return the product to the service center of
seller for examination and repair.
5. Do not carry this product by the supply cord or use the cord as a handle.
6. Keep the cord away from hot surfaces or ground.
7. Never operate the product with the air vents blocked. Keep the air vents free of lint, hair, etc.
8. Never drop or insert any objects into any openings.
9. Do not use or operate outdoors.
10. Do not operate where aerosol (spray) products are being used or where oxygen is thin.
11. Before turning the product power off, turn all controls to the off position then remove the plug
from the outlet.
12. Connect the product to a properly grounded outlet only.
13. If the treadmill is foldable, when user finishes using the treadmill, the elevation needs to be
back to original position.
14. When user is using the treadmill, it cannot be folded at the same time.
15. Keep a safety zoom of 2000mm x 1000mm away from the treadmill.
16. This machine is only intended for household use.
17. For the treadmill with folding function and electric elevation, be sure that the elevation is 0
before folding (To avoid interference of the components).
18. Stop using the treadmill if you feel faint, dizzy, or short of breath.
19. Wear appropriate exercise clothes when using the treadmill. Do not wear loose clothes that
could become caught in the treadmill. Athletic support clothes are recommended for both
men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing
only stockings, or in sandals.
2
SAFETY CAUTIONS

GROUNDING INSTRUCTIONS
The products must be grounded first. If malfunction or breakdown occurs, grounding will provide
a path of least resistance for electric current to reduce the risk of electric shock.
The product is equipped with a cord having an equipment-grounding conductor and a grounding
plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Danger–Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the products are properly grounded. Do not modify the plug provided with the product –
if it will not fit the outlet, have a proper outlet install by a qualified electrician.
The products is for use on nominal 220-240 volt and has a grounding plug that looks like the
plug illustrated in the figure . Make sure that the product is connected to an outlet having the
same configuration as the plug.
There is no need to use any adapter for this product.
Figure
Grounding methods
GROUNDED PIN
GROUNDED OUTLET
OUTLET
3
SAFETY CAUTIONS

OPEN THE BOX YOU CAN FIND THE ALL PARTS AS BELOW
Part list
No.
Description
Quantity
No.
Description
Quantit
y
1
MAIN FRAME
1PC
11
FLAT WASHER M8
8PCS
2
LEFT UPRIGHT
1PC
12
SCREW M6*10MM
4PCS
3
RIGHT UPRIGHT
1PC
13
SAFETY KEY
1PC
4
CONSOLE SET
1SET
14
LUBRICATION OIL
1PC
5
BASE COVER-L
1PC
15
SCREWDRIVER
1PC
6
BASE COVER-R
1PC
16
WRENCH 6MM
1PC
7
BOLT M10*50MM
6PCS
17
WRENCH 5MM
1PC
8
BOLT M8*15MM
8PCS
18
FRAME WHEEL COVER-L
1PC
9
SCREW M5*12MM
4PCS
19
FRAME WHEEL COVER-R
1PC
10
FLAT WASHER M10
6PCS
20
Connecting tube
1PC
4
ASSEMBLY INSTRUCTIONS

STEP 1
1. Please note that this treadmill need at
least 2 people to finish assembly.
2. Open the carton box, and take out all
the protection foam and assembly parts.
3. As the photo shows, take out the
running deck from the box, lay it on the
flat floor, and then cut the belt.
STEP 2
1.Lift up the left upright(2) and right
upright(3),and then use the #6 wrench(16) to
fasten each upright onto the base with each 3pcs
of bolt M10*50mm(7) and flat washer M10(10)
2.Do not tightly fasten all the bolts and scews at
this step.
STEP 3
1.Use the #5 Wrench(17) to fasten the cross bar
onto the left and right uprights(2,3) with each 4p
cs bolt M8*15(8) and flat washer M8(11)
5
ASSEMBLY INSTRUCTIONS

