Palm Garden WBT432 User manual

WBT432
Bluetooth AV / HCI Dual Mode Dongle
User Manual
Version 1.0
PALM GARDEN ENTERPRISES CORP..

Index
Bluetooth Introduction................................................................. 1
Package List.................................................................................. 2
AV / HCI Dual Mode Dongle .........................................................2
AV / HCI Dual Mode Dongle Features .......................................................2
AV / HCI Dual Mode Dongle Outline..........................................................3
How to Use.................................................................................... 4
Before You Use..........................................................................................4
AV Mode ........................................................................................ 5
Enjoying the Superior Music Quality..........................................................5
HCI Mode ....................................................................................... 6
BlueSoleil Installation.................................................................................6
1. Setting Up / Prerequisite........................................................................6
2. Starting to Use BlueSoleil ......................................................................6
3. Available Services..................................................................................7
Specification – Bluetooth AV / HCI Dongle............................... 16
FAQ .............................................................................................. 17

PALM GARDEN ENTERPRISES CORP.
1
Bluetooth Introduction
Bluetooth is a global wireless standard for enabling short-range wireless
connections. It is a simple and instant radio solution that allows different
devices to talk to one another. Bluetooth eliminates the need for
cables/wires/cords between devices such as mobile phones and headphones.
Bluetooth facilitates fast and secure transmissions of both voice and data
between devices even if they are not in line-of-sight. Most Bluetooth devices
are described as 'Class 2'. These are very low power and have a range of
about 10 meters. Some devices are Class 1. These have range comparable to
that of Wi-Fi and have a range up to 100 meters.
A limited, but growing number of devices use Bluetooth at present. Devices
that are starting to have Bluetooth connectivity built in include:
• Headsets
• Headphone
• Cell Phones
•PDAs
•Laptops
•Digital cameras and camcorders
•Printers
•Scanners
•Keyboards and Mice
•In-car handsfree kits
•GPS navigation receivers
•Home appliances (microwaves, washers, driers, refrigerators)
In addition, add on Bluetooth adapters are available for computers (i.e. with a
USB interface) and for PDAs.

PALM GARDEN ENTERPRISES CORP.
2
Package List
The following checked items should be in the package.
Items Quantity
Bluetooth AV / HCI Dongle 1
CD with Software 1
AV / HCI Dual Mode Dongle
Thank you for choosing the AV / HCI Dual Mode Dongle. It is unique and
different from most Bluetooth products in the market for its good integration of
Bluetooth profiles. It is a multifunctional device that provides PC users with
dual capability to listen to the music or transfer data wirelessly with a
Bluetooth headset.
AV / HCI Dual Mode Dongle Features
AV Mode
zPlug and Play – You don’t need to install any software or change any PC
settings to use it. Just switch the dongle to AV mode and plug in the PC
USB port.
zSuperior audio quality - Delivers 44.1 kHz and 48 kHz, 16 bit stereo music
(near CD quality audio).
zWireless mobility – It is very convenient without being restricted by cables.
zNo “Line-of-sight” restriction - Unlike infrared devices, it offers you a wide
transmission range (up to 10 meters).
zListen to music and respond to phone calls – If you have a Bluetooth
stereo headset and a Bluetooth enabled cell phone, you can use the
scenario. It enables switching between music and calls made to your cell
phone.
zSupported profile - Supports A2DP profile of the Bluetooth specification.

PALM GARDEN ENTERPRISES CORP.
3
HCI Mode
zAfter install the IVT BlueSoleil software, it can provide various wireless
network applications such as audio transfer, file transfer, network access,
dial-up networking, and so on.
zAfter installation, you can use the Bluetooth receiver to listen to the
music or access the Internet Telephony service.
AV / HCI Dual Mode Dongle Outline
3.5m/m Phone Jack
AV/HCI Select SW
USB Male Connector
HCI-----OFF-----AV

PALM GARDEN ENTERPRISES CORP.
4
How to Use
A Bluetooth stereo headset performs well with the AV / HCI dual mode dongle
and can be used to demonstrate the following usage scenarios.
zAV Mode: Switching between music and cell phone calls (Bluetooth stereo
headset required)
A Bluetooth stereo headset can switch between listening to music
streamed from the dual mode dongle and answering calls made from
Bluetooth enabled cell phones.
zHCI Mode: Need to work with BlueSoleil software. Besides switching
between music and cell phone calls, it can be used for data transfer.
Before You Use
AV-HCI dual mode dongle doesn’t need to be charged before using. But it
requires PC Operation system is Windows XP or Windows 2000 with USB
Port 1.1 or 2.0.

