Origin Acoustics DSP3-150 User manual
DSP3-150
CAUTION! WARNING!
DO NOT INSTALL THIS SYSTEM UNTIL YOU HAVE SET UP YOUR DSP.
USE THIS MANUAL OR SCAN QR CODE TO CONSULT MANUAL ONLINE.
Please visit docs.originacoustics.com or scan the QR code using your smart device for the
most up to date installation, presets, safety & warranty information.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide bladed
or the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked
on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
M. Unplug this apparatus during lightning
storms or when unused for long
periods of time.
N. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
O. The equipment shall be used at maximum 35o
C/ 95o F ambient temperature. To help maintain
ambient temperature, DO NOT mount in
locations with direct sunlight.
P. To reduce the risk of electrical shock, do not
open the equipment. For safety reasons it is
only allow to the opened by qualified service
personnel.
Q. WARNING: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or
moisture. Additionally, the apparatus shall not
be exposed to dripping or splashing and no
objects filled with liquids shall be placed on the
apparatus.
R. The mains plug is used as the disconnect
device and shall remain readily operable.
S. The product shall be used on open bench.
T. No naked flame sources, such as lighted
candles, should be placed on the apparatus.
U. The apparatus should be connected to a
mains socket outlet with a protective earthing
connection.
V. Ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
W. This apparatus is suitable for use in tropical
climates.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER OR BACK. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO AUTHORIZED
SERVICE PERSONNEL.
CAUTION: WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THE
APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR
SPLASHING. NO OBJECTS FILLED WITH LIQUIDS SHALL
BE PLACED ON THE APPLIANCE.
Table of Contents
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
1
Introduction
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
1
Specifications
*All product specifications are subject to change. Please refer to the dealer portal for the latest information.
MODEL DSP3-150
PART AMPD03X1500
# of Channels
Analog Input
Digital Input
Analog output
Frequency Response
Output Power
THD @
Rated Power 4 ohm
Protection
Dimensions
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
2
What’s Included
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
2
What’s Included
The gauge of wire used can have an impact on the performance of your speakers.
Use a multi-stranded wiring designed for amplifier to speaker connections. Which
gauge to select depends on the length of wire to be used on any particular speaker.
The longer your run is, the larger your wire size must be.
Wire Length Wire Gauge
0 -100’ (0 - 30m) 16
50 - 150’ (15 - 45m) 14
Over 100’ (30m) 12
ManualPower Cable Rack Ears
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
3
About the DSP3-150
Starting Out
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
3
About the DSP3-150
This amplifier is highly flexible with three channels of power. Total wattage
is 600W @ 4Ω, with 150W on the le and right channels and 300W for the
subwoofer channel.
Preloaded with DSP settings for Origin Acoustics loudspeakers, there is optional
soware for creating your own presets. Visit originacoustics.net or speak with
your integrator to download.
Please note that the 300W subwoofer channel uses a summed stereo signal.
Starting Out
The knob of the DSP3-150 Amplifier can both be pressed and turned le and
right. Aer the initial boot-up sequence, the knob can be used to adjust input
volume up or down via rotation, and a single press will enter the main menu
mode.
The LED lights on the front indicate input signals on their respective channels.
The final standby light will be red during sleep mode and blue when the
amplifier is awake.
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
4
Main Menu
Select A DSP Preset
Rotate
Press
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
3
About the DSP3-150
This amplifier is highly flexible with three channels of power. Total wattage
is 600W @ 4Ω, with 150W on the le and right channels and 300W for the
subwoofer channel.
Preloaded with DSP settings for Origin Acoustics loudspeakers, there is optional
soware for creating your own presets. Visit originacoustics.net or speak with
your integrator to download.
Please note that the 300W subwoofer channel uses a summed stereo signal.
Starting Out
The knob of the DSP3-150 Amplifier can both be pressed and turned le and
right. Aer the initial boot-up sequence, the knob can be used to adjust input
volume up or down via rotation, and a single press will enter the main menu
mode.
The LED lights on the front indicate input signals on their respective channels.
The final standby light will be red during sleep mode and blue when the
amplifier is awake.
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
3
About the DSP3-150
This amplifier is highly flexible with three channels of power. Total wattage
is 600W @ 4Ω, with 150W on the le and right channels and 300W for the
subwoofer channel.
Preloaded with DSP settings for Origin Acoustics loudspeakers, there is optional
soware for creating your own presets. Visit originacoustics.net or speak with
your integrator to download.
Please note that the 300W subwoofer channel uses a summed stereo signal.
Starting Out
The knob of the DSP3-150 Amplifier can both be pressed and turned le and
right. Aer the initial boot-up sequence, the knob can be used to adjust input
volume up or down via rotation, and a single press will enter the main menu
mode.
The LED lights on the front indicate input signals on their respective channels.
The final standby light will be red during sleep mode and blue when the
amplifier is awake.
LIST 1 2 3 4 5 6 7 8
DSP
PROFILE
FLAT AS51SYS LSB64 RD 360 LSB64 SQ 360 LSB64 RD 180 LSB64 SQ 180 D39 DSUB6 D59 DSUB6
CAUTION! WARNING!
DO NOT INSTALL THIS SYSTEM UNTIL YOU HAVE SET UP YOUR DSP.
