Oypla GARDEN 3603 User manual

Page 1
Manual Version: v1.0
Model Codes: 3603, 4031, 4034
Oypla.com LLP / www.oypla.com
User Manual
Model Code: 3603,
4031, 4034
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
4Back Cover
End
Folding Garden
Cart
Colour May Vary

Page 2
Manual Version: v1.0
Model Codes: 3603, 4031, 4034
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
4Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
Never exceed the maximum load
capacity of 70kg, or it may result in
product failure and/or personal
injury.
Be careful when opening and closing
the folding wagon, it may cause
injury.
This product is not recommended for
the transportation of pets or people.
Do not leave children unsupervised if
they are using the folding wagon.
This product contains small parts that
could be a choking hazard if
swallowed. Keep these items away
from children.
Make sure all fastenings are tightly in
place and that everything is in order
before using the product. This should
be checked periodically by an adult.
This product is not a toy, and is only
to be used for its designated
purpose.
This product is intended for outdoor
use only.
Only use this product on stable, flat
and dry land.
Do not carry out alterations or
modifications to this product.
Leaving the product outside exposed
to weather, especially direct sun and
rain, will speed the weathering
process. This can be slowed by
removing the product from these
conditions.
Do not discard any of the packaging
until you have checked that you have
all of the parts and fittings required.
Use the correct fixings as indicated.
Do not tighten any of the nuts until
the unit is completely assembled,
then finish by tightening all nuts. All
nuts must be tightened before use.
If the product is damaged or has any
defects, please contact
[email protected]om.
⚠Do not exceed the maximum load
capacity of 70kg. Overloading, may lead
to personal and/or product failure
Warnings
⚠This product contains small parts
which could be a choking hazard. Keep
these parts away from children.

Page 3
Manual Version: v1.0
Model Codes: 3603, 4031, 4034
Oypla.com LLP / www.oypla.com
Parts List:
-If you are missing any of the below parts, please contact [email protected]
-Please be aware that you will be referring to this parts list throughout the assembly
process.
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
4Back Cover
End
Assembly Instructions
A. Plastic Clip [1pc]
B. Wheels [4pcs]
C. Frame [1pc]
D. Canvas Bag [1pc]
E. Screws [4pcs]
F. Washers [4pcs]
G. Nuts [4pcs]
H. Small Screws [2pcs]
Tools Needed:
Screwdriver
Adjustable wrench
1. Unfold the frame and turn it upside down, to allow for easier assembly
of the wheels.
2. Put the wheels into the wheel bracket by using the screws, washers and
nuts provided. Tighten the screw fully and then loosen one half turn for
easier wheel movement. Turn frame back round so the wheels are on the
floor.
3. Attach the plastic clip to the centre of the frame by using the 2x small
screws.
4. Place the canvas bag onto the frame. The handlebar of the canvas bag
must be through the iron handle. To secure the canvas bag, stick the
Velcro flaps together.
5. Attach the handle to the middle of the plastic clip.

Page 4
Manual Version: v1.0
Model Codes: 3603, 4031, 4034
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
4Back Cover
End