Orion TV22PL145DVD User manual

Before operating the unit, please read this manual thoroughly.
LCD-TV
Operating Instructions
TV22PL145DVD
with integrated DVD/CD-Player and DVB-T- / Analog-Tuner
Model-No.:
51B0346B_ENG.indd 151B0346B_ENG.indd 1 6/13/08 10:07:10 AM6/13/08 10:07:10 AM

2
Thank you for purchasing this unit.
The unit can play back both DVD discs and Audio CDs.
• Use only discs marked with the following.
DVD
[8 cm disc/12 cm disc]
Video CDs/Audio CDs
[8 cm disc/12 cm disc]
Important Warning
CAUTION:
A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT USES A VISIBLE LASER BEAM
WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPER-
ATE THE PLAYER CORRECTLY AS INSTRUCTED.
THE FOLLOWING CAUTION LABEL IS LOCATED ON THE REAR PANEL OF THE UNIT.
WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO
THE OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE
THE RECOMMENDED ACCESSORIES ONLY.
Precautions
Headphone Warning
Loud music can damage your hearing irreversibly, therefore do not set the volume to a high level when
listening through headphones, particularly for extended listening periods.
Battery notice
Look after our environment - contact your local authorities for advice on how to safely dispose of exhausted
batteries.
Information for the DVB-T function
Any function relative to the digital television (with the DVB logo) is available only within the country or area
where such signals are transmitted. Verify with the salesman if it is possible to receive a DVB-T signal in
the zone where you live.
A DVB-T antenna (not supplied) must be connected for DVB-T reception.
Even if the television conforms to the DVB-T specifications, the compatibility to future digital DVB-T
transmissions is not guaranteed.
Some digital television functions may not be available in some countries.
The DVB-T system present in this device is FTA (Free to air).
Waste Disposal Tip
This symbol means that your electrical and electronic equipment should be disposed at the
end of its life separately from your household waste. There are separate collection systems
for recycling in the EU. For more information, please contact the local authority or your retailer
where you purchased the product.
* The “HD ready” Logo is a trademark of EICTA.
* DVB is a registered trademark of the DVB Project. This logo indicates that the product is compliant with
European Digital Broadcasting.
•
•
•
•
•
DIGITAL VIDEO
CLASS 1
LASER PRODUCT
51B0346B_ENG.indd 251B0346B_ENG.indd 2 6/13/08 10:07:12 AM6/13/08 10:07:12 AM

3
Contents
Contents
Precautions........................................................... 2
Features................................................................ 3
Contents ............................................................... 3
Important safety information.................................. 4
Location of controls............................................... 7
Remote Control..................................................... 8
Antenna connection ............................................ 10
Auto setup........................................................... 11
Quick guide for ANALOG MENU operation ........ 12
Selecting the video input source ......................... 12
On-screen Language Selection .......................... 12
Automatic station presetting with the built-in Tuner .. 13
Changing the order of stored channels ............... 13
Manual TV station presetting .............................. 14
Basic Operation .................................................. 15
Teletext ............................................................... 16
Stereo reception with the built-in analogue tuner.. 17
Picture size and resolution .................................. 18
Picture format...................................................... 19
Other convenience functions .............................. 21
Remarks on DVB-T system ................................. 22
Language Setup ................................................. 23
Auto Scan ........................................................... 23
Manual Scan....................................................... 24
Carrier Setup ...................................................... 24
Channel Organizer.............................................. 25
Display Setup...................................................... 27
Password Setup (Parental lock) .......................... 27
Version................................................................ 28
Software Upgrade............................................... 28
Common Interface .............................................. 28
Channel list ......................................................... 29
Channel banner .................................................. 29
Multi audio .......................................................... 30
DVB-Subtitle ....................................................... 30
EPG (Electronic Program Guide) ........................ 31
EPG Timer .......................................................... 32
Disc..................................................................... 33
Playing a disc...................................................... 34
Zooming.............................................................. 37
Locating desired scene....................................... 37
Marking desired scenes...................................... 38
Repeat playback ................................................. 39
A-B Repeat playback .......................................... 39
Changing angles................................................. 40
Title selection...................................................... 40
DVD menu .......................................................... 40
Changing soundtrack languages ........................ 41
Subtitles.............................................................. 41
Disc status .......................................................... 41
MP3/WMA/JPEG and Audio CD operation ......... 42
Program playback............................................... 47
Random playback............................................... 47
Customizing The Function Settings..................... 48
Temporary cancel the rating level by DVD disc ... 52
Language Code List............................................ 53
PC connection .................................................... 54
Connecting an HDMI or a DVI device to the HDMI input .. 55
Connection to other equipment........................... 56
AV colour adjustment .......................................... 59
Troubleshooting table.......................................... 60
Specifications ..................................................... 61
Features
TV
LCD MONITOR
Resolution: 1680 x 1050 pixels
On-Screen Language Display in 13
languages (English, Spanish, German,
French, Italian, Swedish, Dutch, Russian,
Portuguese, Turkish, Greek, Finnish or
Polish)
NICAM/German A2 STEREO Hyperband
cable DVB-T Combi-Tuner
99 analogue plus 1000 DVB-T Channel
position memory
Videotext – Fastext/TOPtext
Remote control
Sleep timer plus EPG-Timer
Wide-aspect-screen
Scart socket
COMPONENT input
S-Video input
Headphone Jack (for mini plug)
PC Connection (VGA) (see page 54)
HDMI-connection
CE Symbol Guaranteeing Compliance to
Currently Effective European Standards
DVD Player
Digital output for Dolby Digital (AC-3) and
DTS
Playback of DVD, VCD, SVCD, MP3/WMA/
JPEG and Audio-CD
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
51B0346B_ENG.indd 351B0346B_ENG.indd 3 6/13/08 10:07:12 AM6/13/08 10:07:12 AM