STEP 3
1. Connect the signal wire from console to the
signal wire of the left and right uprights.
2. Use the 5# wrench (17) to fasten the console
to the left and right upright with each 4pcs M8x15
bolts (8) and flat washers M8(11)
Pay attention to the connection of the cable, a
wrong connection or rough operation would
cause damage of the connector
3. Tightly fasten all the bolts at step 2 and step 3
STEP 4
1.Use the screwdriver(15) to fasten the left
base cover(5) and right base cover(6) onto the
left and right uprights with 4pcs bolt M5*12(9).
2.Use the screwdriver(15) to fasten the left
frame wheel cover(18) and right frame wheel
cover(19) onto the main frame(1) with 4pcs of
bolt M6*10.
NOTE: For your safety and comfort,
please check if all screws are fastened.
Congratulation!
A brand new motorized treadmill has
been successful assembled!
6
ASSEMBLY INSTRUCTIONS

GENERAL SAFETY TIPS
A. Practice mounting and dismounting your treadmill before beginning your workout.
B. Attach the Safety Key to the Computer (the treadmill will not operate without the Safety
Key). Clip the other end of the Safety Key to your clothing before exercising to ensure the
treadmill will stop if the user accidentally walks off the Treadmill.
C. If the user falls off the Treadmill, the Safety Key will come off the Computer and the
treadmill will stop at once to avoid further injury.
D. Do not stand on the Walking Belt while starting the Treadmill. Straddle the Belt and
stand on the plastic Foot Rails.
E. The Treadmill will start at 1.0KM/H after countdown. If you are a new user, stay at a
slow speed and hold onto the Hand Grips until you become comfortable.
QUICK REFERENCE GUIDE
A
TIME WINDOW
F
QUICK SPEED BUTTON
K
START BUTTON
B
DISTANCE WINDOW
G
MODE BUTTON
L
STOP BUTTON
C
INCLINE WINDOW
H
PROGRAM BUTTON
M
APP FIGURE
D
SPEED WINDOW
I
INCLINE∧/∨BUTTON
N
PHONE FIGURE
E
QUICK INCLINE BUTTON
J
SPEED+/- BUTTON
DISPLAY FUNCTION
TIME: Accumulates total workout time from 0:00 to 99:00 minutes.
PULSE: When pulse signal is detected by grasping both stainless steel pick-ups on front
handrails, it will display your current heart rate in beats per minute from 50 to 200..
INCLINE: Displays the current deck incline from starting at level 1 to 15.
SPEED: Displays the current belt speed from starting at 1.0KM/H to max speed.
CALORIE: Accumulates calorie consumption during exercise. Max. Valueis 990 KCAL.
DISTANCE: Accumulates total workout distance from 1.00 to 99.0 kilometers by count-up.
Accumulates total workout distance from 99.0 to 1.00 kilometers by count-down.
7
OPERATION GUIDE

GETTING STARTED
NOTES:
1. Check to make sure nothing is on or will hinder the movement of the treadmill.
2. Plug in the power cord and turn the treadmill ON.
3. Stand on the foot rails of the treadmill.
4. Attach the safety key clip to part of your clothing.
5. Put the safety key into the safety key hole in the console, and then the treadmill will be
on start/ready status.
6. You have two options to start your workout:
A.QUICK START
Simply press the START button to begin working out.
B.SELECT A PROGRAM
Select manual program by pressing MODE button or pressing PROGRAM buttons to
enter manual program, 8 training goals or 3 user programs.
QUICK-START OPERATION
STEP 1: Attach the Safety key to wake display up; the treadmill then will be on start/ready
status.
STEP 2: Press the START button to begin belt movement after count-down. Use the
SPEED +/- or QUICK SPEED buttons to adjust the desired speed at any time during
training; use the INCLINE ∧/∨or QUICK INCLINE buttons to adjust the incline at any
time during training.
STEP 3: To get a pulse reading, simply grasp stainless steel pick-ups on handrails. It may
take a few seconds for the display to reach the actual number. The pulse rate will be
displayed on PULSE window.
STEP 4: During quick-start operation, TIME, CALORIE and DISTANCE will count up.
MANUAL PROGRAMS OPERATION
NOTES: Under this program, one of DISTANCE, CALORIE and TIME can be set
count-down for your workout, the others will count up during your workout, after
one count-down reach zero, program will be ended and stop the belt movement, if
you need to continue, press the START button to begin belt movement after
count-down.
STEP 1: Attach the Safety key to wake display up; the treadmill then will be on start/ready
status.
STEP 2: Press MODE button, the TIME window will display 30:00, press SPEED +/-
button to set count-down TIME from 5:00 minutes to 99:00 minutes.
If you do not like to set TIME for count-down and pass to others, press MODE again, the
DIST window will display 1.0, you can set count-down DISTANCE from 1.0KM - 99.0KM.
If you do not like to set DISTANCE for count-down and pass to others, press MODE
again, the CAL. window will display 50, you can set count-down CALORIE from 20 KCAL
to 990 KCAL.
STEP 3:After finishing setting count-down for your workout, press START to begin belt
movement after count-down.
8
OPERATION GUIDE

