Panacom PAN830SKHD User manual

PAN830SKHD
COLOUR HD VIDEO INTERCOM

Missed call feature: when doorbell is not answered,
a notification icon will be shown.(note:Date/Clock
feature must be activated)
Different ringtones for Door A & Door B
7" TFT LCD touch screen aluminium front panel
Support 6 monitors, 2 door stations with extra 2 CCTV
Cameras and 2 PIR sensors
Digital Photo Frame (Read date From SD Card under
“user”)
Custom melody as ringtone
Support 32G TF card for pictures or video recording
IP 65 surface outdoor camera
Front of surface mount
camera PAN820SCHD
3
960P

NOTE: Default setting of door volume is already set as HIGH. Do not overturn
the volume regulator as it can easily be damaged.
To adjust the speaker volume of the door camera, remove the weather seal at
the back of the door camera and adjust the regulator with a screwdriver.(refer
to outdoor camera specification for regulator location)
Door Speaker Volume Adjustment

External switching power supply (DC 12V)
Yes (Read date from SD card)
AHD & CVBS only
Digital Photo Frame
CCTV camera input
Yes (Read date from SD card)Custom Melody
Missed call indicator. Clock function needs to be activated.Missed Call
Motion picture recording when SD card installed (SD card not supplied)
Motion Detection
(1024 x 600)

First monitor must be set as
MASTER. All other monitors
must be set as SLAVE. This
can be done in the SETTINGS
menu.
MONITOR ID SETTING
Master=01, Slave=02 to 06
Note:
HD Monitor can accept AHD or CVBS
analog signals. If using HD monitor with
CVBS analog door station, you must
reboot the monitor from the menu
system after connecting the camera.

Note:
CCTV cameras to be
AHD or CVBS only

23456
keep pressing transfer call
button to activate the function
of call transfer to the
extension which you
choose
Select a extension which
you want
The called slave monitor
will get ring tone
2 3 4 5 6

1.0 STANDBY MODE
1.1 Clock and date Mode
1.2 Digital Photo Frame Mode
There are 2 mode options during standby mode: Clock and date mode or digital
photo frame mode.
When digital photo frame is activated, motion detection feature will be deactivated.
The system will automatically detect pictures from SD card.
If no insert SD card is inserted, this function will not operate.
1. When digital photo frame function is activated, the monitor will automatically detect
pictures from SD card and start to play the files(picture scroll time can be adjusted
between 1-10s).
2. Two folders should be created in the SD card, “ring” and “user”. All music files should
be loaded in the “ring” folder. All picture & video files to be in the “user” folder.
3. If you missed a call, a “mail” icon will be shown on the top left side of the screen during
standby mode. Note: The clock function must be activated for this feature to operate.
NOTED:
00:23
13-02-2018
Tuesday

2.0 MAIN MENU
3.0 SYSTEM
3.1 Language
On standby mode, touch screen enter main menu. If no operation in main menu,
system auto back to standby mode after 60s. Click blank place back to standby
mode when stay on menu interface.
On main menu, pressing the SYSTEM button will access setup of language, clock,
system information, ring tone and volume.
Select any type of language and confirm back to main menu.

3.2 Time
3.3 System information
3.4 Ring
1).Select clock switch on/off during standby mode. (Note: if clock is switched off,
the digital photo frame not work)
2).Type of date, with three type format YY-MM-DD / MM-DD-YY / DD-MM-YY options.
Display: FW version, MCU, FW release date, Restart monitor, SD card rest capacity.
Enter ring menu to setup the outdoor station/s ring tone.
Notice: Support 32G Class 10 SD card.
Click “OK” to format the SD card, will pop-up window prompt
“Do you need to format SD card?” Choose “Yes” format the SD
card, after formatting would prompt “success”, choose “No”
cancel format.
[FormatSDcard]:

[Ring Vol1-3]:
[Mode]:
[Return]:
[Button Voice]:
From 0-10 level options, continue time 10-45S options.
Support switch on/off.
4.0 DIGITAL PHOTO
When this function is on, during standby mode it will start to play pictures from your
SD card.
Be sure the clock feature is switched on as well for this feature to function. Picture
scroll times can be set between 1-10s.
1.Make sure create name with “Ring” format file in SD card, and download music
inside, otherwise user defined ringtone will be failed.
2.Use user defined ringtone only show 100ringtone, exceed 100ringtone will auto
hide.
NOTED:
Default and user defined two mode. Default melody have 12 ringtone, user
defined select from SD card.
Back to superior menu.
3.5 Volume
Set three times parameter.
Noted: Volume setting means control monitor ringtone volume.

Enter MODE menu to enter setup menu for:
Enter Alarm setting.
5.0 MODE
6.0 ALARM
[Device_ID]:
[Door2 status]:
[Record mode]:
[Door1 unlock time]:
[Motion detection]:
[MD sensitivity]:
[Door2 unlock time]:
[Missed call]:
Indoor monitor ID number 01/02/03/04/05/06 options, “01” means
master monitor, “02-06” means slave monitor.
Switch ON if 2 doors are connected to system.
Record and snapshot mode options. If set it as record, when visitor
call from outdoor station, start to record; If set it as snapshot,
when visitor call from outdoor station, start to snapshot.
Unlock time 2-10s options, default 5s.
Door1, Door2, CAM1, CAM2, OFF options.
Motion detection sensitivity of door 1. doo2,cam1,cam2 can be
set with low, medium, high level, Low level: motion detection hard
to be activated. Medium level: motion detection easier to be activated.
High level: motion detection very easy to activated.
Unlock time 2-10s options, default 5s.
Switch on/off options. If switch on, outdoor station call monitor with no
answer, the monitor will show a mailbox icon on standby screen to show
you missed a call. This feature can only operate when using clock
mode on standby screen.
[Alarm record]: Two type options: recording or snapshot. If Cam 1 or 2 detect alarm,
monitor start to recording or snapshot picture save in SD card.
[MD duration]: Motion detection duration time can be set with 1~5minute.
Noted: Motion detection feature will not work when digital photo frame feature is used.
All digital photo frame pictures should be stored in folder name “user” in SD card.

1). On play music mode, press right side blank space move up or down adjust music
volume.
2).During play musics, through different icon switch play mode including once, shuffle,
order, repeat once, list of circulation.
Enter music, select to play list, interface including music list, play mode, play status.
7.1 Music
Enter media setting.
Media menu including: Music, Movie, Pictures, file (Only insert SD card can use media).
7.0 MEDIA
Noted: All music files to be created in folder named “ring” in the SD card.
Noted: Alarm time default 2Min.