OWLink FO2800 User manual

TX (Transmitter) Installation
OWLink FO TX2800
Power IR
OUT
DLI HDMI
IN
OWLink FO TX2850
Power IR
OUT
DLI HDMI
IN
Audio
IN
USB to PC
STEP 1: Connect Video Source to FO 2800 TX/ FO 2850 TX
DVD player video source
Connect HDMI to DVD Connect HDMI to FO 2800 or FO 2850 TX
Connect DVI to PC Connect PC to FO 2800 or FO 2850 TX using DVI to
HDMI cable
1-A: Connect DVD, STB, Video Game Box to TX
1-B: Connect PC to TX
Connect IR emitter to
FO 2800 TX / FO 2850 TX
Locate IR sensor on DVD
or other source device
(* You may use the remote
control to locate the IR
sensor )
Stick IR emitter on DVD
or other source device
sensor
STEP 2: Connect IR emitter to source device
(Option: for FO 2850 only)
STEP 3: Connect Stereo Audio source to FO 2850 TX
DVD player Stereo Audio source
Connect stereo audio cable
to DVD or other audio source
Stereo (red / white)to mini
jack cable
(not provided)
Connect audio source to
FO 2850 TX using stereo
mini jack cable
*Note: Audio source does not need to be the same as video source ex; iPOD, XM radio
STEP 4: Connect PC Stereo Audio to FO 2850 TX
Connect stereo audio
cable to PC
Connect PC audio to FO 2850 TX
using stereo 3.5mm mini to mini
cable
STEP 5: Connect PC USB to FO 2850 TX
Connect USB cable to PC Connect USB cable to FO 2850 TX
STEP 6: Connect power
Connect power to FO 2800/ FO 2850
RX (Receiver) Installation
OWLink FO RX2800
Power IR
IN
DLI HDMI to
HDTV
OWLink FO RX2850
Power IR
IN
DLI HDMI to
HDTV
Audio
OUT
K/M
STEP 1: Locate and Secure FO 2800 RX/ FO 2850 RX to
the back of HDTV
Place RX near HDMI IN
connector and secure TX
by using sticker or velcro
Locate the HDMI IN
connector on the back
of HDTV
HDMI IN connector on the
back of HDTV
Peel off the protection
backing from the mounting
tape on the back of
FO 2800 RX /FO 2850 RX
STEP 2: Connect FO 2800 RX/ FO 2850 RX to HDTV
Connect FO 2800 RX/ FO 2850 RX to HDTV by using OWLInk 50 cm HDMI to HDMI cable
STEP 3: Connect IR sensor to HDTV
Connect IR sensor to
FO 2800 RX / FO 2850 RX Stick IR sensor on front of
HDTV
(Option: for FO 2850 only)
STEP 4: Connect FO 2850 RX Stereo Audio output to
speaker system
4-A: Connect FO 2850 RX stereo audio output to HDTV
Connect audio cable to
FO 2850 RX
Connect audio cable to
HDTV stereo audio input
4-B: Connect FO 2850 RX stereo audio output to PC Speaker
system
Connect audio cable to
FO 2850 RX
Connect audio cable to
PC speaker stereo audio input
STEP 5: Connect FO 2850 RX to USB Keyboard /Mouse
Wireless USB Keyboard/ Mouse Connect wireless USB adapter
to FO 2850 RX
Wireless USB adapter
*Note: A Wired USB keyboard or mouse can also be used
STEP 6: Connect power
Connect power to FO 2800 RX / FO 2850 RX
Checking supplied items
FO TX / FO TX (Transmitter)2800 2850
FO RX / FO 2850 RX (Receiver)2800
2 OWLink HDMI to HDMI Cables
IR Emitter
IR Sensor
Transparent Fiber Optic Cable (30M) / spool
2 Power Adapters
Connectionswithimagination

Connect DLI Fiber Optic Cable™
STEP 1: Connect FO 2800 /FO 2850 TX and RX together
by using DLI Fiber Optic Cable™
Plan where to run DLI fiber optic cable to connect
RX to TX
™
TX RX
Connectionswithimagination
DLI Transparent Fiber Optic Cable™
*Note: DLI fiber optic cable provided
is 30 M in length. Longer
fiber optic cables are available
for purchase.
™
Remove dust cover cap
from one end of DLI
connector
™
Connect DLI fiber cable
to FO 2800 RX /FO 2850 RX
™
STEP 2: Connect DLI Fiber Optic Cable to FO 2800 RX /
FO 2850 RX
™
STEP 5: Make sure FO 2800 / FO 2850 TX and RX status LEDs
are in solid state ( not blinking )
Verify status LED on both TX and RX are solid
STEP 3: Secure DLI Fiber Optic Cable to the wall, ceiling,
or in the wall.
™
Secure the transparent fiber optic cable to the floor base board ...
STEP 4: Connect DLI Fiber Optic Cable to FO 2800 TX /
FO 2850 TX
™
Remove dust cover cap
from the other end of DLI
connector
™
Connect DLI fiber cable
to FO 2800 TX /FO 2850 TX
™
Run and secure the transparent fiber optic cable through the cracks of doors ...
Secure the transparent fiber optic cable to the wall and ceiling ...
by using tape , clear silicon, or other adhesive materials.
OWLink FO TX2800
Power IR
OUT
DLI HDMI
IN
DVD
IR
sensor
FO2800 Tx
HDMI
IR Emitter
IR Blaster
FO2800 Rx
HDTV
HDMI/HDMI
IR Sensor
Single fiber w/ DLI
connector
™
Single Room / Single Source Connection Diagram
OWLink FO RX2800
Power IR
IN
DLI HDMI to
HDTV
OWLink FO TX2850
Power IR
OUT
DLI HDMI
IN
Audio
IN
USB to PC
PC
FO2850 Tx
DVI /HDMI
FO2850 Rx
Single fiber w/ DLI
connector
™
USB
Stereo HDTV
HDMI/HDMI
Stereo
USB KeyBoard Mouse
OWLink FO RX2850
Power IR
IN
DLI HDMI to
HDTV
Audio
OUT
K/M
Multi Room / Multi Source Connection Diagram
DVD
STB
Video
Game
USB
PC
Multi Zone
A/V Receiver
HDMI
HDMI
HDMI
DVI /HDMI
HDMI Switch
4 Input/2Output HDMI
IR Out
Stereo
HDTV
HDMI/HDMI
Stereo
USB KeyBoard
Mouse
Single fiber w/ DLI
connector
™
HDMI
Stereo
Stereo
Stereo
Zone 2
Stereo
HDTV
HDMI/HDMI
Stereo
USB KeyBoard
Mouse
Single fiber w/ DLI
connector
™
USB
Zone 2
Bedroom/Home Office
IR Out
Zone 1
Stereo
To all devices
FO2850 Tx FO2850 Rx
FO2850 Tx FO2850 Rx
Zone 1
Living/Family Room
*
IR Connecting
Block
*
IR Connecting
Block
*Compatible w/ XANTECH
( )
IR Sensor
IR Sensor
STEP 3: Secure DLI Fiber Optic Cable to the wall, ceiling,
or in the wall.
™
Secure the transparent fiber optic cable to the floor base board ...
STEP 4: Connect DLI Fiber Optic Cable to FO 2800 TX /
FO 2850 TX
™
Remove dust cover cap
from the other end of DLI
connector
™
Connect DLI fiber cable
to FO 2800 TX /FO 2850 TX
™
Run and secure the transparent fiber optic cable through the cracks of doors ...
Secure the transparent fiber optic cable to the wall and ceiling ...
by using tape , clear silicon, or other adhesive materials.