Panacom T10 TRIP SOUND User manual

USER MANUAL
SP-1310 RECHARGEABLE SPEAKER
User’s Guide
Thank you for purchasing SP-1310 Panacom’s
Rechargeable Speaker.
Please read the manual carefully before
operating.
FEATURES
Wireless BT connection
TWS-True Wireless Stereo
FM radio
USB/TF
Rechargeable battery
USB charging cable
Aux in
3W RMS
SPECIFICATIONS
Speaker size: 2.5”
Lithium battery: 600mAh
INTERNATIONAL WARRANTY
Terms and Conditions
1. Panacom warrants the operation of this product to be free
from any manufacturing and/or material defect for a period of
6 months from the date of purchase by the user.
2. This warranty is limited to the repair and/or replacement
of this product, according to our own criterion, free of
charge within the stipulated term and it does not extend to
consequential or incidental damages to other products that
may be used with this unit.
3. The warranty shall be voided in the following cases: a)
repair or attempt to repair by third parties not authorized
by the company. b) in case of performing any type of cut in
connection cables, plugs, connectors, or other adapters
different from the original ones provided by the company.
4. To make this warranty effective, you shall contact the
Authorized Service Center of your country and they shall carry
out the pertinent procedure. In order to start the necessary
procedure to get said warranty, you shall hand in the Original
Purchase Invoice where the purchase date, dealer name and
product identication shall be stated clearly.
5. Transportation, freight, stay and/or insurance expenses, if
any, are not covered by this warranty.
REPAIR SERVICE
To ask for customer service please call 0810-888-7262.
www.panacom.com
1.WIRELESS BT CONNECTION
A) BT Version: 5.0, with lower power consumption
and over 10m meters operating range.
B) ON/OFF, after the power is turned on, the display
“BLUE” ashes and the speaker emits a BT mode tone.
C) The “BLUE” indicator ashes into the pairing state,
open the phone BT, search for the device name, click
the device name to conrm and then connect. After
the connection is successful, “BLUE” is always on,
and the speaker sends a pairing success tone.
2. TF/MICRO SD CARD MODE:
When the speaker is not plugged into the TF card
device, it will boot into the BT mode. Inserting the
TF card speaker will automatically detect the TF card
playback mode, displaying ‘PLAY’ and playback time.
If the speaker has a TF card device, it will enter the TF
card mode directly after booting.
3. USB MODE:
When the speaker is not plugged into the U disk,
it will boot into the BT mode. Inserting the U disk,
speaker will automatically detect the USB playback
mode, displaying ‘PLAY’ and playback time. If the
SP-1310 speaker has a U disk, it will enter the TF card mode
directly after booting.
4. FM MODE:
A) Press the button ‘MODE’, enter into FM mode.
FM Frequency is 87.5Hz – 108.0MHz.
B) This speaker has a built-in radio antenna, needn’t
an external antenna.
C) Press and hold the button ‘PLAY/PAUSE’ to
automatically search the station, press the “PLAY/
PAUSE’ button to pause.
5. AUX MODE:
Plug one end of the 3.5MM audio cable into the
speaker AUX jack, the speaker will automatically
detect the AUX mode, and the other 3.5MM plug is
connected to the phone or computer.
6. CHARGING:
A) Plug the USB cable into the speaker to connect
to the 5V charger or computer to charge for inside
Li-battery.
B) The item has a red light on the charging indicator.
When charging, the indicator light is on. When it is
full, the indicator light is off.
7. MODE CYCLE:
Press ‘MODE’ button to switch USB / TF / BT / FM
/ AUX. (Note: USB, TF, AUX are only used when
USB is plugged in.)
8. TWS (TRUE WIRELESS STEREO)
Use your mobile phone connect one BT speaker
successfully rstly, Under BT mode, double click
Play/Pause button of another BT speaker, then it
can enter into TWS pairing successfully.

USER MANUAL
SP-1310 RECHARGEABLE SPEAKER
User’s Guide
Thank you for purchasing SP-1310 Panacom’s
Rechargeable Speaker.
Please read the manual carefully before
operating.
FEATURES
Wireless BT connection
TWS-True Wireless Stereo
FM radio
USB/TF
Rechargeable battery
USB charging cable
Aux in
3W RMS
SPECIFICATIONS
Speaker size: 2.5”
Lithium battery: 600mAh
INTERNATIONAL WARRANTY
Terms and Conditions
1. Panacom warrants the operation of this product to be free
from any manufacturing and/or material defect for a period of
6 months from the date of purchase by the user.