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
5
Adjust Auto-O Timing
Rotate
Press
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
3
About the DSP3-150
This amplifier is highly flexible with three channels of power. Total wattage
is 600W @ 4Ω, with 150W on the le and right channels and 300W for the
subwoofer channel.
Preloaded with DSP settings for Origin Acoustics loudspeakers, there is optional
soware for creating your own presets. Visit originacoustics.net or speak with
your integrator to download.
Please note that the 300W subwoofer channel uses a summed stereo signal.
Starting Out
The knob of the DSP3-150 Amplifier can both be pressed and turned le and
right. Aer the initial boot-up sequence, the knob can be used to adjust input
volume up or down via rotation, and a single press will enter the main menu
mode.
The LED lights on the front indicate input signals on their respective channels.
The final standby light will be red during sleep mode and blue when the
amplifier is awake.
Allow for External Triggers
Rotate
Press
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
3
About the DSP3-150
This amplifier is highly flexible with three channels of power. Total wattage
is 600W @ 4Ω, with 150W on the le and right channels and 300W for the
subwoofer channel.
Preloaded with DSP settings for Origin Acoustics loudspeakers, there is optional
soware for creating your own presets. Visit originacoustics.net or speak with
your integrator to download.
Please note that the 300W subwoofer channel uses a summed stereo signal.
Starting Out
The knob of the DSP3-150 Amplifier can both be pressed and turned le and
right. Aer the initial boot-up sequence, the knob can be used to adjust input
volume up or down via rotation, and a single press will enter the main menu
mode.
The LED lights on the front indicate input signals on their respective channels.
The final standby light will be red during sleep mode and blue when the
amplifier is awake.
Adjust Output Volume
Rotate
Press
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
3
About the DSP3-150
This amplifier is highly flexible with three channels of power. Total wattage
is 600W @ 4Ω, with 150W on the le and right channels and 300W for the
subwoofer channel.
Preloaded with DSP settings for Origin Acoustics loudspeakers, there is optional
soware for creating your own presets. Visit originacoustics.net or speak with
your integrator to download.
Please note that the 300W subwoofer channel uses a summed stereo signal.
Starting Out
The knob of the DSP3-150 Amplifier can both be pressed and turned le and
right. Aer the initial boot-up sequence, the knob can be used to adjust input
volume up or down via rotation, and a single press will enter the main menu
mode.
The LED lights on the front indicate input signals on their respective channels.
The final standby light will be red during sleep mode and blue when the
amplifier is awake.
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
6
Exit Menu
Press
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
3
About the DSP3-150
This amplifier is highly flexible with three channels of power. Total wattage
is 600W @ 4Ω, with 150W on the le and right channels and 300W for the
subwoofer channel.
Preloaded with DSP settings for Origin Acoustics loudspeakers, there is optional
soware for creating your own presets. Visit originacoustics.net or speak with
your integrator to download.
Please note that the 300W subwoofer channel uses a summed stereo signal.
Starting Out
The knob of the DSP3-150 Amplifier can both be pressed and turned le and
right. Aer the initial boot-up sequence, the knob can be used to adjust input
volume up or down via rotation, and a single press will enter the main menu
mode.
The LED lights on the front indicate input signals on their respective channels.
The final standby light will be red during sleep mode and blue when the
amplifier is awake.
View Current Soware Version
Press
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
3
About the DSP3-150
This amplifier is highly flexible with three channels of power. Total wattage
is 600W @ 4Ω, with 150W on the le and right channels and 300W for the
subwoofer channel.
Preloaded with DSP settings for Origin Acoustics loudspeakers, there is optional
soware for creating your own presets. Visit originacoustics.net or speak with
your integrator to download.
Please note that the 300W subwoofer channel uses a summed stereo signal.
Starting Out
The knob of the DSP3-150 Amplifier can both be pressed and turned le and
right. Aer the initial boot-up sequence, the knob can be used to adjust input
volume up or down via rotation, and a single press will enter the main menu
mode.
The LED lights on the front indicate input signals on their respective channels.
The final standby light will be red during sleep mode and blue when the
amplifier is awake.
Switch System Inputs
Rotate
Press
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
3
About the DSP3-150
This amplifier is highly flexible with three channels of power. Total wattage
is 600W @ 4Ω, with 150W on the le and right channels and 300W for the
subwoofer channel.
Preloaded with DSP settings for Origin Acoustics loudspeakers, there is optional
soware for creating your own presets. Visit originacoustics.net or speak with
your integrator to download.
Please note that the 300W subwoofer channel uses a summed stereo signal.
Starting Out
The knob of the DSP3-150 Amplifier can both be pressed and turned le and
right. Aer the initial boot-up sequence, the knob can be used to adjust input
volume up or down via rotation, and a single press will enter the main menu
mode.
The LED lights on the front indicate input signals on their respective channels.
The final standby light will be red during sleep mode and blue when the
amplifier is awake.
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
7
Troubleshooting
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
8
Phone: (844) 674-4461
Hours of operation: 8:00am - 5:00pm (Pacific Time), Mon - Fri
Email: sales@originacoustics.com
Technical Assistance
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
9
2 Year Limited Warranty
Requirements & Warranty Coverage
*All warranties and warranty conditions are subject to change. Please refer to
www.originacoustics.com for the latest information.
DSP3-150 AMPLIFIER INSTALLATION USER MANUAL
10
Not Covered by Warranty
Return Process
Other manuals for DSP3-150
1
Table of contents
