Oregon Scientific WMR100NA User manual

TEMP & HUMIDITY SENSOR
WIND SENSOR
Unscrew the anemometer part of the Wind
Sensor.
Slide the battery cover and insert two AA
batteries matching the polarities (+/-).
Press the reset button.
1
6
9
10
10
While holding the sun shield, turn the sensor counter-
clockwise
Pull down the sensor
Slide the battery cover off and insert two AAA batteries
matching the polarities (+/-)
Press the reset button
Insert sensor back into heat shield, turn clockwise to
secure
Locate the battery compartment and open the battery door and install
two AA batteries.
2
3
4
5
7
WMR100NA Base
8