4
Important safety information
This unit has been produced according to all current safety regulations. The following safety tips should
safeguard users against careless use and the dangers connected with such use.
Although this appliance has been carefully manufactured and rigorously checked prior to leaving the
factory, as with all electrical appliances it is possible for problems to develop. If you notice smoke, an
excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the
mains power socket immediately.
Ensure that the unit is sufficiently ventilated! Never place next to or underneath curtains!
This set should be only be connected to an AC 220~240V / 50Hz mains power supply - do not attempt to
connect it to any other type of supply.
The apparatus must be connected to a main socket outlet with a protective earthing connection.
The socket-outlet must be installed near the equipment and easily accessible.
Any repairs must be carried out by qualified service personnel only.
Do not open this unit. A non-expert attempting to repair the unit could be dangerous and potentially cause
a fire hazard.
Keep away from rodents. Rodents (and also cockatiels) enjoy biting into electric flexes.
The animal can cause a short cut (fire hazard!) and receive a fatal electric shock.
Always hold plug when pulling out plug from power mains supply system. Do not pull on flex. The flex can
become overloaded and cause a short cut.
Never wet clean. Only use a damp cloth, the same as when cleaning furniture.
Do not submerge in or under water!
Set up unit so that no one is able to trip over the flex.
Only use the unit on a stable, shock-free base in order to avoid any danger from falling.
Take note that toddlers can pull the unit down from the table or cupboard by means of its flex. Children
can hurt themselves when doing this.
Do not use the unit near heat sources.The casing and flex could be damaged by the impact of heat.
Watch out for kiddies copying what adults do! Do not stick any objects through the vents!
The vents must remain open! No newspapers or covers should be put on the unit!
The remote control is not a toy! Toddlers could swallow the batteries. If a battery has been swallowed,
please seek out a doctor immediately.
The screen is made of glass and can break if damage is done to it. Be careful when collecting sharp-
edged glass splitters.
You could be hurt or the unit could be damaged.
If the unit is mounted on the wall, contact the shop where you purchased the unit for advice, and leave the
installation work to experts. Incomplete installation work can cause you injuries.
Taking fall-prevention measures
- If these measures are not taken, the unit can fall and you could be injured.
- Contact the shop where you purchased the unit to obtain full details of the measures.
When a TV stand is used,
- Ensure the unit is fully on the stand and placed in the centre.
- Do not leave the stand doors open.
- You could be hurt as a result of the unit falling or breaking, or your fingers being caught or jammed. Take
extra precautions if you have children.
Please pay attention to the following instructions in order to avoid receiving a life-threatening
electric shock:
Protect against moisture. Never use in the bath or sauna.
Never use near a bath, shower or swimming pool.
Never use the unit if it has got wet. This can also mean condensation moisture, which occurs in the winter
when the cold unit is brought into a heated flat. Wait before operating the unit especially after it has been
transported in the winter, until the cold unit has adjusted to the room temperature.
Do not place any heavy objects on the flex. Electrical isolation could be damaged.
Never wrap insulating tape around damaged flexes or on damaged plugs. These should be repaired or
replaced by qualified service personnel.
Never use this unit if the cabinet is defective. Do not make provisional repairs if the cabinet is damaged
- this should be replaced by a new cabinet if necessary.
Unplug the unit from the mains power supply prior to the cleaning of the unit.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
51B0346B_ENG.indd 451B0346B_ENG.indd 4 6/13/08 10:07:12 AM6/13/08 10:07:12 AM

5
Important safety information
OK !
To protect the unit during a thunder storm unplug the AC
power cord and disconnect the antenna. Caution: Do
not touch the antenna connector.
When you leave your home for a long period of time, unplug
the AC power cord for safety reasons.
The unit becomes warm when in operation. Do not place any
covers or blankets on the unit in order to prevent
overheating. The ventilation holes are not to be blocked. Do
not set up near radiators. Do not place in direct sunshine.
Make some space around TV (Correct shelf assembly).
The apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall be
placed on the apparatus.
Liquids spilled into the unit can cause serious damage.
Switch the set OFF and disconnect the mains power supply,
then consult a qualified service person before attempting to
use the unit again.
OK !
Avoid placing the unit on any surfaces that may be subject to
vibrations or shocks.
10cm
10cm
51B0346B_ENG.indd 551B0346B_ENG.indd 5 6/13/08 10:07:12 AM6/13/08 10:07:12 AM

