
HDMI Microscope User Manual
KS103300G4-Ver1.0
- 4 -
photographing and recording. “Upward” function be activated after
entering the menu or during browsing. Video playing will be changed
into “fast rewind” function in the mode of playing back.
○
D Middle button:Record/camera/play back function. “Recording”
function is for the mode of recording. “photographing” function is for
the mode of photographing. In the mode of playing back, the recording
file carries the function of “playing back”.
○
E Right button:Mode/sure/crosshair (hot key) function. Mode
includes “camera”, “play back” and “record”. Without entering the
menu, “Mode switch” function will be activated and can be switched
successively among three modes, namely photographing, playing back
and recording. “Confirm” function will be on after entering the
menu. Long press in the mode of photographing and recording
activates the mode of “cross line” shortcut key.
④digital camera Switch
Put the switch to right: turn on the digital camera; put the switch to
left: turn off the digital camera.
➄Focus knob
Rotate the knob to implement the focus function;
Rotate clockwise: back focal length decreases and object distance
increases;
Rotate anticlockwise: back focal length increases and object distance
decreases.
⑥light lamp
The coaxial light and the diffuse reflection coexist, and the two effect
lights are respectively controllable; the coaxial light lamp adopts a
circular distribution of 13 light beads at a small angle; the diffuse
reflection light is distributed by 18 high-brightness light beads, and the
brightness is uniform.
⑦Bottom plate
Aluminium alloy bottom plate.
⑧TF card slot
The location of TF card, photos and videos will be stored in TF card.
⑨Mobile knob
Loosen the knob anticlockwise and the stand can be adjusted at any
angle; tighten the knob clockwise and the current position of the digital
camera can be fixed.
⑩Anti-slip ring
Prevent the microscope from slipping
Adjustment knob of the
coaxial light
Rotate Clockwise: turn on the coaxial light/strengthen coaxial
lightness;rotate counterclockwise: Reduce the coaxial lightness/turn
off the coaxial light.
Adjustment knob of the
diffuse reflectance light
Rotate Clockwise: turn on the diffuse reflectance light/strengthen the
diffuse reflectance lightness;rotate counterclockwise: weaken the
diffuse reflectance lightness/turn off the diffuse reflectance light.
Monitor switch
Press and hold the on key for more than 4 seconds to turn on or off.
(the digital camera stops working after the monitor is turned off)
Wired controller interface
Connect to the wired controller which is an optional accessory to adjust
parameters of the monitor.