
1. Screw the four legs to the frame.
2. Attach the cast burner by pushing the rear flap
downwards.
3. Slide ½ air sleeve over air inlet so that flame burns blue
with one turn of valve and, on Model 3030 and 30301,
squeeze sleeve to fit pipe.
4. Mount the basic valve without the seal and fix it with
the lock nut.
5. Connect appropriate gas hose (max. 1.5 m) and gas
pressure reducer (not included in delivery).
6. Thickness adjustment only possible in the 1st
revolution. Further turns do not bring more heat,
because it is a needle valve.
7. Tighten all screws and perform a leak test before first
use.
Example images may differ from the product
WITHOUT IGNITION FUSE
Item. No. 3030/4040
Basic valve without ignition protection.
Pre-assembled with union nut
Item no. / Model
Hockerkocher Gas stove
3030+30301 / 4040+40401
CA-SGB-05 / CA-SGB-07
1336-21 Pin No. 1336DL004 / EN497:1997
Gas Kat. I3B/P (50mbar) & (*30mbar)
Butane/Propane and your mixture
Land: DE/AT/CH/SK/ and other EU countries
Power KW - Consumption g/h
4,0Kw-291 g/h / 7,0Kw-509 g/h (50)
3,5Kw-291 g/h / 6,5Kw-509 g/h (*30)
Nozzle size 0,9 mm
*330mbar only for use in conjunction with
recreational vehicles and boats! Here the gas
consumption and power is reduced.
For outdoor use only Art. No. 30301 & 40401 with ignition fuse in well ventilated rooms.