Osenous G Series User manual

WIFI TRAIL CAMERA
USER MANUAL
*Please read this guide carefully before use and keep it well for future reference.
www.osenous.com

5
6
7
8
9
10
11
12
2
3
4
1
Camera View(G Series)
1. Strap hole
2. Lock hole
3. Fixing nut
4. DC interface
5. Lens
6. Infrared light
7. PIR indi ca t o r
8. WIFI Indicator
9. Microphone
10. PIR & sensor
11. Fixed button
12. PIR & sensor
13. LCD
14. SHOT button
15. Right button
16. Up button
17. M E N U bu t to n
18. Left button(WiFi: ON/OFF)
19. REPL AY button
20. Down button
Menu Overview（Default parameters）
CODE
1
2
3
4
5
6
7
8
9
10
11
MENU
Mode
PIR Interval
PIR Level
Capture Num
Video Length
Video Size
IR distance
Language
MoSet Clockde
Stamp
Photo Size
Photo / Video / Photo+video
The time interval between each trigger shooting
Middle / Low / High
1 / 2 / 3 (Continuous photo taking）
3 seconds - 10 minutes
3840x2160P；2688x1520P；1920x1080P；1280x720P
Auto / Near / Middle / Far
English, Deutsch, Francais, Italiano,日本語...
YY/MM/DD 00:00
Time & date / Date / Off
48M/32M/24M/16M/5M
12 Software Fileware version number
SETTINGS

+
-
+
-
+
-
+
-
25
MENU
REPLAY
SHOT
OK
TF
USB ON
TEST
OFF
22 23 24
13
14
15
16
17
18
19
20
21
3.5mm
1.35mm
MENU
Back Select
Mode
PIR Level
PIR Interval
Capture Num
Video Length
OK
21. OK button
22. TF slot（Supports 16/32GB and more）
23. USB interface
24. Switch(ON/TEST/OFF)
25. Battery pack
CODE
13
14
15
16
17
18
19
20
21
22
23
MENU
Audio Recording
Time Lapse
Timer Setting
Loop Record
Camera Name
Security Code
Auto WIFI off
Wifi SSID
Wifi Password
Format
Default
ON/OFF
Normal / TL video / Off
Start: 00:00 / Stop: 00:00
On / Off
OFF/ON
OFF/ON
1 Min / 3 Min / 5 Min
TJ48K1W (Initial)
12345678 (Initial)
NO /Yes (Format TF card)
NO /Yes
SETTINGS
Step1: Slide the switch to“TEST”posi-
tion(The screen is on)；
Step2: Press“Menu”key to enter the
setting interface；
Step3: Press ▲, ▼ to scroll through
the setting options, and the “OK” button
to confirm the setting；
Step4: Press “MENU” key to exit.
+
-
+
-
+
-
+
-
-
+
-
+
-
+
-
+
ADAPTER
TF
DC MATE PLUG
Parameter Settings

