Oypla Leisure 4517 User manual

User Manual
USER MANUAL Model No: 4517
Single Keyboard Stand

Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
•This product is not a toy, and is only to be used for its designated
purpose.
•Never carry out any alterations or modifications to this product.
•This product is intended for indoor use only.
•This product contains small parts that could be a choking hazard if
swallowed. Keep these items away from children.
•If at any time during the activity you feel faint, dizzy, experience pain, stop
and consults your physician or doctor.
•Only use the product on flat stable ground.
•Before using the product, make sure all fastenings are tightly in place and
that everything is in order, and checked periodically.
•Pinch points can cause personal injury.
•Do not discard any of the packaging until you have checked that you have
all of the parts and fittings required.
•Clean only with a damp cloth. Do not use strong industrial cleaning
substances or abrasive materials as these will damage the product.
•If the product is damaged or has any defects, please contact
[e-mail]

Part Name
Picture
Quantity
Left Base (Fig.1a)
1
Right Base (Fig.1b)
1
Left Keyboard Rest (Fig.2a)
1
Right Keyboard Rest (Fig.2b)
1
X-Brace (Fig.3)
1
Bolts (Fig.4)
8
USER MANUAL Model No: 4517
Assembly Instructions
Parts List:
Please check you have all parts below before attempting to assemble this product.
If you are missing any of the below parts, please contact Oypla customer services:
[email protected]om
USER MANUAL Model No: 4517

Allen Key (Fig.5)
1
Rubber Strap
2
USER MANUAL Model No:
USER MANUAL Model No: 4517
Please note, bolts may come screwed into the ends of the X-Brace. Using the Allen key provided ensure
that all bolts are removed before assembly.
Step 1.
Firstly, take Fig.1a and Fig.1b and align the holes at the
bottom of the X-Brace (Fig.3). Then using four bolts (Fig.4)
attach Fig.1a and Fig.1b to the bottom of the X-Brace
Step 2.
Next, take Fig.2a and Fig.2b and align the holes at the top of
the X-Brace (Fig.3). Then using the remaining four bolts
(Fig.4) attach Fig.2a and Fig.2b to the top of the X-Brace
(Fig.3).
Step 3.
Now the stand is assembled, use the lever on the X-Brace
(Fig.3) to adjust to the desired height position.
Step4.
Now Glue Ring.

USER MANUAL Model No: 4517