PALM GARDEN ENTERPRISES CORP.
5
AV Mode
Enjoying the Superior Music Quality
Find a Bluetooth stereo headset. Switch the AV / HCI dual mode dongle to AV
mode, plug it into a USB port and play music from PC. Let the music be
streamed to the Bluetooth headset. Users can also use another Bluetooth
enabled device that minimally supports the A2DP profile of the Bluetooth
specification, version 1.1 to play music.
Before using the headset to listen to music, you should turn off the PC music
player and make a music connection as follows:
1. Setting Up / Prerequisite
When the dual mode dongle is in AV mode, the status LED indicator on the
dongle will flash quickly and search for the headset.
2.Connecting the dual mode dongle with the headset
(1) The dongle will automatically pair with the headset.
(2) When the pairing is done, the status LED indicator on the dual mode
dongle will flash slowly.
(3) Play music from PC. You can hear music from the headset.
*Note:
1. Please refer to the user manual of the Bluetooth stereo headset first
for pairing instruction.
2. It may take you a few seconds in paring the dual mode dongle with
the headset for the first time.

PALM GARDEN ENTERPRISES CORP.
6
HCI Mode
BlueSoleil Installation
1. Setting Up / Prerequisite
(1) Please make sure your computer is using windows operating system
98SE/ME/2K/ XP or later.
(2) Put the companion CD in the CD-ROM. Find the folder “BlueSoleil” and
open it.
(3) Find the “Setup” file and double click it.
(4) Choose the language version and follow the instruction to complete the
installation.
(5) Reboot your system.
2. Starting to Use BlueSoleil
(1) Set the AV /HCI dongle to HCI mode. Plug it in a USB port of a PC.
Double click BlueSoleil icon and start to use the
software.
(2) Name your AV / HCI dongle.

PALM GARDEN ENTERPRISES CORP.
7
(3) If you want to change your name, please click “My Bluetooth” menu and
choose “Device Properties”. Enter a unique device name in the “Device
Name” field.
(4) The orange ball in the middle of the screen stands for your own AV / HCI
dual mode dongle. When you want to search for Bluetooth devices around,
you need to press the ball. You can also click “View”>”Refresh Devices” to
find new devices.
3. Available Services
Listening to the Music
(1) Find the Bluetooth receiver and turn on it.
(2) Use BlueSoleil to discover it.
(3) After you discover the receiver, the address below the icon is its BD
address. You need to click “Refresh Service” again and the name is
changed to the device name.

PALM GARDEN ENTERPRISES CORP.
8
(4) Right click the device icon and make sure if there is any services available.
If not, you need to refresh it until some service icons (i.e. headset and AV)
are turning to yellow. Those yellow icons indicate the available services
for you to use.
(5) To listen to music, you need to choose” Bluetooth AV Service” or click the
icon that is second from the right. After the connection being established,
you can find a link shown between the receiver and AV / HCI dongle.

PALM GARDEN ENTERPRISES CORP.
9
(6) After setting up the BlueSoleil, you need to launch Windows Media Player
to play music. You can hear music from the receiver shortly. Please note
that you need to launch BlueSoleil first, then go for Windows Media
Player.
(7) If you don’t hear any music, please check FAQ for more details.
(8) To disconnect the device, right click the device icon then select
“Disconnect”>”Bluetooth AV Service”.
(9) To leave the program, please click “File” >”Exit”.

PALM GARDEN ENTERPRISES CORP.
10
Switching Between Music and Phone Calls
1.Setting Up / Prerequisite
Find a Bluetooth receiver. Please confirm the receiver has been added to a
list of “Paired Device” in the Bluetooth enabled cell phone.
*Note:
1. If you haven’t paired the receiver with the Bluetooth enabled cell
phone before, please refer to the user manual of the receiver.
2. Some cell phones require that an explicit connection be established
with the receiver. For example, Nokia 3650 requires a Bluetooth
connection to the receiver be initiated and stay connected before
proceeding further. Other phones may initiate a Bluetooth
connection only when a call is received. Please refer to the user
manual of the cell phone being used and fully understand its
behavior.
3. Some cell phones send the ring indication to the receiver while
others do not. If your cell phone supports this feature, you should
hear the ring tone of your cell phone on the receiver. Phones that do
not support ring indication will automatically accept the call.
2. Making the Switch
(1) Repeat the procedure ”Enjoying the Superior Music Quality” and play
music.
(2) Use the cell phone and find the receiver on the “Paired Device” list. Then,
operate the cell phone to connect to the receiver.
(3) When the connection is set up, the music will pause and you can switch to
the cell phone mode automatically. You can start to make an outgoing call
and are able to converse over the phone.
(4) When your conversation is done and you stop using the cell phone, the
streaming of music will resume immediately and automatically.
(5) If someone calls you, the music will pause and you can answer the
phone.
(6) After the phone call ends, the music will resume again.
(7) You can repeat this scenario and switch freely between cell phone and
music mode.

