Paasche Airbrush HB-16-2F User manual

Paasche Airbrush Co
INSTRUCTION MANUAL
SPRAY BOOTH HB-16-2F
Thanks for purchasing our spray booth HB-16-2F
and please read this Instruction Manual carefully
and thoroughly before operating the spray booth
to receive optimum results.

2
Features:
1. The spray booth can be folded for storage and is light weight
2. Dual Fans provide higher air flow.
3. High density filter removes paint particulate and fumes are exhausted out the
duct work.
4. Includes on/off switch that is lite when operating. Low noise, about 45 db.
5. A small turntable is included.
HB-16-2F
160 CFM
115 Volts, 60 Hz
9 lbs
16”W x 8”D 10.5”H
16”W x 16”Dx 10.5”H
Specification:
Model:
CFM:
Input:
Net Weight:
Packed Dimensions:
Assembled Dimensions:
Components:
1. Booth Body
2. Fan
3. Connector Fan Duct
4. Air Duct Fasten Buckle
5. Duct
6. Connector For Cord Adapter
7. Switch
8. Duct Head
9. Handle
10. Magnet
11. Paint Filter
12. Upper Left Cover Board
13. Bottom Left Cover Board
14. Front Floor Board
15. Turntable
16. Rubber Feet
17. Bottom Right Cover Board
18. Upper Right Cover Board
8
13
3

Set-up Instructions:
3
1. Release the latch and
drop down the work table
of booth. Fold out right and
left side to complete work
space.
5. Attach the duct head to
duct hose
2. Fix the duct adapter to
the back of the spray
booth then Connect the
duct to the duct adapter.
3. Lock on the duct by
tightening the fasteners 4. Extend the hose
7.Plug in the cord adapter
and connect plug to power
outlet with ground. Then
turn switch to on.
6. Complete

Safety instructions and hazard warnings
Please read the entire operating instructions before using the product for the first time. They
contain important information about the correct operation. The guarantee/warranty will be
void if damage is incurred resulting from non-compliance with the operating instructions.
Liability for any and all consequential damage is excluded!
We do not assume any liability for damage to property or personal injury caused by improper
use of or the failure to observe the safety instructions, in such cases the guarantee/warranty
will be void.
•       

• The unauthorized conversion, modification or disassembly of the product is
inadmissible because of safety and approval reasons (CE).
• The product is not a toy and must be kept out of the reach of children. Particular care
must therefore be exercised if children are present.
• The product must not get damp or wet, it is only intended for use in dry, indoor locations
There is a risk of a fatal electric shock.
• Do not expose the product or its accessories to damp or extremely high or low temper-
atures.
• Dropping, falling, pressure or tensile forces could destroy or at least limit the function of
the product.
• ever position the device in the vicinity of combustible or easily inflammable materials,
e.g. Curtains!
• Always make sure that the rotary table on which the object is placed is located in the
center of the housing!
• The device should continue to run for approximately 2 to 6 minutes after each
application, this ensures the self-cleaning of the device!
• Always turn the device off and pull the main plug when the device is not in use!
• If the filter is contaminated with substantial amounts of paint, it will no longer work
efficiently and must be replaced with a clean filter.
• Always ensure proper ventilation!
•To not impair the extraction performance, you should keep the exhaust pipe as short
and straight as possible!
• If you have reason to assume that safe operation is no longer possible, disconnect the
device immediately and secure it against inadvertent operation.
•Always follow instuctions on your paint label. If paint mask is required it should be
worn while spraying in the booth
0" +!$ //1*$#0' 0/ %$,-$. 0(,+(/+,),+&$.-,//(!)$(%
- the device shows visible signs of damage
- the device no longer functions
- after a long period of storage under unfavorable
conditions or
- following heavy stress damage during
transportation
4
Paasche Airbrush Company
9511 58th Place Kenosha, WI 53144
Phone: [phone]
Website: paascheairbrush.com
E-Mail: [email protected]