OrionPC G03-JC620EN-F User manual

i
User’s Manual
G03-JC620EN-F
Manual revision: 1.0
Release Date：September, 2011

ii
User’s Notice
Copyright of this manual belongs to the manufacturer. No part of this manual, including the products
and software described in it may be reproduced, transmitted or translated into any language in any
form or by any means without written permission of the manufacturer.
This manual contains all information required for the utilization of this product to meet the user’s
requirements. But it will change, correct at any time without notice. Manufacturer provides this manual
“as is” without warranty of any kind, and will not be liable for any indirect, special, incidental or
consequential damages (including damages for loss of profit, loss of business, loss of use of data,
interruption of business and the like).
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and they are used only for identification or explanation and to
the owner’s benefit, without intent to infringe.
Package Contents

iii
Safety Instruction
Operate the product according to the correct installation steps and with great care to make sure
safety and comfort using experience. Please refer to the following safety instruction guide to avoid
danger of electric shock or fire. Abide by the previous safety instruction guide to use and maintain
the product and the hard disk to make sure of safe operating environment.
Please follow the instruction manual for operation guide.
The appropriate operating temperature ranges from 0 °C–35 °C (32 °F–95 °F)
The operation humidity for this product is 5% to 80% RH.
To avoid high temperature, please DO NOT overload the maximum power of the external power
supply while the system is consuming high voltage. Be aware of the maximum temperature
allowance of the power supply.
See to it that the product is not working near the water.
Always unplug power cable and other hardware cables from the system before cleaning.
Apply only dry cloth for cleansing the product.
Make sure that there is no heat source nearby when the product is working.
Make sure that the thermal louver of the product is not blocked.
Make sure to remove the power plug from the product when there is a thunder storm.
Please remove the power plug from the product when you are not going to use the product for a
long time.
Make sure to set up or use the product on a stable surface.
Make sure not to drop the product or strike it by any means.
Make sure not to move the product when the power is on.
Make sure not to step on the power cables and other cables or rest anything in them..
Please contact qualified technician for maintenance or repair.
Use only accessories and parts that are made by the qualified manufacturer.

iv
USER’S NOTICE .......................................................................................................................ii
PACKAGE CONTENTS ............................................................................................................ii
SAFETY INSTRUCTION ...........................................................................................................iii
CHAPTER 1 BRIEF INTRODUCTION
1-1 PRODUCT FEATURES...............................................................................................1
1-2 SPECIFICATION.........................................................................................................4
1-3 PRODUCT DIAGRAM.................................................................................................5
CHAPTER 2 HARDWARE INSTALLATION
2-1 TO OPEN THE CHASSIS ...........................................................................................6
2-2 TO INSTALL MEMORY MODULE(S).........................................................................7
2-3 TO INSTALL HARD DISK DRIVE ..............................................................................8
2-4 TO INSTALL WIFI CARD............................................................................................10
2-5 TO INSTALL TV CARD...............................................................................................12
2-6 TO RESTORE REMOVABLE CHASSIS COVER ......................................................14
2-7 TO ASSEMBLE THE STAND.....................................................................................15
2-8 TO VESA MOUNT THE SYSTEM...............................................................................16
CHAPTER 3 I/O CONNECTION AND REMOTE CONTROL
3-1 REAR PANEL CONNECTION....................................................................................18
3-2 FRONT PANEL CONNECTION..................................................................................24
3-3 REMOTE CONTRL DIAGRAM...................................................................................25
3-4 FUNCTION DESCRIPTION OF THE REMOTE CONTROL.......................................26
CHAPTER 4 NEW VISION USER INTERFACE
4-1 TO INSTALL NEW VISION USER INTERFACE ...........................................................29
4-2 TO ACTIVATE NEW VISION PROGRAM .....................................................................32
4-3 NEW VISION USER INTERFACE BASIC OPERATIONS ............................................33
APPENDIX............................................................................................................................52
TABLE OF CONTENT

1
Chapter 1 Brief Introduction
1.1 Product Features
Thank you for purchasing the system, a new product developed, designed and manufactured under
leading technical power and consistent dedication to fine workmanship. The system provides you
HTPC enjoyment and stunning game-playing experience. It can also serves as home server for
data gather with its expandable Wi-Fi function.
This product has functions of general barebone systems, also a powerful system with competitively
advantage in:
HTPC Experience:
The system has both DVI and HDMI connector, supports optical SPDIF W/192KHz Audio output
and true 1080P high resolution video playback which ensures you brilliant video playback without
lag at the same time CPU usage rate is pretty low.
Game-Playing:
The system supports most online games and PC games with smooth playback better than that of
most average configured personal computer available on current market while CPU usage rate is
much lower.
Home Server:
The system can work as WiFi home server in the family with WiFi antenna attached. With this WiFi
network, computer in different rooms of the house can easily realize data sharing. You can easily
access to the downloaded HD movies stored in the HDD of the system, or watching other shared
videos stored in your PC via this function on high definition screen.

