
Start here.
1. Read all safety instructions.
Commit to always wearing a life jacket and making safety a priority on the water.
2. Ensure all items are in the box. What’s in the box?!
x1 Play Paddle Board
x1 SUP Carry Strap
x3 Universal Fins
x1 Aluminum SUP Paddle
x1 Manual Pump
x1 Repair Kit
x1 User Manual
3. Ensure valves are tight.
Take the valve wrench from the repair kit and ensure the air fill valve and the pressure
relief valves are tight. Typically, once a year you may need to re-tighten valves with the
wrench. Warning: Never completely unscrew the valve.
4. How to Inflate / Deflate the Producy.
- Unscrew the valve cap and push the center button so it is in the up position.
- Connect the hose to the pump and then to the product.
- Pump until desired pressure is reached (10 - 18 PSI).
- The product has a max capacity of 18 PSI. The pressure regulator will activate and
slowly let air out if max capacity is ever reached.
- Deflate the product by unscrewing the valve cap and pressing the center button so it
is in the “down” position. Dry off the product before deflating.
Optional: The manual pump does vacuum the air out by switching the hose connector
to deflate on pump.
5. Install the Fins.
The x3 fins slide into the fin boxes. The two smaller, thruster fins go on the outside and
the center fin is the larger 10’’ fin. It only fits in one way and there are no tools required.
Just slide the fin into the fin box and put the locking pin in place.
6. Storing the Product inflated or deflated is acceptable.
Ensure the product is stored in a dry environment, where it will not be exposed to
moisture, freezing or thawing.
7. Explore Paddle Challenges
Paddle North has a library of over 20 unique challenges to do with your Play paddle
board. Explore them at: paddlenorth.com/collections/paddlechallenges