STEP 4: During the program you can adjust the speed and incline by pressing SPEED
+/- and INCLINE∧/∨buttons, or QUICK SPEED and QUICK INCLINE buttons to jump
directly to a setting.
STEP 5: Press STOP button to stop your workout or pull safety key away from its position
to shut down the computer.
PRESET PROGRAMS OPERATION
NOTES:
All the preset programs are made up with 18 time-based segments; the speed and
incline are preset on each segment. The elapse time of 18 segments on each
program will be automatically arranged according to the time you set for your
workout time. There are 64 preset programs for 8 different training goals, and 8
different intensity levels on each training goals.
STEP 1: Attach the Safety key to wake display up; the treadmill then will be on
start/ready status.
STEP 2: Press PROGRAM button to scroll through the 8 training goals, and BODY FAT
function. A training goal will be selected once you press PROGRAM button. After
selecting a training goal, press MODE button to select a intensity from L1 to L8. After
selecting a intensity, then press SPEED +/- buttons to modify the elapsing time. The
pre-set elapsing time of each program is 30:00 minutes, and it can be set from 5:00 to
99:00 minutes.
STEP 3: After modifying the elapsing time, press START button to accept and begin your
workout.
STEP 4:During procession of program you can adjust the SPEED & INCLINE by pressing
SPEED +/- and INCLINE∧/∨buttons, or use QUICK SPEED and QUICK INCLINE
buttons
to jump directly to a setting. However, the SPEED and INCLINE you adjust will only be
effective on the ongoing segment, after the segment finished, the SPEED and INCLINE will
process with preset values.
STEP 5:Press STOP button to stop your workout or pull safety key away from its
position to shut down the computer.
USING THE PULSE FUNCTION
The PULSE Window on your Computer works in conjunction with the Pulse Sensors on
both handrails. When you are ready to read your pulse:
1. Place both hands firmly on the Pulse Sensors. For the most accurate reading, it is
important to use both hands.
2. Your estimated heart rate will display in the PULSE window approximately 5 seconds
after you hold the Pulse Sensors.
3. This estimate is not exact and persons with medical conditions and/or a specific need
for accurate heart rate monitoring should not rely on the estimations provided.
9
OPERATION GUIDE

