Owl RC OWLRX User manual

OWLRX 5.8GHz Goggle Receiver
User Manual
Ver 1.1
www.owl-rc.com

Introduction
OwlRX is an improved diversity receiver that made to provide stable video
feed in complicated environments such as indoor, forest or structures with
high rate of blocking and multi-pathing areas.
How OWLRX works
The reason OwlRX performs better than most receivers on market it that
special algorithm allows it to switch between antennas with no harm to
video feed as may happen in other diversity modules (noticeable lines on
video when switching between two receivers). That allows to minimize
signal latency, increase switch rate and allows to "extract & reconstruct"
each frame of image from small pieces of available signal from different
antennas. Also OwlRX makes video signal restoration to improve stability,
video quality and prevent frame rolls.
Top Rx
Bottom Rx
0.91' OLED
Up/left Down/right select
www.owl-rc.com

Specification
• Size: 42 * 25 * 23mm
• Weight(net): 23g
• Compatibility: All Fatshark series goggles
(V1,V2,V3,HD1,HD2,HD3,SE,HDO and Attitude V3, V4)
• Interface: Touch buttons * 3, 0.91" 128x32 OLED screen, Micro-USB
• OSD: Yes
• Firmware Updatable: Yes
• Voltage: 5V
• Consumption: 390mA
• Frequency: 5.3-6.0Ghz (A,B,E,F,R,H and Low U,L,O bands)
• Menu: Channel, Frequency, Favorites, Band Scan and Finder
• Antenna Connectors: 2 x SMA (Inner Hole)
• Features: High speed switching rate, special anti-interference algorithm
(non-open source)
Accessories
• Module Door 3D Printed for Dominator goggle(PETG)
• Quick guide
More 3D printed file of module door can be download from our website
at www.owl-rc.com
www.owl-rc.com

Main Menu
Long press “Select Button” into Main menu
Channel: Popular, preset channels
Frequency : Free channel selecting ( Stepping 1/10Mhz)
Favorites : A folder list of all collected Channels
Band Scan: Scan occupied channels or interference from local environment
Finder: Track the signal by using bottom Rx.
Setting: Customized setting for receiver
www.owl-rc.com

Channel
Up/left buttons
Long press: select previous bands
Short press: select previous channel
Select buttons
Long press: back to main menu
Short press: add/remove present channel to favorites folder
Down/right buttons
Long press: switch next bands
Short press: select next channel
•The Fatshark build-in CH buttons can also used to select channel
Channel mode includes preset channels as most of video transmitter supported.
The channel number x1-x8 is list on the left and signal strength is list on the
right. The heart icon means this channel has been added to the favorites list.
www.owl-rc.com

Frequency
Frequency mode is designed for freely chooses any of frequencies that owlrx
supported. Stepping precision is 1Mhz when left/right button is pressed.
It shows the Channel number if the chosen frequency meet to the preset
channel. Rssi A and Rssi B shows signal strength of present frequency .
Up/left buttons
Long press: frequency rolls to lower band at 10Mhz stepping rate
Short press: frequency rolls to lower band at 1Mhz stepping rate
Select buttons
Long press: back to main menu
Short press: back to preset frequency on channel mode
Down/right buttons
Long press: frequency rolls to higher band at 10Mhz stepping rate
Short press: frequency rolls to higher band at 1Mhz stepping rate
www.owl-rc.com

Favorites
Favorites folder lists channels has been marked as favorite on channel mode.
Favorites folder can support a maximum of 8 favorite channels. it allows you
fast switching between collected channels.
Up/left buttons
Short press: select previous channel
Select buttons
Long press: back to main menu
Short press: add/remove present channel from favorites folder
Down/right buttons
Short press: switch next channel
•The Fatshark build-in CH buttons can also used to select channel
www.owl-rc.com

Band Scan
Band Scan mode is very similar to channel mode. The difference is band scan
mode allows you swiftly change frequency between bands by short pressing
bottons. It also helps detect occupied channels or possible interference on
surrounding area.
Up/left buttons
Short press: Switch to previous bands
Select buttons
Long press: back to main menu
Down/right buttons
Short press: Switch to next bands
www.owl-rc.com

Finder
On Finder mode, the receiver will turn to search mode by using bottom Rx,
RSSI A(Top Rx is temporarily disabled)Therefore, patch antenna or any
directivity antennas is highly recommended for bottom Rx.
www.owl-rc.com
Up/left buttons
Long press: select previous band
Short press: select previous channel
Select buttons
Long press: back to main menu
Down/right buttons
Long press: switch next band
Short press: select next channel

Setting
Setting mode allows user to customized receiver accordingly to personal
preference.
Diversity: when OFF, receiver works with only one reception module
Insane: when OFF, owlrx will work as legacy diversity receivers
OSD Menu: when OFF, there will be no OSD on goggles's screen
OSD RSSI: when OFF, there will be no signal strength indicator on screen
- Digits (right side); - Digits (left side); - Small bars(right side); DGR DGL SBR
- Small bars(left side); - Large bars(right side); - Large bars(left side)SBL LBR LBL
FSK CH SW: when OFF, Fatshark built-in CH bottons will be disabled
FSK FAV SW: when OFF, Fatshark built-in CH bottons will be disabled ON
favorites mode only
Fav Lock: when ON, channels will not allowed to be removed from favorites list
Low band: when ON, more low band channels are available
Up/left buttons
Short press: select previous option
Select buttons
Long press: back to main menu
Short press: enter/confirm
Down/right buttons
Short press: select next option
www.owl-rc.com