Description Note
Monitoring mode.
Switch off camera.
1. Setup.
2. Manual shooting of photos or videos.
3. Check and replay.
Mode
ON
TEST
OFF
Preparation before use
Manually shooting or recording under"TEST" mode
1.Power selection
1.1 Insert 8×1.5V AA battery into the battery compartment.
1.2 When using the power adapter (optional)：At the bottom of the camera,there is external power
supply port,which support DC12V 2A power,power plug size is 3.5X1.35mm.
2.Insert a micro SD storage card (Class 10 TF card, FAT/FAT32）
In the "TEST" mode, if you do not operate for a
long time, the camera will enter the power saving
mode and the screen will shut down. The screen
can be turned on by pressing any button on the
camera.
File operation in TFcard
● Slide the switch to “TEST” position (The screen is on).
● Press Key ▲ or ▼ Key to quickly shift between photographing an videoing.
● Press Key “SHOT” to record or take a picture.
Step1: Slide the switch to “TEST” position (The screen is on);
Step2: Press "REPLAY" to enter TF card browsing → Press the
"MENU" key → Press "OK" to enter the delete option → Press "OK" to
confirm the settings, press "MENU" to exit settings.
【Delete current file】 to delete current file
【Delete all files】 to delete all files
【Activate slide show】 to slide show the files
【Write protect】to lock the files so that you can’ t delete them.The protect-
ed file has an icon“ ”.
Step3: Press “REPLAY” key to exit.
Camera
Image
Video
time
SD
00:00:00
720
SD
TF
Card
00/00/00 00:00:00
Video Mode
Date Time
Camera
Image
16M
Picture
Quantity
9999
SD
TF
Card
Photo
size
Video
resolution
Photo Mode
MENU
REPLAY
SHOT
OK
MENU
Back
OK
Select
Settings
Delete current file
Delete all files
Activate slide show
Write protect
①.Be sure the camera is powered OFF before inserting or removing SD cards or batteries.
②.Please format the memory card before the first use.
③.This trail camera cannot be charged with NiMH rechargeable batteries.
Note:
3.Switch Function Introduction:

WIFI APPconnection
Setting of "TimeLapse"
If you enable this function, the PIR Sensor of the camera will be deactivated.
* Normal: According to the "Mode" setting, the camera will take photos /
videos / photo + video in the time interval you set.
* TL video: The camera will take photos at the time interval you set. These
photos will be formed to a video.
Browse photos/videos
Follow steps below to preview photos or videos in your camera:
Step1: Slide the switch to “TEST” position (The screen is on).
Step2: Press “REPLAY” Key to enter the picture or video interface.
Step3: Press ◄ Key and ► Key to select the photo or video to preview.
Step4: When playing a video, press the “OK” button to play or pause, press the “MENU” button to exit the
video playback.
Step5: Press “REPLAY” Key to exit.
IOS / Android
MENU
Back
OK
Select
Time Lapse
Normal
TL video
Off
Setting of "Time Setting"
You can enable it to set a working period for the camera.It will enter the
standby mode if the time is not within the period.
* If the start time is earlier than the current time, the setting will take effect
the next day.
* If the start time is later than the current time, the setting will take effect on
the same day.
USB cable connection computer precautions
You can browse, copy, and delete the images and videos on your computer by connecting the camera to
your computer with an USB cable. When using the USB connection, make sure that the switch is on
TEST mode.
1.The memory card cannot be formatted via USB when connected to the computer.
2.Before connecting USB, please input the password if the camera is setting.
APP Installation
Before using the WIFI function, please install the APP on the smartphone
device.
1.For Android smart phone, please go to Google Play and search "Venari"
to download and install it. For IOS smart phone, please go to Apple Store
and search "Venari" to download and install it.
2. You can scan the below QR code to get the APP “VENARI”.
MENU
Back
OK
Select
Timer Setting
Timer Setting
Hr : Min
Start : 00 00
Stop : 00 00
When reading the "WIFI APP Connection" section, please browse "Operation Video Guide" at
the same time so that you can use this product faster.

WiFi Connection
In the upper right corner of the “VENARI” APP, there is a “User Guide”, There has full detailed steps
about WIFI connection.For better use of WIFI function, please see the “User Guide”.
1.Please turn on the camera, you can set the camera in TEST/ON mode.
2.Before using the “VENARI” APP, please make sure the phone's Bluetooth and WiFi functions are turned
on.
Step 1: Turn on VENARI app,click “Connect device WIFI”
Note: During the connection process, VENARI may need to access your location, pictures and other files.
Please all select “ALLOW” or “OK.”
Step 2: Select the corresponding Bluetooth name.(Hownic)
Step 3: Select “Auto Connect”, the APP will start automatically connecting to the cameraʼs WIFI hotspot
soon.
Step 4: Waiting for 60s, the APP will connect the WIFI automatically.
Step 5: When connecting the WIFI function again, you can quickly connect to the corresponding camera
in "Device List”.
VENARI
Connect device WiFi
No device connected
User Guide
Bluetooth list
Hownic 56:65:33:34:84
Cancel
Auto Commect
Manual Connection
Cancel
Connect manually:If the camera’ s WiFi name
(SSID) and password have been
changed,please select Connect
manually.Please select the camera’ s WiFi
name (SSID) manually in the WLAN list in the
system settings and connect with the
corresponding password (the camera’ s WiFi
will take about 30 seconds to turn on, please
be patient),and then return to VENARI after
successful connection.
Auto Connect:If you have not modified the
WiFi name (SSID) and password of the
camera,please select Auto Connect-the app
will use the default WiFi name (SSID) and
password of the camera to connect with the
camera.
The APP will start connecting to the
camera’ s WiFI hotspot soon