USER PROGRAM
This program is for user to edit a personal program; the speed and incline of each
segment can be edited according as personal’s desire. There are 18 segments on
this program for user to edit workout program.
Once the program is set, it will be stored on the computer, the computer will
proceed the program by pressing START/STOP button. There are totally 3 user
program can be edited.
If you want to re-edit the program, just follow the steps described as bellow.
STEP 1: Attach the Safety key to wake display up; the treadmill then will be on
start/ready status, keep pressing PROG button until the distance window display U-1,
then the TIME window display 30:00, press SPEED+/- to set the program time.
STEP 2: Press MODE button to set segment 01, press INCLINE∧/∨to set incline and
press SPEED+/- to set speed on this segment. After finish setting segment 01, press
MODE button to set all other 2-18 segments.
STEP 3: After finish setting all 18 segments, the program will be stored, and then press
START button to load this program.
BODY FAT SCALE
This function is to estimate your body fat according to the basic information of you
body condition.
This estimate is not exact and persons with medical conditions and/or a specific
need for accurate body fat value should not rely on the estimations provided.
STEP 1: Press PROGRAM button repeatedly, on the “11” time pressing PROGRAM button,
the TIME window will display FAT. Press MODE button to set the relative parameters:
GENDER, AGE, HEIGHT and WEIGHT.
STEP 2: After entering BODY FAT function by pressing MODE button, the INCLINE
window will display F1, the DIST window will display 1, it represents GENDER, press
SPEED +/- button to set gender from 1 - 2, 1 represents MALE, 2 represents FEMALE.
Then press MODE button to go to next step.
STEP 3: After pressing MODE button, the INCLINE window will display F2, the DIST
window will display 25, it represents AGE, press SPEED +/- button to set age from 10-99.
Then press MODE button to go to next step.
STEP 4: After pressing MODE button, the INCLINE window will display F3, the DIST
window will display 170, it represents HEIGHT, press SPEED +/- button to set height from
100CM-200CM. Then press MODE button to go to next step.
STEP 5: After pressing MODE button, the INCLINE window will display F4, the DIST
window will display 70, it represents WEIGHT, press SPEED +/- button to set weight from
20KG-150KG. Then press MODE button to go to next step.
STEP 6: After finished setting all the necessary information of your body condition, press
MODE button again, the INCLINE window will then display F5, the DIST window will
display “----”, it means the computer start to work for calculating, then hold the pulse
sensor on handrail with both of your hands, around 8 seconds after, the body fat result will
be displayed on INCLINE window.
BODY FAT CHART
The result that given by body fat scale can be a reference of body condition, check your
body condition according to the left chart with the result you get from the treadmill.
10
OPERATION GUIDE

BLUETOOTH MUSIC PLAYER
The treadmill have the bluetooth function, then connect the smart phone as follow steps:
STEP1: Turn on the Bluetooth of the smart phone, search the device, and click to
connect the devices when RUN MUSIC appears.
STEP2: After the connection, the voice of smart phone will be played by the speaker on the
console.
BLUETOOTH APP FUNCTION
1.FitShow Download
Scan QR code to download theAPP directly, or download and install over the application stores by
search 'FitShow'.
2.Application Operation
2.1 User register/signup and login
Body condition
Result
Fat
BMI > 30
Overweight
26 < BMI < 30
Fit
19 < BMI < 25
Thin
BMI < 19
11
OPERATION GUIDE

【1】：Generate a verification code to log in directly
【2】：Tap 'More' -> Password Login to input the existing account and password
【3】：Log in as a guest
2.2 Device Connection
Before connecting the device, please make sure the system Bluetooth and GPS(Andoird8.0 and
above required) are ON status. Then go to [Sports - Devices] page, get the devices nearby via
Bluetooth search.
Note:
1. Please do not bind devices by the phone Bluetooth list which will disable theAPP.
2. If the device is powered by battery, please run the device one or two to activate the device then
connect APP.
2.3 Model Selection
12
OPERATION GUIDE

Tap a model【1】to enter the corresponding sports model. And connect the desired device by the
nearby devices list【2】.
2.4 Sports Control
Start the treadmill to enter the sports car table, and control the sports by the【1】control options. The
motion data is generated synchronously after the sports.
2.5 Sports Training
Enter [SPorts - Training] page, make a daily sport plan by the【1】. Once the plan is created, tap【2】
to start the plan.
2.6 Outdoor Sports
13
OPERATION GUIDE

Enter [Sports - OutDoor] page to start a related outdoor sports model.
2.7 Discover
Enter [Discover] page to find more sports, diet, course, and other wonderful content
recommendations.
2.8 My Center
14
4
OPERATION GUIDE

Enter [Mine] page to view the sports data record, edit profile, change system setting, and so o
3. The Third-Party Application
3.1 Kinomap
Search, download, and install Kinomap over the App Store.
【1】Enter Kinomap to select [More] page;
【2】Select to add more fitness equipment;
【3】Select the desired device type;
【4】Tap FitShow entrance;
【5】Tap the matching devices like 'Fs-XXXX' to bind Find related videos to start sports.
【6】Find related videos to start sports
3.2 ZWIFT
15
OPERATION GUIDE

Search, download, and install ZWIFT over the App Store.
【1】Enter ZWIFT to register an account;
【2】Login account to select the paired riding or running equipment;
【3】Pair device successfully, tap OK to start sport;
【4】For riding equipment, start riding directly. For running equipment, need to press the start button to
start running.
16
OPERATION GUIDE