2. This warranty is limited to the repair and/or replacement
of this product, according to our own criterion, free of
charge within the stipulated term and it does not extend to
consequential or incidental damages to other products that
may be used with this unit.
3. The warranty shall be voided in the following cases: a)
repair or attempt to repair by third parties not authorized
by the company. b) in case of performing any type of cut in
connection cables, plugs, connectors, or other adapters
different from the original ones provided by the company.
4. To make this warranty effective, you shall contact the
Authorized Service Center of your country and they shall carry
out the pertinent procedure. In order to start the necessary
procedure to get said warranty, you shall hand in the Original
Purchase Invoice where the purchase date, dealer name and
product identication shall be stated clearly.
5. Transportation, freight, stay and/or insurance expenses, if
any, are not covered by this warranty.
REPAIR SERVICE
To ask for customer service please call 0810-888-7262.
www.panacom.com
1.WIRELESS BT CONNECTION
A) BT Version: 5.0, with lower power consumption
and over 10m meters operating range.
B) ON/OFF, after the power is turned on, the display
“BLUE” ashes and the speaker emits a BT mode tone.
C) The “BLUE” indicator ashes into the pairing state,
open the phone BT, search for the device name, click
the device name to conrm and then connect. After
the connection is successful, “BLUE” is always on,
and the speaker sends a pairing success tone.
2. TF/MICRO SD CARD MODE:
When the speaker is not plugged into the TF card
device, it will boot into the BT mode. Inserting the
TF card speaker will automatically detect the TF card
playback mode, displaying ‘PLAY’ and playback time.
If the speaker has a TF card device, it will enter the TF
card mode directly after booting.
3. USB MODE:
When the speaker is not plugged into the U disk,
it will boot into the BT mode. Inserting the U disk,
speaker will automatically detect the USB playback
mode, displaying ‘PLAY’ and playback time. If the
SP-1310 speaker has a U disk, it will enter the TF card mode
directly after booting.
4. FM MODE:
A) Press the button ‘MODE’, enter into FM mode.
FM Frequency is 87.5Hz – 108.0MHz.
B) This speaker has a built-in radio antenna, needn’t
an external antenna.
C) Press and hold the button ‘PLAY/PAUSE’ to
automatically search the station, press the “PLAY/
PAUSE’ button to pause.
5. AUX MODE:
Plug one end of the 3.5MM audio cable into the
speaker AUX jack, the speaker will automatically
detect the AUX mode, and the other 3.5MM plug is
connected to the phone or computer.
6. CHARGING:
A) Plug the USB cable into the speaker to connect
to the 5V charger or computer to charge for inside
Li-battery.
B) The item has a red light on the charging indicator.
When charging, the indicator light is on. When it is
full, the indicator light is off.
7. MODE CYCLE:
Press ‘MODE’ button to switch USB / TF / BT / FM
/ AUX. (Note: USB, TF, AUX are only used when
USB is plugged in.)
8. TWS (TRUE WIRELESS STEREO)
Use your mobile phone connect one BT speaker
successfully rstly, Under BT mode, double click
Play/Pause button of another BT speaker, then it
can enter into TWS pairing successfully.

USER MANUAL
SP-1310 RECHARGEABLE SPEAKER
User’s Guide
Thank you for purchasing SP-1310 Panacom’s
Rechargeable Speaker.
Please read the manual carefully before
operating.
FEATURES
Wireless BT connection
TWS-True Wireless Stereo
FM radio
USB/TF
Rechargeable battery
USB charging cable
Aux in
3W RMS
SPECIFICATIONS
Speaker size: 2.5”
Lithium battery: 600mAh
INTERNATIONAL WARRANTY
Terms and Conditions
1. Panacom warrants the operation of this product to be free
from any manufacturing and/or material defect for a period of
6 months from the date of purchase by the user.
2. This warranty is limited to the repair and/or replacement
of this product, according to our own criterion, free of
charge within the stipulated term and it does not extend to
consequential or incidental damages to other products that
may be used with this unit.
3. The warranty shall be voided in the following cases: a)
repair or attempt to repair by third parties not authorized
by the company. b) in case of performing any type of cut in
connection cables, plugs, connectors, or other adapters
different from the original ones provided by the company.
4. To make this warranty effective, you shall contact the
Authorized Service Center of your country and they shall carry
out the pertinent procedure. In order to start the necessary
procedure to get said warranty, you shall hand in the Original
Purchase Invoice where the purchase date, dealer name and
product identication shall be stated clearly.
5. Transportation, freight, stay and/or insurance expenses, if
any, are not covered by this warranty.
