Outdoor Leisure 5501 User manual

5501
34" Steel Fire Pit
Assembly Instructions
34" Steel Fire Pit
Please check the carton and packing materials before disposing to
make sure that you have all the parts for this product
Part List
Part No. Description Qty
.
A Handle 1
B Mesh wire cover 1
C Wood grate 3
D Fire bowl 1
E Steel top 4
F Side panel 4
G Leg 4
H Poker 1
I PVC cover 1

Assembly Instruction
1. Attach the Handle(A) to the Mesh Wire Cover(B),using 1pc M6 Nut(AA).
2. Attached the Wood Grate(C) to the Fire bowl(D),using 6pcs M6×12 Bolt(BB).
3.Put the 4pcs Steel Top(E) together, using 8pcs M6×12 Bolt(BB).
4.Attach the Leg(G) to the assembled Steel Top(E), using 4pcs M6×12 Bolt(BB) .
5. Attach the Side Panel(F) to the Leg(G),using 16pcs M6×12 Bolt(BB) .Tighten
all screws by Wrench (CC) .

6. Upside down the assembled Table Top, place the Fire bowl(D) to the Top, put
the Mesh Wire Cover(B)to the assembled Fire bowl. Put the Poker(H) near the
fire pit. Now your fire pit is ready for use!
Warning
FOR OUTDOOR USE ONLY.
* KEEP THE OUTDOOR FIRE PIT AT LEAST 20 FEET AWAY FROM ANY FLAMMABLE
SURFACE OR DWELLING.
* KEEP AWAY FROM CHILDREN AND PETS.
*CHECK WITH THE LOCAL OFFICIALS AND FIRE DEPARTMENT FOR ORDINANCES
REGARDING THE USE OF OUTDOOR FIRE PITS.
* NEVER USE GASOLINE, KEROSENE, LIGHTER FLUID, ALCOHOL OR ANY OTHER
FLAMMABLE MATERIAL TO LIGHT YOUR FIRE.
* ALWAYS USE GLOVES AND PROTECTIVE GLASSES WHEN LOADING THE FIRE PIT OR
EXTINGUISHING THE FIRE.
* NEVER LEAVE THE FIREPIT UNATTENDED WHEN NOT IN USE
* DO NOT MOVE THE FIRE PIT WHEN HOT OR LIT
* ALWAYS SET THE OUTDOOR FIREPIT ON A LEVEL NON-FLAMMABLE SURFACE
* DO NOT TOUCH FIRE PIT WHILE IN USE.
* NEVER OVER LOAD THE OUTDOOR FIREPIT
* ALWAYS MAKE SURE THE FIRE AND ASHES ARE COMPLETELY EXTINGUISHED WHEN
NOT IN USE OR UNATTENDED
* HAVE A FIRE EXTINGUISHER AVAILABLE NEAR THE FIRE PIT IN CASE OF
EMERGENCY
* THE LOG GRATE IS NOT INTENDED FOR COOKING, AND SHOULD NOT BE USED FOR
THIS PURPOSE
* DO NOT BURN COAL, LEAVES OR OTHER COMBUSTIBLE MATERIALS IN THE FIRE PIT
Care and Maintenance
This fire pit is a quality built product; the frame structure is made of powder coated steel, and under normal
use and conditions is rust resistant. However if scratched, or under certain atmospheric conditions rust may
occur. Should rust occur, we suggest using a steel brush or steel wool to remove the rust on the affected area.
When the area is clean, apply a coat of primer an when dry spray a high heat anti rust metal paint onto the
frame.
We also recommend the fire pit to be cleaned after use each time and cover it with pvc cover when not in
use.
CLEANING
This outdoor fire pit should be cleaned on a regular basis to promote and longer product life.
Do NOT attempt to clean this outdoor fire pit until the fire is COMPLETELY COOLED.
Do NOT clean any part of this outdoor fire PIT with oven cleaner as it may damage the finish.
STORAGE
Do not move or store this outdoor fire pit until completely cooled.
carefully remove the coals and ashes and dispose in a proper manner according to local
and state ordinances after the fire pit is completely cooled .
2.Cover fire pit when not in use. Make sure that the fire pit is completely cooled before covering.
3.Store assembled in a location away from children and pets.
Note: If not in use, store fire pit in a dry location to maximize product life.
MADE IN CHINA 2019-9