PRESET PROGRAM CHART
P1. WEIGHT LOST
SPEED CHANGES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Level 1
SPEED(KM/H)
1
2
2
3
3
3
4
5
6
6
7
6
5
4
4
3
2
2
Level 2
SPEED(KM/H)
1
2
2
3
4
4
5
6
8
8
10
8
8
5
5
3
2
2
Level 3
SPEED(KM/H)
1
2
3
4
5
5
6
8
9
10
12
10
8
7
6
4
3
2
Level 4
SPEED(KM/H)
1
2
3
4
6
7
8
10
11
12
13
11
10
8
7
5
4
2
Level 5
SPEED(KM/H)
2
3
4
5
7
7
8
10
12
14
14
13
12
10
9
6
4
2
Level 6
SPEED(KM/H)
2
3
4
5
7
9
10
12
13
14
14
13
12
10
9
6
5
3
Level 7
SPEED(KM/H)
2
3
5
6
8
9
10
12
13
14
15
13
12
10
9
6
6
3
Level 8
SPEED(KM/H)
2
3
5
6
8
10
12
14
14
15
15
14
13
11
9
7
6
3
P2. CARDIO TRAIN
SPEED & INCLINE CHANGES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Level 1
ELEVATION
1
1
2
3
4
5
6
7
7
8
8
7
7
5
4
2
1
1
SPEED(KM/H)
1
1
2
2
3
4
5
6
6
7
7
6
6
4
3
2
1
1
Level 2
ELEVATION
1
2
3
4
5
6
7
8
8
9
9
8
8
6
5
3
2
1
SPEED(KM/H)
1
2
2
3
4
5
6
7
7
8
8
7
7
5
4
2
2
1
Level 3
ELEVATION
1
2
4
5
6
7
8
9
9
10
10
9
9
7
6
4
2
1
SPEED(KM/H)
1
2
3
4
5
6
7
8
8
9
9
8
8
6
5
3
2
1
Level 4
ELEVATION
2
3
5
6
7
8
9
10
10
11
11
10
10
8
7
5
3
2
SPEED(KM/H)
2
2
4
5
6
7
8
9
9
10
10
9
9
7
6
4
2
2
Level 5
ELEVATION
2
4
6
7
8
9
10
11
11
12
12
11
11
9
8
6
4
2
SPEED(KM/H)
2
3
5
6
7
8
9
10
10
11
11
10
10
8
7
5
3
2
Level 6
ELEVATION
3
5
7
8
9
10
11
12
12
13
13
12
12
10
9
7
5
3
SPEED(KM/H)
2
4
6
7
8
9
10
11
11
12
12
11
11
9
8
6
4
2
Level 7
ELEVATION
4
6
8
9
10
11
12
13
13
14
14
13
13
11
10
8
6
4
SPEED(KM/H)
3
5
7
8
9
10
11
12
12
13
13
12
12
10
9
7
5
3
Level 8
ELEVATION
5
7
9
10
11
12
13
14
14
15
15
14
14
12
11
9
7
5
SPEED(KM/H)
4
6
8
9
10
11
12
13
13
14
14
13
13
11
10
8
6
4
P4. POWER WALK
SPEED CHANGES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Level 1
SPEED(KM/H)
1
1
2
2
3
3
4
4
4
4
4
4
3
2
2
2
1
1
Level 2
SPEED(KM/H)
1
2
2
2
3
3
4
4
5
4
4
4
3
3
2
2
1
1
Level 3
SPEED(KM/H)
1
2
2
3
3
4
4
5
5
5
4
4
4
3
3
2
1
1
Level 4
SPEED(KM/H)
1
2
3
3
3
4
4
5
6
6
5
4
4
4
3
2
2
1
Level 5
SPEED(KM/H)
1
2
3
4
4
5
5
5
6
6
6
5
4
4
4
3
2
1
Level 6
SPEED(KM/H)
1
2
3
4
5
5
6
6
6
6
6
5
5
4
4
3
2
1
Level 7
SPEED(KM/H)
1
2
3
4
5
6
6
7
7
6
6
6
5
5
4
3
2
1
Level 8
SPEED(KM/H)
1
2
3
4
5
6
7
7
7
7
6
6
6
5
5
4
2
1
17
OPERATION GUIDE

