OYPLA Home 3846 User manual

User Manual
5 Tier Kitchen Storage
USER MANUAL Model No: 3846

Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
•This product is not a toy, and is only to be used for its designated purpose.
•Never carry out any alterations or modifications to this product.
•This product is intended for indoor use only.
•Do not exceed the maximum shelf load capacity of 40kg or the overall load
capacity of 160kg. Doing so may cause the product to break.
•Only use the product on stable, level and dry ground.
•When moving the product be sure that the path is clear of obstacles to avoid
damaging the product or causing personal injury.
•Do not stand on any of the shelves if you can’t reach an item. This will damage the
product and risks breaking the shelf being stood on.
•Before using the product, make sure all fastenings are tightly in place and that
everything is in order, and checked periodically by an adult.
•Leaving the product outside exposed to weather, especially direct sun, rain and
salt air, will speed the weathering process. This can be slowed by removing the
product from these conditions, or covering it with a suitable cover.
•Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
•If the product is damaged or has any defects, please contact [e-mail]
USER MANUAL Model No: 3846

Part Number
Part Name
Quantity
1
Foot
4
2
Pole
8
3
Interlocking Shelf Sleeves
42
4
Shelves
5
Assembly Instructions
Parts List:
If you are missing any of the below parts please contact [e-mail]
Please be aware that you will be referring to this parts list throughout the assembly
process.
USER MANUAL Model No: 3846

1. To begin, take one foot and one pole and screw the foot
into the pole. Ensure that the foot is secured correctly by
tightening it into place fully. Repeat this step for each leg,
making sure all are secured as they should be. Please see
below example of the foot secured into the pole.
2. Once all feet have been attached, grab one pole and attach it on top of the
poles made in the previous step, this should screw on to attach. Make sure it
is fully secured on before moving on. Repeat this with the remaining poles.
Once built up grab two interlocking shelf sleeves and snap them together in a
position where you would like a shelf to be placed. Make sure they are placed
the correct way, this can be seen by the direction in which the arrow points as
well as the word “TOP”. Please see example to the right.
3. Push a shelf down the pole and onto the interlocking shelf
sleeve, ensuring that it goes as far down as possible. Once
this is done repeat this step and the step previous to
continue building the product. Once all shelf sleeves and
shelves have been fixed, please ensure all shelves are
checked fully and that they are as secure as possible before
using the product (applying items onto the shelves.
USER MANUAL Model No: 3846

Imported by Oypla.com LLP, Uxbridge, UB8 2FX
USER MANUAL Model No: 3846