6
Important safety information
Moving the unit or carrying by hand
When the unit is moved a long way, unplug the power cord and disconnect the antenna, con-
necting cables and any fall-prevention apparatus.
• Moving without doing so could result in damage to the power cord, a fire, electric shocks or injuries
from dropping the unit.
When the TV stand has casters, remove caster cups from the stand and push it while support-
ing the unit.
• Ensure that you support the unit when the stand is pushed, as this can cause the unit to fall and you
could be injured.
• The appliance could leave indentations in wooden tables with extremely soft wooden surfaces due to
its heavy weight.
• Furniture polish could corrode and dissolve rubber feet. Black imprints could be visible on the table.
You should therefore only use TV benches, which have been constructed for this
specific purpose.
Secure the casters when the unit is installed on a TV stand with casters.
• The stand can move and you could be hurt if the casters are not secured.
Remove casters when the stand is placed on a soft surface such as a mat and
carpet.
The distance between eyes and the screen should be about 5 ~ 7 times as long
as diagonal length of the screen.
• Viewing from too close a distance can cause strain for your eyes.
When installing the Monitor on a table, be careful not to place the edge of its
stand.
• This may cause the Monitor to fall, causing serious injury to a child or adult, and
serious damage to the Monitor.
Possible Adverse Effects on LCD Screen: If a fixed (non-moving) pattern remains on the LCD screen for
long periods of time, the image can become permanently engrained in the LCD TV panel and cause subtle
but permanent ghost images.This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave
your TV on for long periods of time while it is displaying the following formats or images:
• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
• Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on
a normal (4:3) display (Black bars at top and bottom of screen); or viewing normal style (4:3) media on
a widescreen (16:9) display (Black bars on left and right sides of screen).
Attention!
Cleaning instructions for your LCD TV.
Safety note:
Before you start to clean, switch the set’s power off completely and disconnect the plug from the mains
power supply.
Be careful not to scratch the plastic coated front panel - it is highly vulnerable to accidental scratching (e.g.
by fingernails or other sharp items). (While cleaning, do not wear jewelry) that could cause surface scratch-
ing (such as rings, wrist-watch, etc.). Use a lint-free cloth and pure water to clean with, but make sure the
cloth is thoroughly wrung out so that it is just damp and not soaking wet - also make sure that the cloth is
free from any dirt that could cause scratching to the surface.
Wipe the set clean using minimal pressure.
Do not use standard window cleaning fluid. Its alcohol / ammonia will dissolve the front window’s coating.
Never use solvent or thinner. Never use special cleaners which are designed for cleaning PC Monitors or
CRT TVs. Finally carefully rub dry with a clean dry lint-free cloth.
Do not use paper towels or tissues to clean the set - paper can disintegrate when wet or may leave a trail of
dust behind. Some paper can also be abrasive and scratch your screen.
51B0346B_ENG.indd 651B0346B_ENG.indd 6 6/13/08 10:07:13 AM6/13/08 10:07:13 AM

7
Location of controls
Description of Indicators and Controls
1. Remote sensor
2. (Standby/Timer/On) indicator: The LED indicator lights up red in standby mode, orange in
standby mode when the timer is activated, and green in the power ON mode.
3. Loudspeakers
4. EJECT: Eject a disc.
5. (Volume) +/– buttons / In Menu: Setting.
6. (Channel) /PLAY (
▶ ) button: Press to change to a higher numbered channel set into
memory. DVD mode : Playback. In Menu: Setting. In Standby: Turning on the unit.
7. (Channel) /STOP (■) button: Press to change to a lower numbered channel set into
memory. DVD mode : Stop. In Menu: Setting. In Standby: Turning on the unit.
8. MENU button: To display the menu screen.
9. TV/AV/PC/ENTER button: Select input mode for TV/AV/COMPONENT/HDMI/PC/DVD. In Menu :
Using as ENTER button.
10. (Power)-key: Preparation: Connect power-cable to AC220~240V/50Hz.
a) If standy-LED is red, you may power-off. To power-off, press power-key 1x and release.
For confirmation, standby-LED will change to dark.
b) If standby-LED is off, you may power-on.To power-on, press power-key 1x and release.
For confirmation, standby-LED will change to red and about 1 second later to green.
c) If the TV is currently working, press power-key 1x and release to power-off.
For confirmation, standby-LED will change to dark.
In power-off-condition, the TV’s power-consumption is approx. 1 Watt.
If total disconnection from the mains is required, pls unplug.
Disc slot
4
3
12
5
6
7
8
9
10
51B0346B_ENG.indd 751B0346B_ENG.indd 7 6/13/08 10:07:13 AM6/13/08 10:07:13 AM