P3. FAT BURN
SPEED & INCLINE CHANGES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Level 1
ELEVATION
1
1
2
2
3
3
4
5
5
5
5
4
4
3
2
2
1
1
SPEED(KM/H)
1
2
3
3
5
6
7
8
8
8
8
7
7
5
4
3
2
1
Level 2
ELEVATION
1
1
2
2
3
4
5
6
6
6
6
5
5
4
3
2
1
1
SPEED(KM/H)
1
2
3
4
6
7
8
9
9
9
9
8
8
6
5
3
2
1
Level 3
ELEVATION
1
1
2
3
4
5
6
7
7
7
7
6
6
4
3
2
1
1
SPEED(KM/H)
1
2
4
5
7
8
9
10
10
10
10
9
9
7
6
4
2
1
Level 4
ELEVATION
1
2
3
4
5
6
7
8
8
8
8
7
7
5
4
3
2
1
SPEED(KM/H)
2
3
5
6
8
9
10
11
11
11
11
10
10
8
7
5
3
2
Level 5
ELEVATION
1
2
3
4
6
7
8
9
9
9
9
8
8
6
5
3
2
1
SPEED(KM/H)
2
4
6
7
9
10
11
12
12
12
12
11
11
9
8
6
4
2
Level 6
ELEVATION
2
3
4
5
7
8
9
10
10
10
10
9
9
7
6
4
3
2
SPEED(KM/H)
3
5
7
8
10
11
12
13
13
13
13
12
12
10
9
7
5
3
Level 7
ELEVATION
2
3
5
6
8
9
10
11
11
11
11
10
10
8
7
5
3
2
SPEED(KM/H)
4
6
8
9
11
12
13
14
14
14
14
13
13
11
10
8
6
4
Level 8
ELEVATION
2
4
6
7
9
10
11
12
12
12
12
11
11
9
8
6
4
2
SPEED(KM/H)
4
7
9
10
12
13
14
15
15
15
15
14
14
12
11
9
7
4
P5. INTERVAL
P6. ROLLING
SPEED CHANGES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Level 1
SPEED(KM/H)
1
2
3
2
1
2
3
2
1
2
3
2
1
2
3
2
1
1
Level 2
SPEED(KM/H)
2
3
4
3
2
3
4
3
2
3
4
3
2
3
4
3
2
2
Level 3
SPEED(KM/H)
2
3
4
5
4
3
4
5
4
3
4
5
4
3
4
5
4
3
Level 4
SPEED(KM/H)
2
4
5
6
5
4
5
6
5
4
5
6
5
4
5
6
5
3
Level 5
SPEED(KM/H)
2
5
6
7
6
5
6
7
6
5
6
7
5
6
7
6
5
3
Level 6
SPEED(KM/H)
3
6
7
8
7
6
7
8
7
6
7
8
7
6
7
8
7
4
Level 7
SPEED(KM/H)
3
7
8
9
8
7
8
9
8
7
8
9
8
7
8
9
8
4
Level 8
SPEED(KM/H)
3
8
9
10
9
8
9
10
9
8
9
10
9
8
9
10
8
4
SPEED CHANGES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Level 1
SPEED(KM/H)
1
2
4
2
4
2
4
2
4
2
4
2
4
2
4
2
4
2
Level 2
SPEED(KM/H)
1
2
5
2
5
2
5
2
5
2
5
2
5
2
5
2
5
2
Level 3
SPEED(KM/H)
1
2
6
2
6
2
6
2
6
2
6
2
6
2
6
2
6
2
Level 4
SPEED(KM/H)
1
3
6
3
6
3
6
3
6
3
6
3
6
3
6
3
6
3
Level 5
SPEED(KM/H)
1
3
7
3
7
3
7
3
7
3
7
3
7
3
7
3
7
3
Level 6
SPEED(KM/H)
2
4
7
4
7
4
7
4
7
4
7
4
7
4
7
4
7
4
Level 7
SPEED(KM/H)
2
4
8
4
8
4
8
4
8
4
8
4
8
4
8
4
8
4
Level 8
SPEED(KM/H)
2
5
8
5
8
5
8
5
8
5
8
5
8
5
8
5
8
5
18
OPERATION GUIDE