REPAIR SERVICE
To ask for customer service please call 0810-888-7262.
www.panacom.com
1.WIRELESS BT CONNECTION
A) BT Version: 5.0, with lower power consumption
and over 10m meters operating range.
B) ON/OFF, after the power is turned on, the display
“BLUE” ashes and the speaker emits a BT mode tone.
C) The “BLUE” indicator ashes into the pairing state,
open the phone BT, search for the device name, click
the device name to conrm and then connect. After
the connection is successful, “BLUE” is always on,
and the speaker sends a pairing success tone.
2. TF/MICRO SD CARD MODE:
When the speaker is not plugged into the TF card
device, it will boot into the BT mode. Inserting the
TF card speaker will automatically detect the TF card
playback mode, displaying ‘PLAY’ and playback time.
If the speaker has a TF card device, it will enter the TF
card mode directly after booting.
3. USB MODE:
When the speaker is not plugged into the U disk,
it will boot into the BT mode. Inserting the U disk,
speaker will automatically detect the USB playback
mode, displaying ‘PLAY’ and playback time. If the
SP-1310 speaker has a U disk, it will enter the TF card mode
directly after booting.
4. FM MODE:
A) Press the button ‘MODE’, enter into FM mode.
FM Frequency is 87.5Hz – 108.0MHz.
B) This speaker has a built-in radio antenna, needn’t
an external antenna.
C) Press and hold the button ‘PLAY/PAUSE’ to
automatically search the station, press the “PLAY/
PAUSE’ button to pause.
5. AUX MODE:
Plug one end of the 3.5MM audio cable into the
speaker AUX jack, the speaker will automatically
detect the AUX mode, and the other 3.5MM plug is
connected to the phone or computer.
6. CHARGING:
A) Plug the USB cable into the speaker to connect
to the 5V charger or computer to charge for inside
Li-battery.
B) The item has a red light on the charging indicator.
When charging, the indicator light is on. When it is
full, the indicator light is off.
7. MODE CYCLE:
Press ‘MODE’ button to switch USB / TF / BT / FM
/ AUX. (Note: USB, TF, AUX are only used when
USB is plugged in.)
8. TWS (TRUE WIRELESS STEREO)
Use your mobile phone connect one BT speaker
successfully rstly, Under BT mode, double click
Play/Pause button of another BT speaker, then it
can enter into TWS pairing successfully.

USER MANUAL
SP-1310 RECHARGEABLE SPEAKER
User’s Guide
Thank you for purchasing SP-1310 Panacom’s
Rechargeable Speaker.
Please read the manual carefully before
operating.
FEATURES
Wireless BT connection
TWS-True Wireless Stereo
FM radio
USB/TF
Rechargeable battery
USB charging cable
Aux in
3W RMS
SPECIFICATIONS
Speaker size: 2.5”
Lithium battery: 600mAh
INTERNATIONAL WARRANTY
Terms and Conditions
1. Panacom warrants the operation of this product to be free
from any manufacturing and/or material defect for a period of
6 months from the date of purchase by the user.
2. This warranty is limited to the repair and/or replacement
of this product, according to our own criterion, free of
charge within the stipulated term and it does not extend to
consequential or incidental damages to other products that
may be used with this unit.
3. The warranty shall be voided in the following cases: a)
repair or attempt to repair by third parties not authorized
by the company. b) in case of performing any type of cut in
connection cables, plugs, connectors, or other adapters
different from the original ones provided by the company.
4. To make this warranty effective, you shall contact the
Authorized Service Center of your country and they shall carry
out the pertinent procedure. In order to start the necessary
procedure to get said warranty, you shall hand in the Original
Purchase Invoice where the purchase date, dealer name and
product identication shall be stated clearly.
5. Transportation, freight, stay and/or insurance expenses, if
any, are not covered by this warranty.
REPAIR SERVICE
To ask for customer service please call 0810-888-7262.
www.panacom.com
1.WIRELESS BT CONNECTION
A) BT Version: 5.0, with lower power consumption
and over 10m meters operating range.
B) ON/OFF, after the power is turned on, the display
“BLUE” ashes and the speaker emits a BT mode tone.
C) The “BLUE” indicator ashes into the pairing state,
open the phone BT, search for the device name, click
the device name to conrm and then connect. After
the connection is successful, “BLUE” is always on,
and the speaker sends a pairing success tone.
2. TF/MICRO SD CARD MODE:
When the speaker is not plugged into the TF card
device, it will boot into the BT mode. Inserting the
TF card speaker will automatically detect the TF card
playback mode, displaying ‘PLAY’ and playback time.