8
Remote Control
Function Page
Enter standby mode or turn on the power 11
Display program position number
Teletext time display
15, 29, 41
Select to operate TV/DVD 12, 34
Eject a disc 35
Select channel
Select Teletext page
Enter password
Activate the channel organizer function
15
16
Select an input source 12
Switches between the analogue TV and the digital
TV
12, 23
Display the EPG (Electronic Progr. Guide) 31
Sleep Timer 15
Turn the sound on/off 15
Exit the menu screen
Cancel marking 38
Volume 15
Change the TV channel or Teletext page up or down
In Standby: Turn on the power
15, 16
12
Cursor buttons
Memorize
Teletext page 100
CH LIST
16
15
Call Setup menu
Activate the analogue menu
48
11
Activate the digital menu 23
Switches between the present channel and the last
selected channel 15
Select picture format 19, 20
Toggle between the TV and radio mode 29
Teletext ON / TV+Text / OFF 16
Remove DVD set up menu 48, 52
Select menu of a DVD disc 40
Select title of a DVD disc 40
Display the subtitle 30, 41
Select between the available broadcast audio
Display the multi audio menu
Change sound track language of DVD
17
30
30, 41
Repeat playback between A and B (DVD/CD) 39
Select playback mode 39,47
Locating desired scene 37
Zoom (for DVD playback) 37
Hold the text page
Reverse slow motion
16
36
Change playback angle of a DVD disc
Reveal quiz page answers
40
16
Marking desired scene
Sub page selection
38
16
Teletext enlargement
Forward slow motion
16
36
DVD control buttons 34~36
Fastext/TOPtext buttons
DVD control buttons
16
34~36
51B0346B_ENG.indd 851B0346B_ENG.indd 8 6/13/08 10:07:15 AM6/13/08 10:07:15 AM

9
30 30
Remote Control
Install the batteries
Use batteries type UM3 (AA-Size).
Do not use old or weak batteries. The remote control may not work properly with a weak voltage from such
batteries. Replace exhausted batteries with new ones. Never try to recharge normal batteries - this could
cause an explosion.
Note:
Exhausted batteries can leak corrosive electrolyte, which may cause damage to the remote control -
therefore remove exhausted batteries immediately.
1Open the battery
compartment. 2Install the batteries as shown below, ensuring the correct
polarity.
3Close the battery
compartment.
The remote control handset will not work properly in the following cases:
If bright sunlight directly beams onto the unit front. If an obstacle is placed between the unit and the
handset.
Z
Z
Z
Z
Z
Z
If the batteries have not been installed according to
their polarities.
If the batteries are weak.
Distance of Remote Control Operation
Point the remote control
directly at the remote sensor.
Transmitter window
Maximum distance approx. 5m
Remote sensor
51B0346B_ENG.indd 951B0346B_ENG.indd 9 6/13/08 10:07:21 AM6/13/08 10:07:21 AM

10
Antenna connection
Note: Before you connect other appliances:
To avoid potentially damaging your set, make sure all items are switched off and disconnected from the
mains power when you make the connections.
Arrange the desired connection.
When you have finished making the connections, reconnect the mains power to the unit and switch it
back on.
Connect your antenna as shown below (I/J). Connections to other equipment is explained further on
P.56~58. If you have problems with reception, consult a specialist of antenna.
•
•
•
(A) Power supply: Connect the supplied power cable to an AC 220-240V/50Hz mains power supply only
- do not attempt to connect it to any other type of supply. Never try to repair a damaged AC power cord
with isolation-tape - this should be repaired by a specialist or replaced. Do not let your pet loose near
the cable. Animals biting into the cable could receive a fatal electric shock, and could cause a hazard
to others.
(B) HEADPHONE jack: Plug headphones with a mini plug (3.5 mm) into this jack.
(C) COMPONENT input: See P.58.
(D) AV2 input: Input for analogue A/V-Signal (Composite or S-Video). See P.58.
(E) PC MONITOR input (PC): See P.54.
(F) Scart socket (AV1): For the connection of scart cable. See P.56~58.
(G) PC/HDMI AUDIO input: See P.54, 55.
(H) HDMI input : See P.55.
(I) DVB-T antenna: Connect a DVB-T antenna if DVB-T is already available in your transmission area.
Special versions allow for simultaneous connection of the analogue cable TV network (J). Ask your
specialist retailer.
The built-in combi tuner receives all analogue cable programmes and DVB-T channels.
(K) DVB-T Digital audio output: digital output for CD/DVD & DVB-T (see page 57).
(L) C.I. slot: for DVB-T-PayTV (still no providers at present) (see page 28).
(M) Bracket holes: Fix a wall mounting bracket (not supplied) here.
Back Side
(L)
(M)
(L)
(A) (B) (C) (D) (E) (F) (G) (H)
(I)
(J)
(K)
51B0346B_ENG.indd 1051B0346B_ENG.indd 10 6/13/08 10:07:22 AM6/13/08 10:07:22 AM

