Panacom SP-1776 User manual

PROFESSIONAL TROLLEY SPEAKER
Model No.: SP-1776
USER MANUAL

Top Panel
1. Display Screen
LED display screen.
2. Bass Knob
Use this knob to adjust the bass levels of master volume.
3. Treble Knob
Use this knob to adjust the treble levels of master volume.
4. Master Volume Knob
Use this knob to adjust the master volume.
5. Next Track
When in USB/SD Card/Bluetooth mode, press this button to go to the next track. When in FM mode, you
can press this button to go to the next stored radio station. To increase the Input Volume of USB/SD
Card/FM/Bluetooth/AUX, press and hold down this button for a few seconds.
6. 5+ Button
Press this button to select tracks greater than 5 in USB/SD Card mode. In FM mode, press this button
when selecting stored radio stations greater than 5.
Example
In order to switch to the 6th stored radio station, press “1” and then press “5+” to choose radio station No.6.
When in USB/SD Card mode, to select the 23rd track, press “3” and then press “5+” 4 times to
choose track 23. If you want to switch to the 101st track, you can press “1” and then press “5+” 20
times, or you can press “5+” 2 times and then press “1”.
P2

7. EQ Button
Press this button to turn the equalizer ON/ OFF. When the equalizer is off, the sound of master volume will
not be altered by the equalizer sliders. When the equalizer is on, the sound of master volume can be
altered by the equalizer sliders.
8. Guitar Input
9. Microphone Input
10. 1-5 Buttons
Press the corresponding button to switch to the corresponding track in USB/SD Card mode.
Press the corresponding button to switch to the corresponding stored radio station in FM mode.
11. Equalizer Sliders
Use the sliders to increase or decrease the respective frequencies. The equalizer sliders will only affect
the audio if the EQ Button is turned ON.
12. USB Input
Insert your USB flash drive into this slot.
13. SD Card Input
Insert your SD Card into this slot.
14. Repeat Button
When in USB/SD Card mode, press this button to select whether to repeat the current track or to repeat
all tracks.
15. Mode Selector Button
When there is NO USB or SD Card inserted into the unit, press this button to select any of the following
input modes: AUX/FM/Bluetooth.
When there is a USB or SD Card inserted into the unit, press this button to select any of the following
input modes: USB/SD/AUX/FM/Bluetooth.
16. Previous Track
When in USB/SD Card/Bluetooth mode, press this button to go to the previous track.
If you are in FM mode, press this button to go to the previous stored radio station.
If you want to decrease the Input Volume of the USB/SD Card/FM/ BLUETOOTH/AUX mode, press and
hold down this button for a few seconds to decrease the Input Volume.
17. FM Auto Scan & Play/Pause Button
When in FM mode, press this button to automatically scan for radio stations. The unit will store any
available radio stations. Press it again to stop scanning.
If in USB/SD Card/Bluetooth mode, press this button to pause, press it again to resume play.
18. Microphone Volume Knob
Use this knob to adjust the volume of the microphone.
19. Guitar Volume Knob
Use this knob to adjust the volume of the guitar.
20. Microphone Echo Knob
Use this knob to adjust the echo of the microphone.
21. MP3 IN: Connect the signal sources (DVD player, CD player, Cellphone, ect.)
P3

Rear Panel
P4

1. Audio Input
Here you can connect the audio output from the signal sources ( DVD player, CD player, Cellphone. etc.)
2. LED Light Power Switch
This switch controls the light of the woofer, turn it to the on position and the light will illuminate, turn it off
and the light will turn off.
3. FM Antenna
4. AC Input (Power Supply)
Only use the power cord provided with the unit to power the unit. Please ensure that the unit is turned off
before connecting or disconnecting the power cord.
5. Power Switch
Before the unit is turned on please ensure that all of the level controls are turned down completely. Only
once the unit is turned on, you should begin to raise the master volume levels slowly.
Bluetooth
A. Press MODE button on the unit and enter Bluetooth mode.
B. Ensure Bluetooth is activated on your Bluetooth device. Search for “SP-1776”.
C. Once found, select “SP-1776” and wait for the device to pair with the unit.
D. The unit will emit a noise once the device and unit have successfully paired and the unit’s screen will
display “bLUE”.
E. Once paired you can play music from your Bluetooth device.
Remote control
P5

1. Standby Button
Press this button to select standby.
2. Mode Selector Button
When there is NO USB or SD Card inserted into the unit, press this button to select any of the following
input modes: AUX/FM/Bluetooth.
When there is a USB or SD Card inserted into the unit, press this button to select any of the following
input modes: USB/SD/AUX/FM/Bluetooth.
3. Mute Button
Press this button to select mute and press it again to resume play.
4. VOL+
Press and hold down this button for a few second to increase the volume.
5. CH+
Press this button to go the next track in USB/SD Card/Bluetooth mode or go to next radio station in
FM mode.
6. CH-
Press this button to go the previous track in USB/SD Card/Bluetooth mode or go to previous stored
radio station in FM mode.
7. VOL-
Press and hold down this button for a few second to decrease the volume.
8. E/R (EQ Button)
Press this button to select EQ function.
9. STOP Button
Press this button one time to stop the music and press the pause/play button to resume play in
USB/SD Card.
10. FM Audio Scan & Play/Pause Button
When in FM mode, press this button to automatically scan for radio stations. The unit will store any
available radio stations. Press it again to stop scanning.
If in USB/SD Card/Bluetooth mode, press this button to pause, press it again to resume play.
11. Repeat Button
When in USB/SD Card mode, press this button to select whether to repeat the current track or to repeat
all tracks.
12. 0-9 Button
Press this button to select tracks in USB/SD Card.
Press this button to select stored radio stations in FM mode.
P6