P7. MOUNTAIN CLIMB
SPEED & INCLINE CHANGES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Level 1
ELEVATION
0
1
1
2
2
3
3
4
4
5
6
7
8
7
6
4
2
0
SPEED(KM/H)
1
1
2
2
3
3
3
4
4
4
3
3
3
2
2
2
1
1
Level 2
ELEVATION
0
1
2
2
3
3
4
4
5
6
7
8
9
8
6
4
2
0
SPEED(KM/H)
1
1
2
2
3
3
3
4
4
4
3
3
3
2
2
2
1
1
Level 3
ELEVATION
1
1
2
3
3
4
4
5
6
7
8
9
10
9
8
6
4
2
SPEED(KM/H)
1
1
2
2
3
3
3
4
4
4
3
3
3
2
2
2
1
1
Level 4
ELEVATION
1
2
2
3
3
4
5
6
7
8
9
10
11
10
8
7
5
3
SPEED(KM/H)
2
2
3
3
4
4
4
5
5
4
4
4
3
3
3
2
2
2
Level 5
ELEVATION
1
2
3
4
5
6
7
8
9
9
10
11
12
11
10
8
6
4
SPEED(KM/H)
2
2
3
3
4
4
4
5
5
4
4
4
3
3
3
2
2
2
Level 6
ELEVATION
2
2
3
4
5
6
7
8
9
10
11
12
13
12
10
8
6
4
SPEED(KM/H)
2
2
3
3
4
4
4
5
5
4
4
4
3
3
3
2
2
2
Level 7
ELEVATION
2
3
4
5
6
7
8
9
10
11
12
13
14
13
10
8
6
4
SPEED(KM/H)
2
2
4
4
5
5
5
6
6
6
5
5
4
4
4
2
2
2
Level 8
ELEVATION
3
4
5
6
7
8
9
10
11
12
13
14
15
13
10
8
6
4
SPEED(KM/H)
2
2
4
4
5
5
5
6
6
6
5
5
4
4
4
2
2
2
P8. HILL RUN
SPEED & INCLINE CHANGES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Level 1
ELEVATION
0
0
1
1
2
2
2
3
3
3
4
4
5
5
4
3
2
1
SPEED(KM/H)
2
2
2
3
3
3
5
5
7
7
9
9
10
8
8
6
4
2
Level 2
ELEVATION
0
0
1
1
2
2
2
3
3
3
4
4
5
6
5
3
2
1
SPEED(KM/H)
2
2
2
4
4
4
6
6
6
8
8
10
10
8
8
6
4
2
Level 3
ELEVATION
0
0
1
1
2
2
3
3
3
4
4
5
5
6
5
3
2
1
SPEED(KM/H)
2
2
4
4
4
6
6
6
8
8
10
10
12
10
8
6
4
2
Level 4
ELEVATION
0
1
1
2
2
3
3
4
4
4
5
5
6
7
6
5
3
2
SPEED(KM/H)
2
2
4
4
6
6
8
8
8
10
10
10
12
12
10
7
5
3
Level 5
ELEVATION
1
1
2
2
3
3
4
4
5
5
6
6
7
8
7
6
3
2
SPEED(KM/H)
2
4
6
6
6
6
8
8
8
10
10
12
13
12
10
7
5
3
Level 6
ELEVATION
1
2
3
4
4
4
5
5
6
6
7
8
8
8
7
6
3
2
SPEED(KM/H)
2
4
6
6
6
6
8
8
10
10
12
13
13
12
10
7
5
3
Level 7
ELEVATION
1
2
3
4
5
6
6
7
7
8
8
9
10
10
9
6
3
2
SPEED(KM/H)
2
4
6
6
8
8
10
10
12
13
13
14
13
12
10
7
5
3
Level 8
ELEVATION
1
2
3
4
6
6
7
7
8
8
9
9
10
12
9
6
3
2
SPEED(KM/H)
2
4
6
8
10
10
12
12
13
13
14
14
13
12
10
7
5
3
19
OPERATION GUIDE