11
Auto setup
Your unit has an Automatic
installation which makes installation
in your unit easy. When you turn
on the unit for the first time, the
Automatic installation routine is
activated. Using this routine, you
can select the on-screen language
and automatically search for and
store all the receivable analogue
and digital (DVB) channels.
The Automatic station presetting
feature is for the set’s built-in tuner
only. If you have a device such as
a digital decoder (eg. Satellite or
Digital Terrestrial) connected (see
P.56), you would need to tune it in
separately according to its own
instructions.
Preparation:
Press (Power) on the unit or press (On/Standby) on the
remote.
1AUTO INSTALLATION menu will
appear.
Press or to select LAN-
GUAGE, then press ENTER. Press
or to select desired language.
Then press ENTER.
LANGUAGE
ENGLISH
COUNTRY
UK
AUTO TUNING
AUTO INSTALLATION
ENGLISH
2Press or to select
COUNTRY, then press ENTER.
Press or to select your
country.
Then press ENTER.
LANGUAGE
ENGLISH
COUNTRY
UK
AUTO TUNING
AUTO INSTALLATION
UK
3Press or to select AUTO
TUNING, then press ENTER.
The confirmation screen will be
displayed. Press ENTER to start
automatic tuning.
Your TV will now automatically tune
in all available channels.
Your TV will tune the analogue
channels first, then tune the digital
channels.
Note:
Please be patient - the Auto
Tuning process can take
several minutes to complete.
When the programme on the
screen stops changing and the
sound comes on, the search
process is complete.
•
LANGUAGE
ENGLISH
COUNTRY
UK
AUTO TUNING
AUTO INSTALLATION
10 %
AUTO TUNING
(ANALOGUE)
Auto Scan
TV
Progress
Searching...
Carrier :1
Frequency (kHz) :562000
:003
DVB-T 16QAM
Radio
070 BBC Radio 1
:001
001 BBC ONE
002 BBC TWO
007 BBC THREE
Exit
(DIGITAL)
It is important to enter “DEUTSCH” in Step 1 and
“DEUTSCHLAND” in Step 2 for correct operation of the
appliance in Germany.
The DVB-T tuner arranges the DVB-T channels in an order
customary in the country e.g. 1-ARD, 2-ZDF, etc.
Umlaut vowels in the EPG text are only indicated correctly when
country and language (Deutsch) have been properly set.
•
•
Note:
To cancel the Auto Tuning, press
EXIT during the process.
If on the “AUTO INSTALLATION
(COUNTRY)” screen “UK” is
selected, “Move To” cannot be used
in UK (see page 26).
THE AUTOMATIC TUNING PROCESS
WILL ONLY START BY ITSELF THE
FIRST TIME YOU SWITCH THE SET
ON. HOWEVER YOU CAN RESTART
THIS PROCESS VIA THE MENU
SYSTEM (see page 13 for analogue
channels, and page 23 for digital
channels).
•
•
51B0346B_ENG.indd 1151B0346B_ENG.indd 11 6/13/08 10:07:24 AM6/13/08 10:07:24 AM

12
Quick guide for ANALOG MENU operation/Selecting the
video input source/On-screen Language Selection
Make sure the antenna connection
and power supply are connected
as per the description on previous
page.
Preparations:
Turn on the unit with the (Power)
button on the unit. The (On/Timer/
Standby) indicator will light up in
green.
To change the unit to standby mode,
press on the remote control.
(On/Timer/Standby) indicator will
change from green to red. To turn on
the unit from standby mode, press
on the remote control again.
In standby mode, you can also turn
the unit on with (Channel) /
on the unit or P + / – on the remote
control.
To turn off the unit press (Power)
button on the unit - to completely
switch it off, disconnect the mains
power supply.
•
Quick guide for ANALOG MENU operation
Call ANALOG MENU and for example: Select AUTO
TUNING.
1Press INPUT SELECT.
Select ATV. Press ANALOG MENU.
2Press or to select .
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
3Press or to select AUTO
TUNING, then press ENTER to
enter the AUTO TUNING menu.
... on the following pages the MENU
can be called in the same way as
here.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
4Press EXIT to return to the normal screen.
Selecting the video input source
Press INPUT SELECT to view a signal
from another device connected to your
TV, such as a VCR or DVD player. You
can select each input source depending
on which input jacks you used to connect
your devices.
To select the video input source, press
/. Then press ENTER within 6 seconds.
On-screen Language Selection
1Select LANGUAGE (unless you
have already selected when the set
was first switched on).
Then press ENTER.
ENGLISH
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
2Press or to select the desired language.
3Press EXIT to return to the normal screen.
Note:
If no buttons are pressed for more
than approx. 60 seconds, the MENU
disappears automatically.
•
ATV
AV1
DTV
AV2
COMPONENT
HDMI
INPUT SELECT
51B0346B_ENG.indd 1251B0346B_ENG.indd 12 6/13/08 10:07:25 AM6/13/08 10:07:25 AM

