Pacific Living 22.001.xx User manual

Pedestal Fireplace
22.001.xx
Assembly Instructions
Page 1 of 5

.Model Number 22.001.xx
Assembly Instructions
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small
parts which may have come loose inside the carton during shipment. Separate, identify, and count all
parts and metal hardware. Compare with parts list to be sure all parts are present.
WARNING: This fire place is heavy in weight. You must use 2 persons to assemble safely. Use caution
when inserting body onto hearth (step 1) and hood onto body (step 4) to avoid injury of fingers.
Important Note : Follow instructions listed below in the proper sequence as numbered to assure fast,
easy and correct assembly.
Failure to assemble this fireplace in its entirety voids the warranty.
PARTS
(A) BODY (1) (E) BACK INSULATOR (1)
(B) HEARTH (1) (F) LOCKING CLIPS (2)
(C) BASE INSULATOR (1) (G) HOOD (1)
(D) SIDE INSULATOR (2); a. RIGHT INSULATOR (H) SPARKARRESTER (1)
b. LEFT INSULATOR ( I ) GRATE (1)
ILLUSTRA TION
(A) (B) (C) (D.a) (D.b) (E)
(F) (G) (H) (I)
WARNING : Do not overload grate with firewood
WARNING : Do not overload firebox with firewood
Page 2 of 5

Do not apply stress
to corners.
Lift from center
STEP 1 : Insert Body onto Hearth
Body (A)
Hearth (B)
FRONT
FRONT
STEP 2 : Insulator System Installation
Base Insulator (C)
This step will require 2 people. With one person holding the rear top of body and another person raising the body from front.
Have the third person insert the liner base into the fire box.
INSERT
Page 3 of 5

(E)
Back Insulator (E)
(D)LEFT (D)RIGHT
BACKSIDE
Important : All side labeled “BACKSIDE” must face inside walls of
fireplace body. The unit will not assembly correctly if this
is not done.
BACKSIDE
BACKSIDE
BACKSIDE
BACKSIDE
BACKSIDE
Side Insulator (D)
Page 4 of 5

STEP 4 : Insert Hood onto Body
Hood (G)
Spark Arrester (D)
Grate (E)
STEP 3 : Installing The Lock Clips
Hardware:
Locking Clips (F) : 2 pcs
Page 5 of 5