If the speaker has a TF card device, it will enter the TF
card mode directly after booting.
3. USB MODE:
When the speaker is not plugged into the U disk,
it will boot into the BT mode. Inserting the U disk,
speaker will automatically detect the USB playback
mode, displaying ‘PLAY’ and playback time. If the
SP-1310 speaker has a U disk, it will enter the TF card mode
directly after booting.
4. FM MODE:
A) Press the button ‘MODE’, enter into FM mode.
FM Frequency is 87.5Hz – 108.0MHz.
B) This speaker has a built-in radio antenna, needn’t
an external antenna.
C) Press and hold the button ‘PLAY/PAUSE’ to
automatically search the station, press the “PLAY/
PAUSE’ button to pause.
5. AUX MODE:
Plug one end of the 3.5MM audio cable into the
speaker AUX jack, the speaker will automatically
detect the AUX mode, and the other 3.5MM plug is
connected to the phone or computer.
6. CHARGING:
A) Plug the USB cable into the speaker to connect
to the 5V charger or computer to charge for inside
Li-battery.
B) The item has a red light on the charging indicator.
When charging, the indicator light is on. When it is
full, the indicator light is off.
7. MODE CYCLE:
Press ‘MODE’ button to switch USB / TF / BT / FM
/ AUX. (Note: USB, TF, AUX are only used when
USB is plugged in.)
8. TWS (TRUE WIRELESS STEREO)
Use your mobile phone connect one BT speaker
successfully rstly, Under BT mode, double click
Play/Pause button of another BT speaker, then it
can enter into TWS pairing successfully.

USER MANUAL
SP-1310 RECHARGEABLE SPEAKER
User’s Guide
Thank you for purchasing SP-1310 Panacom’s
Rechargeable Speaker.
Please read the manual carefully before
operating.
FEATURES
Wireless BT connection
TWS-True Wireless Stereo
FM radio
USB/TF
Rechargeable battery
USB charging cable
Aux in
3W RMS
SPECIFICATIONS
Speaker size: 2.5”
Lithium battery: 600mAh
INTERNATIONAL WARRANTY
Terms and Conditions
1. Panacom warrants the operation of this product to be free
from any manufacturing and/or material defect for a period of
6 months from the date of purchase by the user.
2. This warranty is limited to the repair and/or replacement
of this product, according to our own criterion, free of
charge within the stipulated term and it does not extend to
consequential or incidental damages to other products that
may be used with this unit.
3. The warranty shall be voided in the following cases: a)
repair or attempt to repair by third parties not authorized
by the company. b) in case of performing any type of cut in
connection cables, plugs, connectors, or other adapters
different from the original ones provided by the company.
4. To make this warranty effective, you shall contact the
Authorized Service Center of your country and they shall carry
out the pertinent procedure. In order to start the necessary
procedure to get said warranty, you shall hand in the Original
Purchase Invoice where the purchase date, dealer name and
product identication shall be stated clearly.
5. Transportation, freight, stay and/or insurance expenses, if
any, are not covered by this warranty.
REPAIR SERVICE
To ask for customer service please call 0810-888-7262.
www.panacom.com
1.WIRELESS BT CONNECTION
A) BT Version: 5.0, with lower power consumption
and over 10m meters operating range.
B) ON/OFF, after the power is turned on, the display
“BLUE” ashes and the speaker emits a BT mode tone.
C) The “BLUE” indicator ashes into the pairing state,
open the phone BT, search for the device name, click
the device name to conrm and then connect. After
the connection is successful, “BLUE” is always on,
and the speaker sends a pairing success tone.
2. TF/MICRO SD CARD MODE:
When the speaker is not plugged into the TF card
device, it will boot into the BT mode. Inserting the
TF card speaker will automatically detect the TF card
playback mode, displaying ‘PLAY’ and playback time.
If the speaker has a TF card device, it will enter the TF
card mode directly after booting.
3. USB MODE:
When the speaker is not plugged into the U disk,
it will boot into the BT mode. Inserting the U disk,
speaker will automatically detect the USB playback
mode, displaying ‘PLAY’ and playback time. If the
SP-1310 speaker has a U disk, it will enter the TF card mode
directly after booting.
4. FM MODE:
A) Press the button ‘MODE’, enter into FM mode.
FM Frequency is 87.5Hz – 108.0MHz.
B) This speaker has a built-in radio antenna, needn’t
an external antenna.
C) Press and hold the button ‘PLAY/PAUSE’ to
automatically search the station, press the “PLAY/
PAUSE’ button to pause.