Setup the camera outdoor
APP Operation
After successful connection, you can watch live video in the APP choose to take photos/ record videos,
change setup and download the files to your phone, and manage the files in the APP menu.
1.When the WIFI is waiting for connection, WIFI status indicator will flash frequently.
2.When the WIFI connected, the WIFI status indicator will flash once every second.
Note:
Once all the setting has been done,the camera is ready for field use:
● Mount the camera about 0.5-2m high with the camera pointed at a slight downward angle.
● Keep the camera facing north or south NOT east or west due to sunrise and sunset could produce false
triggers and overexposed images.
● Clear all obstructions in front of camera to avoid obscuring camera lens or PIR sensor.Otherwise,the
camera may be triggered by mistake during windy or hot days.
Battery power
Photo interface
Video interface
Exit function
Shoot manually
Menu Settings
Delete
File browsing
Waking up the camera
The camera is opening a WiFi
hotspot
Waking for the phone to join
59
CANCEL
Device List
TJ48K1W.123T Connect
Inactive
Add Camera

YES
120°
90°
30°
30°
Example:Mounting
120° total PIR angleStrap Installation Bracket Installation Camera tilted
down slightly
FAQ
● In order to avoid false triggers,you should adjust PIR sensitivity depend on the object or wild animals;-
size,the speed and distance of the movement.
● Installation of the Class 10 TF( microSD ) card with FAT/FAT32 before setting up the camera.
● Make sure that time and date is correct.
● Make sure that the camera’s mode switch is “ON” mode(before you leave).
Question: Are rechargeable batteries allowed?
Answer: No，because, rechargeable batteries are normally 1.2V, but the camera needs at least a
battery pack of 8*1.5V batteries.
Question: What shall we do if some menus are not selectable - When the "TimeLapse" function is
turned on, the "Video" and "Photo+video" functions are not selectable.
Answer: Please turn off the "TimeLapse" function.
Question: Why we sometimes shoot blank photos with no moving targets in it?
Answer: The PIR sensor is very sensitive so that it will be triggered by some environmental factors
such as a piece of falling leaf when the setting is at high level, so it is strongly recommended that the
setting should be made at the medium level.
Question: Why some photos taken at night are very dark, which seems that the IR LEDS were not
working?
Answer: The IR LEDS have a high power consumption and will become malfunctioning when the
power of battery pack goes down. This problem can be solved by replacing the batteries.
Question: Why only photos are produced when the setting is for both photos and videos?
Answer: There is a heavy power consumption when the video function is started and the camera will
only shoot photos with no videos if the power of battery pack goes down. Please change batteries to
ensure normal working of the camera.

COMPLIANCE
The WEEE logo on this product or its documentation indicates that the product must
not be disposed of as household waste. To help prevent possible harm to human
health and/or the environment, the product must be disposed of in an approved and
environmentally safe recycling process. For further information on how to dispose of
this product correctly,contact the product supplier,or the local authority responsible
for waste disposal in your area.
RoHS
MADE IN PRC
ACCESS USER GUIDE IOS / Android
Note:
Only in TEST mode can you see the screen and set related modes. In ON mode, the
screen goes black after 5 seconds, indicating that it has entered the working mode.