OSP furniture Designlab ALP2817VF User manual

1
ALP2817VF
2-DRAWER VERTICAL FILE
ASSEMBLY INSTRUCTIONS
WARNING
OSP®FURNITURE LIMITED PRODUCT WARRANTY
Design Lab Products
• 3 years
*All warranties are limited to the original purchaser for normal usage. This warranty will not cover labor, freight or damage from misuse, abuse, negligence,
damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing.
Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail , by Fax [phone], or
1. Do not use unless all bolts, screws and knobs are
securely tightened.
2. Check that all bolts, screws and knobs are tight every three
months or as needed.
3. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
4. Do not use as a stepladder.
5. Use for its intended purpose only.
6. Use mild detergent only for cleaning.
®Products October 2021

2
Lock Dowel Fastener
Handle
Screw Truss Head
Screw Pan Head
Screw
N/A
3.5 X 12
#6 X 1-1/2”
16 PCS
2 PCS
4 PCS
1 PC
1 PC
Screw
Leg Stud
Wall Plug
26 PCS
4 PCS
1 PC
M4 X 12
N/A
N/A
M4 X 22
4 PCS
2 SETS
N/A
14”
Metal Rod
Metal Runner
Safety Strap 1 PC
N/A
Hammer
Screw Driver
N/A
L-Bracket N/A 1 PC
Screw M3 X 20 4 PCS
Lock N/A 1 SET
Lock Spacer N/A 1 PC
DRAWING

3
(1) Side Panel Left (1 PC)
(3) Top Panel (1 PC)
(5) Back Panel (1 PC) (6) Base Panel (1 PC)
(2) Side Panel Right (1 PC)
(4) Bottom Panel (1 PC)
(7) Drawer Front Panel 1 (1 PC)
(9) Drawer Side Panel Left (2 PCS)
(11) Drawer Back Panel (2 PCS)
(8) Drawer Front Panel 2 (1 PC)
(10) Drawer Side Panel Right (2 PCS)
(12) Drawer Base Panel (2 PCS)

4
CAUTION: THIS ITEM IS MADE OF LAMINATED PARTICLEBOARD AND MEDIUM DENSITY
FIBRE BOARD TOBE ASSEMBLED ON A DRY,SOFT, SMOOTH AND CLEANSURFACE.
DO NOTUSEDETERGENT OR CHEMICALS. AVOID DAMP AREAS AND DIRECT SUNLIGHT.
ALP2817VF
2-DRAWER VERTICAL FILE
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 3
STEP 2
STEP 4
PROOF
PROOF
LOCK DOWEL
FASTENER
7
9
8
10
9
10
7
9
8
10 10
9
7
9
8
10
11
12
12
9
10
11
9
9
10
10
7
8
DETAIL A
LOCK
DOWEL
FASTENER
DETAIL A

5
ALP2817VF
2-DRAWER VERTICAL FILE
ASSEMBLY INSTRUCTIONS
STEP 5
STEP 7
STEP 6
STEP 8
METAL ROD
DETAIL A
DETAIL A
SCREW TRUSS
HEAD M4 X 22
HANDLE
DETAIL A
DETAIL A
SCREW M3 X 20
LOCK
LOCK
SPACER
DETAIL A
SCREW M4 X 12
METAL RUNNER
3rd
HOLE
DETAIL A
DETAIL A
DETAIL A
SCREW M4 X 12
L-BRACKET
7
9
8
10
11
3
710
9
11
7
8

6
ALP2817VF
2-DRAWER VERTICAL FILE
ASSEMBLY INSTRUCTIONS
STEP 9
STEP 11
STEP 10
STEP 12
DETAIL A DETAIL B
DETAIL A
DETAIL B
SCREW M4 X 12
METAL
RUNNER
2nd
HOLE
2nd
HOLE
BACK
FRONT
1
2
3
1
2
1
2
3
1
2
5
3

7
ALP2817VF
2-DRAWER VERTICAL FILE
ASSEMBLY INSTRUCTIONS
STEP 13
STEP 15
STEP 14
STEP 16
DETAIL A
LEG
STUD
DETAIL A
1
4
2
6
3
1
4
2
6
3
1
4
2
1
4
2

8
ALP2817VF
2-DRAWER VERTICAL FILE
ASSEMBLY INSTRUCTIONS
STEP 17 STEP 18
SCREW PAN
HEAD 3.5 X 12
WALL
PLUG
SAFETY
STRAP
DETAIL A
SCREW #6 X 1 1/2”
DETAIL A
7
8
1
2
3