Osenous SV-TCP User manual

Hunting Trail Camera
USER MANUAL
CAUTION：
1. Format your TF (micro SD) card before use;
2. TF (micro SD) card Supports 16/32 GB and more.

6
8
9
10
11
12
13
14
15
17 18 20
16
21
19
23
20
22
4
TF
+
-
+
-
+
-
+
-
External power
supply
Camera View ( P SERIES )
ON TEST OFF
5
1
7
2
3

Preparation before use
1. Night Vision Sensor
2. Infrared LEDs
3. PIR Sensor
4. Microphone
5. LED Indicator
6. Buckle
7. Camera Lens
8. Battery Сompartment
9. Lock Hole
10. Menu Button
11. OK Button
12. Replay Button
13. Up/Video Button
14. Down/Capture Button
15. Shot Button
16. LCD Screen
17. Micro SD card slot
18. USB interface
19. Switch (ON/TEST/OFF)
20. DC INPUT
21. Strap Hole
22. Hole for A Cable Lock
23. Tripod Slot
1. Power Supply
This camera support 2 power supply
modes: AA battery and external power.
1.1 AA battery: Which need 4 pieces 1.5V
AA batteries,and make sure the battery
polarity is correct.
1.2 At the bottom of camera, there is exter-
nal power supply port, which support DC 6V
1.5A power,power plug size is 3.5X1.35
mm.
2. Inserting the Memory Card
2.1 Installation of the Class 10 TF(microSD)
card with FAT/FAT32. Support up to 16/32
GB and more.
3. Switch Function Introduction:
Normal working ;
Switch off camera.
1. Custom settings ;
2. Manual shooting ;
3. Check and replay.
Mode Description
ON
TEST
OFF
Note
This trail camera cannot be
charged with NiMH rechargeable
batteries

Manually shooting or recording under " TEST " mode
Browse photos/videos
● Slide the switch to “TEST” position (The screen is on).
● Press Key ▲ or ▼ Key to quickly shift between photographing and videoing.
● Press Key “SHOT” to take a picture manually or to take a video manually.
Follow steps below to preview photos or videos in your camera:
1. Slide the switch to “TEST” position (The screen is on).
2. Press “PLAY” Key to enter the picture or video interface.
3. Press ▲ Key and ▼ Key to select the photo or video to preview.
4. When playing a video, press “OK” Key to play or pause,press ▲ to fast forward the
video,Press ▼ to fast backward the video.
5. Press “PLAY” Key to exit.
Camera
Image
Mode
Size
Picture
Quantity
TF
Card
Photograph interface
Date Time
5M
9999
00/00/00 00:00:00
Camera
Image
Video
Time
SD
00:00:00
SD
TF
Card
00/00/00 00:00:00
Video interface
Date Time
SD

MENU
Back
OK
Select
Setting
Mode
PIR Interval
PIR Level
Capture Num
Video Length
Menu Overview (Default parameters)
● Slide the switch to“TEST”position(The screen is on)；
● Press“Menu”key to enter the setting interface；
● Press ▲, ▼ to scroll through the setting options, and
the “OK” button to confirm the setting；
● Press “MENU” key to exit.
CODE MENU
Mode
PIR Interval
PIR Level
Capture Num
Video Length
Video Size
IR LED Power
Language
Set Clock
Stamp
Photo Size
Photo / Video / Photo+video
5 seconds - 60 minutes
Low / Middle / High
1 Photo / 2 Photo / 3 Photo
3 seconds - 10 minutes
720P / 1080P /...
Auto / Near / Middle / Far
English, Deutsche, Français,Italiano,日本語 ...
YY / MM / DD 00:00
Time & date / Date / Off
24MP / 20MP / 16MP / 12MP / 8MP / 5MP
Software
Audio Recording
Time Lapse
Timer Setting
Loop Record
Camera Name
Security Code
Format
Default
FW UPDATE / FW VERSION
ON / OFF
Normal / TL video / Off
ON / OFF
ON / OFF
ON / OFF
ON / OFF
NO / Yes
NO / Yes
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
SETTINGS

MENU
Back
OK
Select
Timer Setting
Timer Setting
Hr : Min
Start : 00 00
Stop : 00 00
Setting of " Time Setting "
Setup the camera outdoor
You can enable it to set a working period for the camera.It
will enter the standby mode if the time is not within the
period.
Once all the setting has been done,the camera is ready for field use:
● Mount the camera about 0.5-2m high with the camera pointed at a slight downward
angle.
● Keep the camera facing north or south NOT east or west due to sunrise and sunset
could produce false triggers and overexposed images.
● Clear all obstructions in front of camera to avoid obscuring camera lens or PIR
sensor.Otherwise, the camera may be triggered by mistake during windy or hot days.
● In order to avoid false triggers,you should adjust PIR sensitivity depend on the
object or wild animal's size, the speed and distance of the movement.
● Make sure that time and date is correct.
● Make sure that the camera's mode switch is “ON” mode(before you leave).
NOTE:
Loop Record: When the memory capacity is insufficient, the new video will
overwrite the old video in time sequence.
* If the start time is earlier than the current time, the
setting will take effect the next day.
* If the start time is later than the current time, the setting
will take effect on the same day.

TF card setting
USB cable connection computer precautions
● Slide the switch to “TEST” position (The screen is on);
● Press "PLAY" to enter TF card browsing → Press the
"MENU" key → Press "OK" to enter the delete option →
Select "One" or "All" and press "Ok" to confirm → Press
“PLAY” key to exit.
1. Make sure that the switch is on “Test” mode.
2. The memory card cannot be formatted via USB When connected to a computer,
only picture/video browsing, copy and delete etc. can be done.
3. Before USB connecting，please enter password if the camera has been set.
Setting of "Time Lapse"
If you enable this function, the PIR Sensor of the camera
will be deactivated.
* Normal : According to the "Mode" setting, the camera will
take photos / videos / photo + video in the time interval you
set.
* TL video : The camera will take photos at the time interval you set. These photos will
be formed to a video.
MENU
Back
OK
Select
Setting
Delete current file
Delete all files
Activate slide show
Write protect
MENU
Back
OK
Select
Time Lapse
Normal
TL video
Off

RoHS
COMPLIANCE
The WEEE logo on this product or its documentation indicates that the
product must not be disposed of as household waste. To help prevent
possible harm to human health and/or the environment, the product must
be disposed of in an approved and environmentally safe recycling
process. For further information on how to dispose of this product
correctly,contact the product supplier,or the local authority responsible for
waste disposal in your area.
www.osenous.com Access User Guide
Note:
Only in TEST mode can you see the screen and set
related modes. In ON mode, the screen goes black after
5 seconds, indicating that it has entered the working
mode.