2
The system has the following features besides other basic functions:
HDMI: The system comes with an HDMI output connector to realize full HD1080P high-definition
multimedia home theatre enjoyment. User can enjoy seamless playback of HD DVD and Blu-ray
disk in the living room by connecting system to LCD TV set with an HDMI cable for
non-compressed, full digital audio and video movie transmission.
SPDIF W/192KHz Audio output: The system supports optical SPDIF OUT 192KHz/24bit, auto
detecting peripheral devices and multi-streaming technology that transferring audio signals in
different directions. With this function you can enjoy playing games with multi-channel audio effect
on and talking to your friend with a microphone at the same time. It makes you feel that you were
right on the scene when you are watching HD movies with its multi-channel Hi-visual dramatic
audio output. All these thrilling functions can be realized with the system.
WiFi: the Mini PCI-E onboard socket in the board is integrated a with a WiFi card(802.11 b/g/n)
that can act as a mini wireless modem when external antennas are connected. Different

3
computers in the house can build wireless connections through the Mini TOP system and take
necessary data from it, thus reducing the complexity in network establishment.
Giga LAN: The system is integrated with Gigabit LAN network controller with ACPI management
realizing efficient power management for the operating system.
USB2.0: The system supports USB 2.0 function compatible for both USB 2.0 devices and USB 1.1
interface devices. Users can enjoy high speed data transmission rate up to 480Mb/s. Users can
also connect USB 2.0 storage device to the system to create a data bank for storage of download
movies.
USB3.0: The system comes with USB 3.0 port for USB 3.0 function. User can experience fast data
transfers at 5Gb/s with the latest connectivity standard.
MMC/SD/MS 3 in 1 card reader: Users can easily insert the MMC/SD/MS card to the front panel 3
in 1 card reader to view the photos taken or video recorded. User can watch them through LCD TV
screen and make certain edition when it is shown. With a LCD TV you can realize better picture
quality for the video and photos.
CPU Usage: The CPU Usage diagram shows a beautiful data curve that indicate a pretty low CPU
usage percentage for 1080p HD video playback when running the system with a 24’’ LCD monitor
to play files of different formats, GPU performances are excellent as well.
dB Value: The design of the system takes into consideration the needed quiet operating
environment in the living room and the average dB value is below 26 under normal operation to
ensure the tranquility when you are absorbed in film watching.
Remote Control (Optional): The remote control makes it possible for users to power on/off and
switch from different functions with ease.

4
1.2 Specification
APU
AMD Fusion E350 Dual core APU
CPU Clock Speed: 1.6GHz
Radeon™ Brand : HD 6310 ( 492MHz )
Chipset AMD Hudson M1 Chipset
Memory Slots 2 * SO-DIMM DDRIII Memory slots support 2 * SO-DIMM DDRIII 800/1066
memory modules up to 8GB
Network Integrated with Realtek Gigabit LAN chip
Mini-PCIE slot support 802.11b/g/n Wi-Fi card
BIOS AMI 16MB flash ROM
Product Size 205(W)*185(D)*30(H)mm
Front I/O port
1 * Power button/ power LED
1 * MIC connector and 1*Line-out/ Optical S/PDIF-out shared connector
2 * USB 2.0 ports
1 * card reader(SDC/MMC/MS)
Rear I/O port
1* Wi-Fi Antenna connector
1* HDMI + 1* DVI-I port
1 * E-SATA/USB 2.0 shared port
1 * RJ-45 LAN port
1 * USB 3.0 port
1 * 12V DC-in power connector
1 x TV tuner antenna hole
Power Supply 12V DC-in power supply
Standard Accessories
1 * 60W AC-DC Adapter
1 * power cord
1 * DVI-I to VGA convert adapter
1* stand and 1 * VESA mount bracket
WIFI antenna
Optional Accessories 1 * remote control
Certificate
CE,FCC for barebone
CE,FCC,TUV,UL,CCC,CB for power adapter
Comply with Eup standards
Notice: The following diagrams and photos in the manual server as instruction purpose only and
may differ from actual product. Please refer to the product you purchase for actual specification.

