Overline Systems Digitear INEAR User manual
INEAR
User Guide
Version 09/11/2018
DE-NR InEarFCC ID : 2ANZJDNR1
IC : 23304-DENR1
English
Table of Contents
1 - DESCRIPTION OF InEar
2 - FUNCTIONNING OF InEar
3 - PLACEMENT INTO THE CHARGER
4 - WARRANTY
5 - CERTIFICATIONS
6 - TECHNICALS CHARACTERISTICS
FUNCTION InEar STATUS ACTION LED STATUS
ON OFF Press switch LED flashes once #1
OFF ON Press and hold switch LED flashes once
Pairing OFF Press switch 3 times
rapidly
LED flashes rapidly
Charge Place InEar in charger 2 separate 2 seconds
flashes
Charge complete OFF OFF
ON and pairing
check
ON Press switch LED flashes once
b- slide back up to lock in ear-
piece
Ear tips replacement
1 - DESCRIPTION OF InEar
Disposable ear tips
Charge connectors
On/Off Switch
LED
2 - FUNCTIONNING OF InEar
The InEar earpiece’s LED gives its user all kinds of information.
3 - PLACEMENT INTO THE CHARGER
#1 - If the LED flashes twice by intermittence, the InEar isn’t paired to the beltpack.
a- slide back the lock then insert
slightly slanded earpiece
6 - TECHNICALS CHARACTERISTICS
Radio
Version
Class
Battery
Type
Life
Recharging
Generals specifications
Material
Weight
Size
Nominal voltage (DC)
Frequency range
Bluetooth range
Tip material
Bluetooth 4.2
Class 1
2 400 MHz - 2 483 MHz
<10 meters
CP1254A3 Coin Power 60mAh
150 minutes continously / approximately 6 hours in eco mode
2 hours
User
3,7 V
5 to 45°C
ABS-PC
4 g
(19.5x15x9)mm
Silicone
Audio
Codec
Resolution
SNR
Bandwidth
APTX
16bits / 44kHz
92 dB
0,1 .. 14 kHz
4 - WARRANTY
Elements NOT covered by the warranty
This warranty only covers fautly parts and the manufacturing of the product. This warranty does not
cover :
- Periodical maintenance and reparations or replacements of parts due to normal wear and tear
- Shipping and handling costs and the risks associated with the transportation and the retrieval of the
product by the final customer
- All adaptations of the product which would be necessary to make it comply with the technical and/
or security standards in a country other than the one for which the product was originally designed
and manufactured for
- Consumable elements: elements that are scheduled to be replaced periodically during the life of the
equipment ( for example: ear tips, batteries over 12 months after the purchase date, and connection
cables)
The deteriorations or defects of the product resulting in:
- A poor usage or installation of the product ( for example: using the product in a way not intended,
installation or usage not standard to ‘s instructions and to the technical standards or
security in the country where it is used)
- Maintenance of the product non-compliant to Overline Systems’ instructions or negligence in
maintenance of the product
- Any mishandling of the product (ex: false maneuvre, fall, shock, impact, immersion ) or an
inappropriate environment (ex: bad aeration, vibrations, exposure to humidity or excessive heat,
contacts with a product (material or software), consumable, accesssory or device non compatible
or defective, an adaptation of the product towards its end of being put to conformity with technical
or security standards in a country other than the one the product was originally designed and
manufactured for
- A modification or a reparation of a product not made by a third party approved by Overline Systems
- Sinister (ex: fire, flood, earthquake, lightenning)
Produit: (TX-Box, Charger Box, Beltpack, InEar)
24 months pieces or workshop labor
Battery: 12 months (starting the purchase date)
ACCESS POINT: covered by the manufacturer’s initial warranty
Accessories alone will not be taken in by our reparation centers.
5 - CERTIFICATIONS
Tout changement ou modification apporté à cet équipement non expressément approuvé par OVERLINE
Systems peut annuler l’autorisation d’utiliser cet équipement.
Any changes or modifications made to this equipment not expressly approved by OVERLINE Systems may void the
authorization to operate this equipment.
Item (HVIN) : DE-NR InEar
Type identification : DE-NR-001
PMN : Digitear
CE
L’équipement est conforme aux exigences suivantes :
This product complies to the following requirements :
Radio :
ETSI EN 300328 V2.1.1
Compatibilité électromagnetique :
ETSI EN 301 489-1 V2.2.0 (DRAFT)
ESTI EN 301 489-17 V3.2.0 (DRAFT)
Sécurité :
IEC 62368-1: 2014 (2.Edition) and Cor. 1: 2015
EN 62368-1: 2014/AC: 2015/A11: 2017
Exposition RF (DAS) :
EN 50666:2013/AC:2014
EN 62209-2 (2010)
1999/519/EC
Doc disponible sur www.digitear.eu
Doc available : www.digitear.eu
FCC ID : 2ANZJDENR1
IC : 23304-DENR1
L’équipement est conforme aux exigences suivantes :
This product complies to the following requirements :
47 CFR Part 15
RSS-247 Issue 2
RSS-Gen Issue 4
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
NOTICE : This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Exposition RF (DAS)
RF exposure :
IEEE 1528-2013
RSS-102 Issue 5
Radiofrequency radiation exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Radiofrequency radiation exposure Information:
The radiated output power of the device is far below the FCC radio frequency exposure limits.
Nevertheless, the device shall be used in such a manner that the potential for human contact during
normal operation is minimized.
Table of contents