13
Automatic station presetting with the built-in Tuner/
Changing the order of stored channels
Automatic station presetting with the built-in Tuner
Perform this feature to search for and store new analogue TV
programmes after the Automatic installation. (P.11)
Preparation:
Make sure your antenna is connected to the antenna input (see
P.10). Select ATV (see P.12). Then press ANALOG MENU.
1Select AUTO TUNING, then press
ENTER.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
2Select COUNTRY, then press ENTER.
Press or to select your country,
then press ENTER.
COUNTRY
START
UK
UK
3Select START. Then press ENTER.
The automatic tuning will search for available broadcasts
and should store the channels in the correct order. During
the search the sound is muted. When all programs have
been stored, the normal TV screen will appear.
Changing the order of stored channels
The Automatic station presetting stores the stations in a specific
order. However, this order can be changed if you wish.
1Select CH ALLOCATION.
Then press ENTER.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
2Select desired option, then press
ENTER.
SORT
ERASE PROGRAM
SKIP
CH LABEL
3After setting the each option, press ANALOG MENU to
return to CH ALLOCATION memu.
4Press EXIT to return to the normal screen.
Description about the each setting option:
SORT: Press or to select the channel that you want to
move, then press ENTER.
Press or to select the position that you want to move the
channel to, then press ENTER.
ERASE PROGRAM: Press or to select the channel that
you want to erase, then press ENTER.
SKIP: Press or to select the channel that you want to
skip, then press ENTER. mark will appear.
CH LABEL: Press or to select channel that you want
to rename, then press ENTER. Press or to select
character, then press or . The cursor will move to the next
position. Press ENTER to set the channel label.
Note:
To restart digital auto tuning, see
page 23.
When the COUNTRY is set to UK,
the automatic tuning will search for
UHF broad-casts only.
When changing the order of the
channels, it is best to start with Ch1.
•
•
•
51B0346B_ENG.indd 1351B0346B_ENG.indd 13 6/13/08 10:07:26 AM6/13/08 10:07:26 AM

14
1Preparation: connect analog rf-cable-supply. Select ATV
(see page 12). Select memory-cell 2. Press key 2(see page
15). OSD will indicate 2in right upper corner. Eventually
recently stored TV-channel’s name might also appear.
2Press ANALOG MENU. Press
or to select tool-page (see here).
Press or to select MANUAL
TUNING.
Press ENTER.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
3COLOUR SYSTEM and SOUND
SYSTEM has already been preset
to AUTO.
Do not touch.
AUTO
SEARCH
FINE 168.30MHz
COLOUR SYSTEM
AUTO
AUTO
SOUND SYSTEM
VOX 168.30MHz
4Press or to select SEARCH.
Press ENTER. Press or -key,
to start tuning. Tuning will stop
automatically at next available
station. If this does not happen to be
the ZDF, press or -key again to
continue tuning for the ZDF.
Then press ENTER.
SEARCH
FINE 168.30MHz
COLOUR SYSTEM
AUTO
SOUND SYSTEM
AUTO
ZDF 175.30MHz
5If you like use fine-tuning. Select
FINE and press ENTER. Press
or , to fine tune. See the note on
this page.
ZDF 175.30MHz
SEARCH
FINE 175.30MHz
COLOUR SYSTEM
AUTO
AUTO
SOUND SYSTEM
6To store other stations in additional memory-cells, repeat
steps 1 to 5.
7Press EXIT to return to the normal screen.
Manual TV station presetting
If you like, you may manually tune a certain station into a selected memory-cell, without deleting
or modifying other memory-cell’s contents. Example: Store the ZDF into memory-cell 2.
Note:
Usually fine tuning is not necessary,
due to tuning’s automatically
stopping at the very best position. If
you fine-tune anyway, proper working
of teletext-reception with built-in
tuner is no longer guaranteed.
•
51B0346B_ENG.indd 1451B0346B_ENG.indd 14 6/13/08 10:07:27 AM6/13/08 10:07:27 AM

15
Basic Operation
Note:
If the built-in tuner does not receive
anything (e.g. if no antenna is
connected) during TV-operation, then
the TV-unit will change to standby
after approx. 15 minutes.
•
Channel selection
With the numbered buttons.
Example:
No. 2: Press 0and within 2 seconds, press 2.
No. 29: Press 2and within 2 seconds, press 9.
Press P + or –to change up or down a channel. This
takes approx. 2 seconds. If the auto search only
stored 5 stations, only these 5 will appear. Skipped
channels will not appear (see P.13).
•
•
CH LIST
The CH LIST shows a list of all receivable
programmes. They are located in channels 1 to 99.
Press CH LIST to display the CH LIST.
Press or to select the desired channel.
Press CH LIST to display the selected channel.
Press EXIT to exit.
QuickView
button allows you to go back to the last selected channel.
Volume adjusting
Press + or – to adjust the volume. The volume level indicator
disappears after 4 seconds.
MUTE
Press . The sound will be cut off. MUTE will appear for
approx. 4 seconds.
The muting can be released by pressing again or +or –.
Information display
In the analogue TV mode:
Press . Channel number
and picture size setting
will appear for approx. 4
seconds.
In the digital TV mode:
Press . The program
information will appear (see
‘Channel banner’ on page
29).
SLEEP TIMER
To set the sleep timer press . SLEEP and the minutes until
shut-off will appear. Each time you press the SLEEP time
shown will change. When the displayed time runs out, the unit
will switch to standby. The display will disappear after approx. 4
seconds
To cancel the sleep timer:
Press repeatedly until ‘0’ appears.
STEREO 1
ARD
AUTO
51B0346B_ENG.indd 1551B0346B_ENG.indd 15 6/13/08 10:07:28 AM6/13/08 10:07:28 AM