5
1-3 Product Diagram
Card Reader Slot
Front Panel I/O Rear Panel I/O
Remote Sensor
Powe
r
Switch
Button
MIC
Line-out
/Optical SPDIF-out
USB 2.0 Ports
Wi-Fi Antenna
Connector
HDMI Port
DVI-I Port
E-SATA /USB Port
RJ-45 Port
USB 3.0 Port
12V DC-in Jack
TV Tuner
Antenna Hole

6
Chapter 2 Hardware Installation
WARNING! Please turn off the system and make sure that power cord is unplugged before
hardware installation to ensure safety.
2.1 To Open the Chassis
1. Place the system on a flat surface and put the
side with removable cover upwards. Put
down the front panel I/O shield.
2. Push the removable panel in the direction
towards the back panel. You can easily open
the chassis in this way.

7
2.2 To Install Memory Module(s)
1. Locate the SO-DIMM memory slot(s) on the board.
3. Insert the gold-figure side of the compatible
DDRIII SO-DIMM into the slot at a 30
degree.
4. Press down as the photo shows. The eject
tabs will lock it if installed correctly.

8
Notice:
zWhen installing, align the notch on the module matches the break on the slot. Memory module
can only be installed in such a direction. If not, it will cause serious damage to module and the
board.
zWhen you install memory module fully into the DIMM socket the eject tab should be locked into
the module very firmly and fit into its indention on both sides.
2.3 To Install Hard Disk Drive
1. Locate HDD connector on the motherboard
as the photo shows.
2. The SATA hard disk and the hard disk racks
(see to it that the marked screw holes on
rack and the corresponding holes on both
edges of HDD).

9
3. Lock the SATA hard disk to one of the racks
by tightening the screws in the marked
position.
4. Lock the SATA hard disk to the other rack by
tightening the screws in the marked position.
5. Fit the hard disk into HDD connector on the
motherboard in this direction.
6. Lock the racks to the board by tightening up
the screws in the marked position with a
screwdriver.

10
2.4 To Install WIFI Card
1. Remove the marked screws to unlock the
board from the chassis.
2. Gently pick the board out of the chassis.
3. Turn the backside of the board upwards and
locate Mini-PCIE WI-FI card slot
(MIMIPCIE1).
4. Insert the gold figure side of the compatible
Mini-PCIE WI-FI card into the Mini-PCI-E slot
by a 45 angle.

11
5. Tighten up the screw to make sure that the
card locked to the board.
6. Press the metal hat on the other end of the
antenna connector into the antenna slot
(ANT1) on card as shown.
*The above steps completed, please restore the board to chassis and close the chassis with the
removable cover (refer to 2.6).
7. Locate the RF slot for WIFI antenna
connector in the rear panel.
8. Connect the external WIFI receiver to the
antenna connector on the rear panel.

12
2.5 To Install TV Card
*The system also support TV card function. TV card slot is located near WIFI card slot. User also
needs to open the chassis and find the TV card slot before installation (please refer to 2.4).
1. Remove the TV antenna hole block net from
the chassis.
2. Push the antenna connector into TV antenna
hole and tighten one hexagonal bolt onto the
antenna connector to lock it to the chassis.
3. Push the antenna string into the reserved
hole of the board.
4. Turn the backside of the board upwards and
locate Mini-PCIE TV card slot (MIMIPCIE2).

13
5. Insert the gold figure side of the compatible
Mini-PCIE TV card into the MIMIPCIE2 slot
by a 45 angle.
6. Tighten up the screw to make sure that the
card locked to the board.
7. Press the metal hat on the other end of the
antenna connector into the antenna slot on
card as shown.
8. Gently fit the board into its original place.
*The above steps completed, please restore the board to chassis and close the chassis with the
removable cover (refer to 2.6).

14
2.6 To Restore Removable Chassis Cover
1. Gently put the removable cover back to
the chassis
2. This edge with 3 plastic equidistant notches
should be parallel to edge of the chassis’ back
panel.
3. Place the removable cover upon the chassis. See to it that the left and right edges of the cover
should be parallel to those of the chassis and there should be a distance of about 1 cm left
between the front edge and the front panel of the chassis as the photo shows.
Front Panel
Back Panel

15
2.7 To Assemble the Stand
1. See to it that the marked square space
fitted into the square notch on the chassis.
2. See to it that the marked tiny round space and
the screw hole in on the chassis are in the
same place.
4. Put the side of I/O back panel towards you and push the removable cover of the chassis in the
direction forwards.

1
6
3. Lock the stand to the chassis by tightening up a
screw to the marked place.
4. The photo of the system with stand
installed.
2.8 To VESA Mount the System
1. Attach the chassis rack to the back of monitor by
tightening up the screws in the marked position.
2. See to it that the square notch on the
chassis is fitted into the marked square
space on the stand and marked notch
on the back panel of the chassis fitted
in the round space of the VESA mount
rack.