PALM GARDEN ENTERPRISES CORP.
11
3.Turning Off
If you don’t want to use AV / HCI dongle, please turn it off.
Using Internet Telephony
1.Setting Up / Prerequisite
Please confirm the computer has installed Internet telephony software. Make
sure the Bluetooth receiver is not connected with any other Bluetooth device.
2. Getting started
(1) Double click BlueSoleil icon to launch the software.
(2) Power on the Bluetooth receiver.
(3) Operate BlueSoleil to do a search to find the Bluetooth receiver.
(4) Right click the device icon and choose “Refresh Services”. You can also
click “View”>”Refresh Devices”.
(5) Right click the device icon. Choose “Connect”>”Bluetooth Headset
Service” or click the first-from-the-right icon.
(6) After the connection is being successfully made, you can then find a link
added between the receiver and AV / HCI dongle. While hearing a ring
tone from the receiver, please press the jog-dial button on the volume key
to answer it. Then the connection is made.

PALM GARDEN ENTERPRISES CORP.
12
(7) *Note:
1.After 25 seconds without answering it, it will stop ringing and system
will disconnect automatically. Please repeat the set up procedure to
proceed.
2.You can not connect to Bluetooth enabled cell phone when you are
using Internet telephony.
Connecting to MSN
(1) Launch MSN Messenger. Choose ”Audio / Video Tuning Wizard”.
(2) Set “Microphone” and “Speaker” to “Bluetooth Audio”.
(3) Follow the procedure and end up setting.
(4) Start to use MSN with the Bluetooth receiver.

PALM GARDEN ENTERPRISES CORP.
13
Connecting to SKYPE
Start SKYPE. You don’t need to do any setting for using the Bluetooth
receiver. Please make sure you have done with the prerequisite.
*Note: If you still can’t use the receiver, please go to
“File”>”Options”>Hand/Headsets. Keep the settings as below.
Using Cell Phone Services
1.Paired with the cell phone
(1) Find a Bluetooth enabled cell phone.
(2) Use BlueSoleil to find it.
(3) Right click the cell phone icon and choose “Refresh Services”. You can
also click “View”>”Refresh Devices”.
(4) You can find the available services showed as yellow icons.
(5) Choose the service you want to use.
(6) Before you choose any services, you need to pair with the cell phone first.
You should enter the passkey in the cell phone. Usually, it’s “0000”. Then
enter the same PIN code in the key column in BlueSoleil.

PALM GARDEN ENTERPRISES CORP.
14
2.File Transfer
After pairing with cell phone, you can exchange the files in the cell phone
with those in the PC.
3.Object Push
Choose the “Object Push” function to put the information in the PC to the
cell phone.

PALM GARDEN ENTERPRISES CORP.
15
4.Information Synchronization
Use the “Information Synchronization” function to sync the files with your
cell phone. So your files in the cell phone and your information kept in
Microsoft Outlook will be in sync.

PALM GARDEN ENTERPRISES CORP.
16
*Note:
The available services may differ due to different brands of Bluetooth enabled
cell phones. Please check the user manual of your cell phone.
Specification – Bluetooth AV / HCI Dongle
Product Name BluePacket Bluetooth AV / HCI Dongle
Standard Bluetooth 1.2 compliant
Power Class Class 2
Interface USB v1.1 (Type A)
AV Mode A2DP ProfileBluetooth Profile
HCI Mode Generic Access (GAP)
Service Discovery Application (SDAP)
Serial Port (SPP)
Dial-Up Network (DUN)
FAX
File transfer (FTP)
LAN Access (LAP)
Synchronization (SYNC)
Object Push (OPP)
Generic Object Exchange (GEOP)
Headset (HSP)
Hardcopy Cable Replacement (HCRP)
Human Interface Device (HID)
RX Sensitivity < 0.1% BER at -86 dBm
Output Power -6dBm to 4 dBm
Working Distance Up to 10 meters (in open space)
Note: The maximum operating range depends on
the paired phone model, battery power, and
environmental factors.
Frequency Band 2.400~2.4835GHz Unlicensed ISM Band
Modulation GFSK (Gaussian Frequency Shift Keying)
Spectrum FHSS (Frequency Hopping Spread Spectrum)
Operating Voltage Powered by USB port directly
Operating Temperature -10 ~ +55℃℃

PALM GARDEN ENTERPRISES CORP.
17
FAQ
1. Q : Why can’t I create a connection to the receiver?
A :
(1) Verify that the battery power of receiver is not running low.
(2) Check if the receiver is powered on and the AV / HCI dongle plug in the
USB port.
(3) Verify that the receiver is within the specified range of 10 meters from the
dongle.
(4) Check if any other Bluetooth device has connected to the receiver.
(5) Turn off the receiver and unplug the AV / HCI dongle device. Power on the
receiver and plug in the AV / HCI dongle and try connecting again.
2. Q : Why is the status LED indicator of AV / HCI dongle light up steadily?
A: When the AV / HCI dongle is on the cell phone mode, the status LED
indicator will light up steadily.
3. Q : How can I change the modes?
A: You can change AV mode to HCI Mode by the slide switch, and vice versa.
Dual mode dongle may probably malfunction when you "hot swap". If you
want to make a switch, please pull out the dual mode dongle and plug it in
the USB port again to make sure the successful switch.

PALM GARDEN ENTERPRISES CORP.
18
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause
undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions
for satisfying RF exposure compliance. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.