OVOVS OL-20S01 Instruction Manual

Ｕｓｅ Ｇｕｉｄｅｌｉｎｅｓ
12
Ｐｌｅａｓｅ ｒｅａｄ ｔｈｅ ｍａｎｕａｌ ｂｅｆｏｒｅ ｐｒｏｄｕｃｔ ｕｓｅ． Ｉｔ ｗｉｌｌ ｂｅ ｅａｓｙ ｔｏ
ｏｐｅｒａｔｅ ｔｈｅ ｐｒｏｄｕｃｔ ｗｉｔｈ ｉｔ．
Wireless Remote Control
LED Search Light
OL-20S01
Ｐｒｏｄｕｃｔ Ｄｅｓｃｒｉｐｔｉｏｎｓ
Thanks for purchasing the OL-20S01 Wireless Remote Control LED Search Light! It has many
advantages, such as ultra-high-brightness, long lighting distance, long service life, high sensitive
control, etc. It can work in a harsh environment normally. This product uses advanced circuit design
and professional optical solutions to ensure high luminous efficiency, reduce the consumption error
rate of the optical output.
Model：OL-20S01
Product Name: Wireless Remote Control LED Search Light
Model 1:
Wireless Remote Control with Laser Light Model 2: Wireless Remote Control with Logo, but without Light
Ｐｒｏｄｕｃｔ Ａｃｃｅｓｓｏｒｉｅｓ
Please ensure that you have all of the accessories before you use this product. They are necessities when
operating this product
Parts List
Number Parts Name Quantity Remarks
1 Controller 1
2 Screws 1 Screws, Locknuts and Wrenches
3 Controller Bracket 1
Ｐｒｏｄｕｃｔ Ｓｐｅｃｉｆｉｃａｔｉｏｎｓ
Light Source: LED Chips
Working Voltage: 10-30V
Power: 60W
Color Temperature: 6500K
Lumen: 2000lm
Illumination Angle: 0~40° (Up/Down)
0-360° (Left/Right)
Working Temperature: -20℃ ~ 80℃
Material: PC plastic + aluminum alloy
Weight: 1.95Kg/pcs
Lighting distance: 100m/500m/1000m
Remote Control Distance: ≤ 100m
Product Dimensions: 201X191X185mm
Warranty: 1 Year
Ｐｒｏｄｕｃｔ Ｆｅａｔｕｒｅｓ
There have multi-functions, such as Spotlight, Laser Light, Backlight, Automatic Rotating
Research, Reset, etc.
（1）Spotlight: 500M Long Lighting distance, Wide Lighting Range and ultra-high-brightness;
（2）Laser Light: 1000M Long Lighting distance, the light is very focused;
（3）Backlight: There are white and blue colors. Blue is smooth and white is pure. They will be
lighted when the light is connected with the power.
（4）Automatic Rotating Research: The auto searching angle is 180° (Left&Right)
（5）Manual Search: It can be turned left and right about 360° or turned up and down about
40° with controller.
（6）Reset: The head of the product will be reset to 0° automatically when the power is off.

Model 1
① — Spotlight ② — Laser Light ③ — Backlight ④ — Cigarette Lighter Connector
There have multi-functions, such as Spotlight, Backlight, Automatic Rotating Research,
Reset, etc.
（1）Spotlight: 500M Long Lighting distance, Wide Lighting Range and ultra-high-brightness;
（2）Backlight: There are white and blue colors. Blue is smooth and white is pure. They will be
lighted when the light is connected with the power;
（3）Automatic Rotating Research: The auto searching angle is 180° (Left&Right);
（4）Manual Search: It can be turned left and right about 360° or turned up and down about
40° with controller;
（5）Reset: The head of the product will be reset to 0° automatically when the power is off.
Model 2
① — Spotlight ② — Backlight ③ — Cigarette Lighter Connector
Ｐｒｏｄｕｃｔ Ｉｎｓｔｒｕｃｔｉｏｎｓ
Remote controller code matching：
① Install battery on the remote controller;
② Press the ON button of the remote controller first without letting go;
③ Then connect the positive and negative poles of the power supply to ensure that the
backlight is on;
④ When the spotlight is turned on, the code matching is successful. At this time, you can
release the ON button of the remote controller
⑤ If the code matching is unsuccessful or the ON button is released in advance, please
return to step 2 and start again;
Description of the Remote Controller Button:
Note: No code matching is required under daily use. Only in the following situations, code
matching is needed:
① When using this product for the first time;
② When replacing the remote controller battery.
Ｐｒｏｄｕｃｔ Ｃａｒｅ ａｎｄ Ｍａｉｎｔｅｎａｎｃｅ
（1）The battery needs to be replaced with a new one when the indicator light of the
controller is not lit or weak, or the remote control signal is intermittent during use;
（2）Please take out the battery from the controller and cut off the power when unused;
（3）Do not use this product in a non-working environment and working voltage;
（4）Do not modify the internal structure and circuit without authorization, and do not
disassemble the product unless necessary;
（5）Please clean the mirror regularly to prevent dust from affecting the brightness.
Turn Up
Turn Left
Turn off
&Reset
Model 1 Spotlight
Model 2 Spotlight&Laser Light
Automatic Research
Turn Right
Turn Down
This product can be applied to a variety of scenarios, so you can choose the corresponding
installation method according to the actual application needs. First of all, you can choose the
strong magnet that comes with this product to directly adsorb on the surface of iron objects.
If you think that the adsorption power is insufficient, you can purchase two more magnets to
install on the bottom of the product to increase the adsorption power in the store where you
purchased the product; or If you want a more powerful installation, you can also use the screws
and wrenches equipped with this product for fixed installation. The following is the installation
diagram:
Ｉｎｓｔａｌｌａｔｉｏｎ
34
battery
Remote Controller
Operating Voltage: 9V

① — Comes with Magnetic ② — Magnet Installation Position
Magnet installation:
Place the product on the surface of an iron object. Please open the bottom anti-skid cover
and fix the magnet on the base with screws, and then reinstall the anti-skid cover, if you want to
increase the number of magnets. Please do not open the anti-skid cover unless necessary.
Screw Installation：
Use the screws and locknuts equipped with this product, and use a wrench to fix the
product on a flat surface with a through-hole. If the wrench is blocked when using the wrench,
first connect the power supply and turn the lamp body to a certain angle before proceeding.
Fix the product on the flat surface which is with holes, using equipped with screws,
locknuts, and a wrench. If the wrench is blocked when using, you can connect the power and
turn the lamp body to a certain angle.
Ｎｏｔｅ
（1）Please check whether there are cracks or scratches on the power cord to avoid leakage
before product use；
（2）Please do not reverse the battery or connect the power with the battery;
（3）Please do not install this product in an environment surrounded by metal objects,
and avoid metal objects blocking it during use;
（4）Please do not place foreign objects on the base otherwise and there should be no
obstacles within the rotating range of the product.
5 6
ＦＣＣＳTATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
（1）This device may not cause harmful interference, and
（2）This device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance Warning:
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.