Pace DC60Xu User manual

Pace plc
DC60Xu HD
HD DTA
Monday, June 25, 2012
Private & Confidential

Private & Confidential
3
DC60Xu HD DTA

DC60Xu HD DTA
Overview
High Definition adapter for encrypted services
•Simple channel up/down via RCU
•Channel 3/4 RF output
•MPEG 4 and MPEG 2 Compatible
•No IR Receiver –RF Remote Capabilities
•No Out-Of-Band signaling
•No Pay Per View
•No Video On Demand
•No Program Guide
•No RADD impact
•No Premium Channels
Private & Confidential
4

DC60Xu
Accessories
Private & Confidential
5
External Power Supply
•Narrow design does not take up multiple sockets on a power strip
Remote Control Unit (RCU)
•IR and RF compatibility, no IR Receiver is needed. RF functionality allows the HD DTA
to be out of sight and still have full remote control functionality
•AA Batteries included
Cables
•HDMI Cable included
•Coaxial Cable included

DC60Xu Front and Rear Panels
Private & Confidential
6

DC60Xu Remote Control
RF Remote Pairing

DC60Xu Remote Control
•The HD DTA supports both IR and RF remote control commands
•RF functionality will pair the remote to a specific TV and that TV only
•For RF remote functionality the remote must be paired to the TV
•Currently the DC60Xu HD DTA is the only Pace device that supports RF remote
functionality (RF remote functionality is currently only supported on the DC60Xu HD
DTA)
Private & Confidential
8

DC60Xu Remote Control
RF Pairing
•The DC60Xu remote control will not be paired to the HD DTA in the SIK.
•For RF Pairing follow the steps below
•Press and hold the Setup Key until the All Power LED turns green then release
•Press and release the Menu Key rapidly (up to 5 times) until the Remote Control
Pairing overlay appears
•Enter the three digit code that is displayed
•Once the DC60Xu is paired you will see Success overlay appear –press OK to
complete the process
Private & Confidential
9

DC60Xu HD DTA Setup Menu