Complete Installation Guide
1) Signal transmission cable must be the copper
cable. Other material cables will cause the decrease
of signal transmission quality and distance.
2) Transmitting network data signal by mixing twisted
pair, telephone line connection is forbidden.
3) This device has no waterproof design. Please use
the product in dry environment.
4) Please choose matching power supply
specification (DC12V/1A) to supply power for devices
respectively.
5) Check the local unit and remote unit carefully
before use. Green indicator is remote unit. Red
indicator is local unit. If you install local unit and
remote unit conversely, the devices can not work.
6) Long-distance cable connections must be standard
connection method, such as welding or use
connectors.
7) If the devices fail, you do not disassemble or repair,
please contact us timely.
Tips: If devices activation fails, the devices will
automatically re-try to activate after an intervals. In
this interval of time (about 1 minute), LINE indicator is
off.
Panel
Indicator
Feature
Phenomenon
ON Power supply work
smoothly.
POWER OFF Power supply can not
work smoothly.
ON The line has been
activated
OFF The line has not been
activated
LINE
Flashing
The line is trying to
activate.
ON Correct connection of
Ethernet interface.
LINK OFF Disconnection of Ethernet
interface.
Flashing
Ethernet is receiving and
sending data.
DATA OFF No data transceiver of
Ethernet interface.
Product Use Notes Simple Fault Cases
Application Field Cases
Page 6 of 9