16
Teletext
Teletext is sent page by page. This unit is able to automatically store up to 256 pages, but they can only be
accessed once they have been stored. This can take a few moments.
Fastext/TOPtext
The Fastext/TOPtext is teletext with a special
directory.
On the lower part of the screen there are four
different coloured fields (red, green, yellow and
blue). These fields lead directly to the pages
shown within.The coloured buttons on the remote
control correspond to the coloured fields. Press the
appropriate coloured button in order to activate the
desired colour field.
Switch on / off Teletext
Teletext is not transmitted by all channels.
Select a channel that shows teletext.
Press .You will now see a teletext page. (If
“100” is shown without any text information, it may
mean that the channel you have selected does not
support teletext.)
Press again. The TV-screen will be split into two
and both Teletext information and actual broadcast
will be displayed at the same time.
Press again in order to switch off teletext.
Press again in order to switch on teletext again.
The last page which was stored is now shown.
TELETEXT
TELETEXT
Note:
You cannot select any other channels as long as
teletext is switched on. Switch teletext off when
you want to switch over to another channel.
Select Page
Press P+or –until the page you desire appears. Or
... enter the requested page number by using the 10
Number Buttons.
And if you mistype something, just enter the com-
plete 3-digit wrong page number then enter the de-
sired number again. Or ... press one of the coloured
teletext buttons so that a page from Fastext/TOPtext
is shown.
•
Hold Pages
Some pages are divided up into subpages by the
channel.
Subpages are automatically shown in turn, as they
are transmitted. In order to hold the page, press .
Press again in order to display the next subpage.
Directly Select Subpages
You can directly select the subpages if required.
Example:
Page 128 from ARD (German teletext) comprises
of 2 subpages. In the right upper corner you will, for
example, see 1/2.That means that page one of 2
subpages is being shown at the moment.
128 128 ARD-Text 21.07.03 15:01:38
1/2
Press in order to select subpage 2. 4 dashes
(----) are shown. Enter 0 0 0 2. It can take a minute
before subpage 0002 appears.
Press again in order to switch off the subpage
feature.
You can only select other teletext pages when the
subpage feature is switched off.
Enlargement
In order to enlarge the display, press .
Either the upper or lower half of the screen is
enlarged.
Each time you press you switch between the
display of the upper or lower half of the screen or
the full picture.
Answering Quiz Questions
Some pages contain quiz questions with concealed
answers.
Press in order to show the answers.
Page 100
Press ENTER in order to show page 100.
51B0346B_ENG.indd 1651B0346B_ENG.indd 16 6/13/08 10:07:29 AM6/13/08 10:07:29 AM

17
Stereo reception with the built-in analogue tuner
The built-in Tuner can detect and
receive NICAM stereo broadcasts
automatically.
Note:
In case of bad reception, the stereo
sound also can be disturbed.
•
NICAM stereo sound reception:
1Select NICAM, then press ENTER.
Press or to select AUTO or
OFF.
Select OFF if you do not want to
receive NICAM sound.
NICAM AUTO
BASS 25
TREBLE 25
BALANCE 0
HDMI AUDIO HDMI
RESET
AUTO
2Press EXIT to return to the normal screen.
The following types of broadcast are possible with
NICAM transmissions
‘NICAM ST’ illuminates for approx.
4 seconds when a NICAM STEREO
broadcast signal is received.
‘NICAM M1’ illuminates for approx.
4 seconds when a NICAM MONO A
broadcast signal is received.
‘NICAM M1/M2’ illuminates for
approx. 4 seconds when a NICAM
MONO A and MONO B broadcast
signal is received.
This will be displayed for approx.
4 seconds if a NICAM signal is
received when the ‘NICAM OFF’
option is selected.
Stereo reception in Germany
‘STEREO’ illuminates for approx. 4
seconds when a STEREO broadcast
signal is received.
When 2-channel sound reception is available, you can
select your preferred audio with the AUDIO button.
Each time you press AUDIO, the sound channel will switch to
the alternative channel available.
NICAM 2-channel sound reception (not available in
Germany)
NICAM M1/M2 NICAM M1/M2
2-channel sound reception in Germany
SOUND 1 / 2 SOUND 1 / 2
NICAM M1
NICAM OFF
NICAM M1 / M2
NICAM ST
STEREO
51B0346B_ENG.indd 1751B0346B_ENG.indd 17 6/13/08 10:07:29 AM6/13/08 10:07:29 AM

