8
Scan and Playback
Scanner Setting
1. Press MENU(MENU ) button to enter the
scanner setting menu.
2. Press LEFT( )/RIGHT( ) button to
select Scan ( ) or Setup ( ) .
3. Press UP( )/DOWN( ) button to
select an option from the submenus.
Note: Press MENU(MENU ) button
repeatedly to go to the upper level,
or exit the Scan menu.
Menus Sub-menus Descriptions
Scan( ) Color Mode( )Selects a scan mode:
Gray( ), Color( ).
Color Optimum( )This function provides a color
optimization mechanism which
will achieve the best color match
possible based on the actual color
content of the image.
Note 1: Scanning will take longer
than normal with this
setting. Please be patient
and wait until the process is
finished.
Note 2: This setting is set to its
default of “OFF” after the
scanner is restarted.
Setup()Language( ) English, German, French, Italian,
Spanish, Dutch, Portuguese, Polish.
Format( ) Deletes all the data stored in the
SD/MMC card.
Calibration( )Select “OK” to calibrate the scanner.
Note: Refer to page 14 for detailed
procedures.
Factory Default( )Restores the scanner settings to the
default settings.