5. AUX MODE:
Plug one end of the 3.5MM audio cable into the
speaker AUX jack, the speaker will automatically
detect the AUX mode, and the other 3.5MM plug is
connected to the phone or computer.
6. CHARGING:
A) Plug the USB cable into the speaker to connect
to the 5V charger or computer to charge for inside
Li-battery.
B) The item has a red light on the charging indicator.
When charging, the indicator light is on. When it is
full, the indicator light is off.
7. MODE CYCLE:
Press ‘MODE’ button to switch USB / TF / BT / FM
/ AUX. (Note: USB, TF, AUX are only used when
USB is plugged in.)
8. TWS (TRUE WIRELESS STEREO)
Use your mobile phone connect one BT speaker
successfully rstly, Under BT mode, double click
Play/Pause button of another BT speaker, then it
can enter into TWS pairing successfully.

USER MANUAL
SP-1310 RECHARGEABLE SPEAKER
User’s Guide
Thank you for purchasing SP-1310 Panacom’s
Rechargeable Speaker.
Please read the manual carefully before
operating.
FEATURES
Wireless BT connection
TWS-True Wireless Stereo
FM radio
USB/TF
Rechargeable battery
USB charging cable
Aux in
3W RMS
SPECIFICATIONS
Speaker size: 2.5”
Lithium battery: 600mAh
INTERNATIONAL WARRANTY
Terms and Conditions
1. Panacom warrants the operation of this product to be free
from any manufacturing and/or material defect for a period of
6 months from the date of purchase by the user.
2. This warranty is limited to the repair and/or replacement
of this product, according to our own criterion, free of
charge within the stipulated term and it does not extend to
consequential or incidental damages to other products that
may be used with this unit.
3. The warranty shall be voided in the following cases: a)
repair or attempt to repair by third parties not authorized
by the company. b) in case of performing any type of cut in
connection cables, plugs, connectors, or other adapters
different from the original ones provided by the company.
4. To make this warranty effective, you shall contact the
Authorized Service Center of your country and they shall carry
out the pertinent procedure. In order to start the necessary
procedure to get said warranty, you shall hand in the Original
Purchase Invoice where the purchase date, dealer name and
product identication shall be stated clearly.
5. Transportation, freight, stay and/or insurance expenses, if
any, are not covered by this warranty.
REPAIR SERVICE
To ask for customer service please call 0810-888-7262.
www.panacom.com
1.WIRELESS BT CONNECTION
A) BT Version: 5.0, with lower power consumption
and over 10m meters operating range.
B) ON/OFF, after the power is turned on, the display
“BLUE” ashes and the speaker emits a BT mode tone.
C) The “BLUE” indicator ashes into the pairing state,
open the phone BT, search for the device name, click
the device name to conrm and then connect. After
the connection is successful, “BLUE” is always on,
and the speaker sends a pairing success tone.
2. TF/MICRO SD CARD MODE:
When the speaker is not plugged into the TF card
device, it will boot into the BT mode. Inserting the
TF card speaker will automatically detect the TF card
playback mode, displaying ‘PLAY’ and playback time.
If the speaker has a TF card device, it will enter the TF
card mode directly after booting.
3. USB MODE:
When the speaker is not plugged into the U disk,
it will boot into the BT mode. Inserting the U disk,
speaker will automatically detect the USB playback
mode, displaying ‘PLAY’ and playback time. If the
SP-1310 speaker has a U disk, it will enter the TF card mode
directly after booting.
4. FM MODE:
A) Press the button ‘MODE’, enter into FM mode.
FM Frequency is 87.5Hz – 108.0MHz.
B) This speaker has a built-in radio antenna, needn’t
an external antenna.
C) Press and hold the button ‘PLAY/PAUSE’ to
automatically search the station, press the “PLAY/
PAUSE’ button to pause.
5. AUX MODE:
Plug one end of the 3.5MM audio cable into the
speaker AUX jack, the speaker will automatically
detect the AUX mode, and the other 3.5MM plug is
connected to the phone or computer.
6. CHARGING:
A) Plug the USB cable into the speaker to connect
to the 5V charger or computer to charge for inside
Li-battery.
B) The item has a red light on the charging indicator.
When charging, the indicator light is on. When it is
full, the indicator light is off.
7. MODE CYCLE:
Press ‘MODE’ button to switch USB / TF / BT / FM
/ AUX. (Note: USB, TF, AUX are only used when
USB is plugged in.)
8. TWS (TRUE WIRELESS STEREO)
Use your mobile phone connect one BT speaker
successfully rstly, Under BT mode, double click
Play/Pause button of another BT speaker, then it
can enter into TWS pairing successfully.