18
Picture size and resolution
Resolution and picture quality
Broadcast wide screen films in different resolutions. The following table shows the resolution options for
wide screen film broadcast media.
Broadcast media
Resolution of the wide
screen signal
Analogue
cable TV
Digital
cable TV
DVB-T Satellite
(DVB-S)
DVD HDTV
Satellite
(DVB-S2)
BlueRay-
Disc
432i x 704 (Letterbox) Yes Yes Yes Yes Yes Yes No
576i x 704 (anamorphic) No Yes Yes Yes Yes Yes No
720 x 1280 (HD) No No No No No Yes Yes
1080i x 1920 (HD) No No No No No Yes Yes
Best image quality results when the inputted resolution received corresponds approximately with the
resolution of the respectively used TV appliance. The TV22PL145DVD has a resolution of 1050x1680, its
picture format therefore corresponds with approx. 16:10. As a result best image quality results with a picture
signal of 1080ix1920.
Resolutions of 720x1280 and 576ix704 also result in good, sharp images.
The low resolution of analogue cable TV is not recommendable for HDready appliances resulting in poorest
visual image quality. Analogue cable TV is however completely sufficient for analogue tube TV appliances.
Picture quality and black bars
Wide screen films come in different formats. The format is the relationship
between the width and height of the picture. For example, with a 16:9 film
the width to height ratio is 16:9 or 1.78:1. Only 16:9 films can fill a HD-
ready screen without black bars. Therefore, black bars are always visible
when a format other than 16:9 is received. E.g. 4:3, A 4:3 displays vertical
black bars to the right and left.
If a 4:3 picture is increased to 16:9 format then it either appears distorted
(see illustration) or some parts of the picture are cropped off at the top and
the bottom. This is completely normal and is not a fault in the wide screen
TV.
The resolution of the film being received is often lower than the resolution
of the TV set. The film must therefore be expanded after being received in
order to completely fill the screen. Letterbox films (432x704) are increased
until the screen is fully filled. The ends are cropped off slightly. This is
normal with 16:10 screens and no fault or manufacturing error of this TV
appliance.
Super Cinemascope films are wider than 16:9 films.They are in the format
2.4:1 or 22:9, for example. This is clearly wider than16:9.Therefore, Super
Cinemascope films display black bars at the top and bottom on any HD-
ready TV set. The TV22PL145DVD cannot remove the black bars from
Super Cinemascope films.
Picture format and resolution
There is no connection between the picture format and the resolution received. For example, the Super
Cinemascope format can be received in all resolutions, even in the HD resolution1080ix1920. For HDTV
reception too an HD-ready set may display black bars at the top and bottom.
4:3 picture 1:1 on
16:9 screen
4:3 picture zoomed on
16:9 screen
Letterbox picture 1:1 on
16:9 screen
Letterbox picture zoomed
to the maximum on the
screen of the
TV22PL145DVD
51B0346B_ENG.indd 1851B0346B_ENG.indd 18 6/13/08 10:07:30 AM6/13/08 10:07:30 AM

19
Picture format
Picture Size
The required picture format can be set by pressing the PICTURE SIZE button. Press PICTURE SIZE until the
required format is displayed.
Tip: The picture goes dark for a short time every time the button is pressed before appearing in the required
format.
You move through the following formats when you press the button:AUTO, 4:3, FULL SCREEN, 16:9, CINEMA,
14:9.
AUTO
The picture is automatically only then shown in a format-filling display when a WSS-TV signal is received.
Example:
If the analogue tuner receives a letterbox image with WSS signal then
the resulting image looks like this:
WSS:
Public broadcasters include 16:9 identification, the WSS signal (WideScreenSignalling), during transmission
in order to ensure automatic conversion to 16:9.
Most private broadcasters do not transmit a WSS signal. Their 16:9 films are always broadcast in letterbox
format. AUTOmatic does not recognise anything without WSS signal and does not automatically alter the
picture size. Use the PICTURE SIZE button to set the required picture size for private channels.
If AUTO is set then the built-in tuner checks whether the WSS signal is present after every switch-over to
another programme.
If the WSS signal is rediscovered the screen goes intermittently black.
The picture can also go black during adverts when adverts are transmitted in both 4:3 and 16:9 .
Switch off AUTOmatic if you are bothered by the intermittent darkness of the picture. Switch off AUTOmatic
by pressing the PICTURE SIZE button until the required format appears, e.g. 16:9.
illustration 1:
Letterbox image is increased
51B0346B_ENG.indd 1951B0346B_ENG.indd 19 6/13/08 10:07:31 AM6/13/08 10:07:31 AM

20
Picture format
Other formats
Press PICTURE SIZE until the desired size is reached.
4:3
The picture is displayed in 4:3 format
with black bars to the right and left.
Full Screen
Use this format if required.
16:9
The width of the picture will be
zoomed evenly.
16:9 is particularly suitable for
DVD players, DVB-T, DVB-
C and satellite receivers, which can transmit and show 16:9
feature films without black bars. In the set-up menu of the set,
adjust it to show that a 16:9 TV set is connected.
CINEMA
Use CINEMA to increase a small 4:3 letterbox signal. How
do you recognise whether the broadcasting station / the set
operating is using a 4:3 letterbox signal that is too low? Press
the PICTURE SIZE button on the remote control until the 4:3
format appears. If the picture is surrounded by a black border
as in the illustration, this is a 4:3 letterbox signal. Limited by the
broadcasting station / the set operating, this signal is much too
low for a 16:9 HD-ready screen. CINEMA increases this picture
that is too small as far as possible. Natural visible poor focus
emerges, rather as if a postcard were being increased to poster
size. This unfocused appearance is conditioned by input signals
that are too low and is in no way a production fault in this TV set.
4:3 Letterbox picture increased to CINEMA format.
14:9
The picture is increased somewhat but not up to the full screen
width. Black bars remain on the right and left and also at the top
and bottom.
Note:
The picture size cannot be adjusted
in PC operation.
For 720p and 1080i signals the
PICTURE SIZE button does not work.
External receivers can automatically
adjust the picture size via a SCART
cable. Please read the instructions
for the external receiver.
•
•
•
51B0346B_ENG.indd 2051B0346B_ENG.indd 20 6/13/08 10:07:31 AM6/13/08 10:07:31 AM