Oway FT6 User manual

Portable Finger Touch Interactive
Whiteboard (OWAY FT6 Board)
Global First 100-Point Finger Touch Portable Whiteboard

Finger Touch FT6 Interactive Whiteboard Introduction
Introduction：
After years of innovative research and development, FT6 has become
the main product of the new series of OWAY Group Limited. It is not only
more stable but also easier to install and use. Currently, it uses the
world's most advanced laser imaging technology. The level of automation
and stability are far ahead of other products.
Feature:
1．Support 100-point finger touch at the same time;150inch screen
2．Light weight (The main parts include laser emitter and signal receiver,
with a total weight of no more than 500 grams)
3．Auto-calibration, complete within 5 seconds, the success rate of more than
98%.
4．Competitive price
5．The shortest throw ratio: 0.25, you can freely adjust the required screen
size, very flexible.

Installation：
FT6 is small and easy to install. It doesn’t require professional technology to install.
Just install the laser emitter in the middle area above the whiteboard (or flat surface) and put
the signal receiver on the projector.
FT6 installation diagram

Advantages：
1. High cost performance：1. Compared with LCD electronic whiteboards,
FT6 is more cost-effective to pay for the product, installation and
maintenance. And the user can enlarge or reduce the projection screen
according to the demand. The LCD Whiteboard does not have this
feature.
2. Stable performance, not easy to damage：FT6 interactive whiteboard
external circuit only power supply wire and USB interface circuit,
eliminating the data exchange circuit of the LCD panel, and reducing
the information processing lines used for the display screen. It uses
the PCB board to concentrate the circuit on the circuit board,
Reduces failure while reducing power consumption.
3. Good compatibility: FT6 whiteboard is compatible with various software.
4. High stability：Through a variety of anti-abnormal spot interference
algorithms and filter push-pull devices, the system is not easily
affected by the external environment like light and temperature, even
if there are small bugs or dust stuck on the board products can also
operate normally.
5. Full-screen touch：The projection screen can realize full-screen touch. Five
seconds to complete automatic positioning. Infrared and optics can only be
manually positioned. FT6 auto-calibration is more precise and the operation
is easier.
6. Supports 100-point finger touch (100 people write at the same time and support
Windows drawing software 100 points).
7. The projection area works as a touch panel for windows touch.
8. Max projection Screen：Support 40 - 150inch（Non-sunlight room）

9. Portable and Movable：The total weight of whole set is only 500 grams. The
installation is simple and convenient. Simply fix the laser emitter with
screws or suction onto the above projection screen, and fix the signal
receiver to the projector or other object with double-sided tape or a fixed
bracket. The entire process does not require expertise and anyone can install
it.
10.Easy installation and debugging: Through two well-designed adjustment knobs
complete light adjustment.
11.Signal receiver (camera) Integrated positioning software: Connect to another
computer of the same resolution as the computer, without calibration
positioning to operate, which saves the positioning time and makes it easier
to use.
12.Small size：Small laser emitter（size：16.5cm*2.5cm* 3.6cm)，Can be directly
adsorbed on the surface of the white board.
13.Wireless connection ：Wireless data transmission between camera signal
receiver and laser emitter. The camera automatically controls the opening
and closing of the laser emitter through wireless signals, which greatly
increases the lifetime of the laser emitter.
14.Transfer normal whiteboard and wall into finger touch screen：FT6 can
transform any whiteboard or wall into a finger touch screen
15.Any opaque object can be used as a stylus in the interactive area.
16.Support dual screen splicing （Support extended screen splicing, fusion
splicing, hard splicing）:The fusion process is performed at the screen
splicing, and writing with the finger at the splicing area is still very
smooth.

Specifications：
FT6 Finger Touch Interactive Whiteboard Specifications
Calibration
Automatic(5 seconds) / Manual (4/15 points)
Multi-touch
100 points touch,Writing and erasing can be performed
simultaneously
Latency
<30ms
Filter
Software auto-control, enhance stability.
Minimum Active Size
40 inch
Max Active Size
150inch( no sunshine room);
Technology
Laser Image Calibration Technology
Positional Accuracy
±1 Pixel (Resolution: 4096*4096)
Aspect Ratio
4:3；16:9；16:10
Projector ratio
Ultra short throw：0.25
installation distance：0.45m
Short throw：0.86
installation distance：0.84m
Long throw：1.34
installation distance:2.2m.
Number of lasers
unit *3
Power
5w
Power of Laser Beam
280mw*2
Power requirements
3.3V/2A
Signal refresh rate
120fps
Connect
The sensor and computer are connected by USB Cable; Emitter and
Sensor are wireless; Emitter just need power.
Weight
0.5kg
OS Requirement
Windows XP, Windows 7, Windows 8, Windows10;Android
Software
OwaySIWB; multi-board
Certification
CE, FCC
Warranty
2-year
Package
1. Sensor 2.Emitter 3. IR pen 4.USB cable (10m) 5. Remote 6.Power
Adaptor 7. CD with software

multi-board introduction
multi-board Teaching software:
1. Compatible with various teaching materials (ppt, word, etc.)
2. Has a full range of tools, (straightedge, protractor, axes, etc.)
3. Can record and save
multi-board Teaching software