Outdoor Revolution Jet Stream Electric Pump User manual

1
IMPORTANT INFORMATION
 Ensure the correct nozzle is used for the product you are inang.
 Do not block the inaon or deaon parts as this could clog up the
system. Make sure the pump has enough venlaon during use.
 Do not use the electric pump connuously for more than 20 minutes as
this may cause over heang.
 Do not leave the pump unaended during use.
 Do not allow children to use the Jet Stream Electric Pump unless under
constant guidance and supervision.
 Ensure the Jet Stream Electric Pump is unplugged and stored in a dry
place when not in use.
CONTENTS
1 x Pump
1 x Power Adaptor Plug
1 x Air Hose
3 x Nozzles
1 x Bag
SPECIFICATION
1) Voltage: DC12V
2) Power: 100W-120W
3) Working current: 10A . max current : 12A
4) Power Cord length: 5M with cigaree lighter
5) Cylinder diameter: 40mm
6) Max rated pressure: 8psi
7) Oulow : 35-38Limiter/ minute
2
INSTRUCTIONS
 First, locate the 12v Power Adaptor plug and insert in to your
vehicles 12v power socket.
 Next, set the pump to the desired (PSI) pres-
sure;
Press (+) to increase the pressure
Press (-) to decrease the pressure
 When the desired pressure is reached hold the SET buon for 5
seconds to set. The light should ash a few mes to indicate it is
set.
 Locate the air hose and aach to the pump.
 Select the correct nozzle for the item you are inang and aach
to the hose.
 Insert the air hose in to the valve on the product.
 Turn on the power switch to start the pump.
 The pump will cut o when the correct pressure is reached.
 Detach the air hose from the valve