Oypla GARDEN 4051 User manual

User Manual
USER MANUAL Model No: 4051
Lawn Trimmer

•This product is not a toy, and is only to be used for its designated purpose.
•Never carry out any alterations or modifications to this product.
•This product is intended for outdoor use only.
•This product includes small parts that could cause choking.
•When using the product, use both handles to assure the product remains stable.
•Leaving the product exposed to weather, especially direct sun, rain and salt air,
will speed the weathering process. This can be slowed by removing the product
from these conditions, or covering it with a suitable cover.
•This product is not intended for use by persons (including children) with reduced
physical, sensory and mental capacities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
product by persons responsible for their safety.
•Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
•If the product is damaged or has any defects, please contact cs[email protected]
USER MANUAL Model No: 4051
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.

Please retain a copy of all instructions for future consultation.
USER MANUAL Model No: 4051
Operating Instructions
Parts List
Bottom frame x 1
Top frame x 1
Edging blade x 1
Bolt x 1
Butterfly nut x 1
Cap nut x 1
Washer x 2
Assembly Instructions
•Fit the bottom frame inside the top frame.
•To secure, push a bolt through the hole and secure it in place using a
washer and the butterfly nut.
•Slide the edging blade onto the end of the bottom frame, ensuring it
is all the way down the side pole. Secure this in place using a washer
and a cap nut.
User Instructions
•Wheel the Lawn Edger along the edge of your lawn, and the steel
blade trims the over-hanging grass as you go.
•After use clean edging blade with care, wipe clean only.
•For best results use against a hard edge such as paving and decking.
•Care & practice may be needed when using against flower beds &
soft edges.