Panasonic CS-E10JD3EA User manual

F566765
ENGLISH
ENGLISH
2 ~ 11
2 ~ 11
Before operating the unit, read these
Before operating the unit, read these
operating instructions thoroughly and
operating instructions thoroughly and
keep them for future reference.
keep them for future reference.
DEUTSCH
12 ~ 21
12 ~ 21
Bevor Sie das Gerät in Betrieb nehmen,
lesen Sie bitte diese Bedienungsanleitung
aufmerksam durch und bewahren Sie sie für
die künftige Verwendung auf.
NEDERLANDS
22 ~ 31
22 ~ 31
Lees voor u het apparaat gebruikt deze
gebruiksinstructies grondig en bewaar ze
voor toekomstig gebruik.
ITALIANO
32 ~ 41
32 ~ 41
Prima di utilizzare l’unità si prega di
leggere attentamente le istruzioni e di
conservare questo opuscolo per potervi
fare riferimento in futuro.
E
42 ~ 51
42 ~ 51
     ,
    
     
.
FRANÇAIS
52 ~ 61
52 ~ 61
Avant d’utiliser l’appareil, lisez ce
mode d’emploi dans son intégralité
et conservez-le pour toute référence
ultérieure.
ESPAÑOL 62 ~ 71
Antes de utilizar la unidad, sírvase leer
atentamente estas instrucciones de
funcionamiento y conservarlas como
futuro elemento de consulta.
PORTUGUÊS 72 ~ 81
Antes de ligar a unidade, leia
cuidadosamente este manual de utilização
e guarde-o para futura referência.
 82 ~ 91
   ,
  
     
.
QUICK GUIDE / GUIDE RAPIDE
QUICK GUIDE / GUIDE RAPIDE
GUÍA RÁPIDA / KURZANLEITUNG
GUÍA RÁPIDA / KURZANLEITUNG
GUIDA RAPIDA / SNELLE GIDS
GUIDA RAPIDA / SNELLE GIDS
GUΙA RÁPIDO / ΣYNTOMOΣO∆HГOΣ
GUΙA RÁPIDO / ΣYNTOMOΣO∆HГOΣ
БЪРЗ СПРАВОЧНИК
БЪРЗ СПРАВОЧНИК
Operating Instructions
Air Conditioner
Indoor Unit Outdoor Unit
CS-E10JD3EA Single Split Outdoor Unit
CS-E15JD3EA CU-E10HBEA
CS-E18JD3EA CU-E15HBEA
CS-E21JD3EA CU-E18HBEA
CU-E21HBEA
Multi Split Outdoor Unit
CU-2E15GBE
CU-2E18CBPG
CU-3E18EBE
CU-3E18JBE
CU-3E23CBPG
CU-4E23JBE
CU-4E27CBPG
© Panasonic HA Air-Conditioning (M) Sdn. Bhd. 2008.
Unauthorized copying and distribution is a violation
of law.

2
SAFETY PRECAUTIONSSAFETY PRECAUTIONS
Air
Air
outlet
outlet
Air inlet
Air inlet
Air inlet
Air inlet
DEFINITION
The instructions to be followed are classified by the following symbols:
This symbol denotes an action
that is PROHIBITED.
These symbols denote actions
that are COMPULSORY.
To prevent personal injury, injury to others, or property damage, please observe the following.
Incorrect operation due to failure to follow instructions may cause harm or damage, the seriousness of which is classified as below:
Warning
This sign warns of death or serious injury.
Caution
This sign warns of
injury or damage
to property.
Power Supply
• Do not share the same power outlet with
other equipment.
• Do not modify power cords.
• Do not use extension cords.
• Do not operate with wet hands.
• Use the specified supply cord.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid a hazard.
• This equipment must be earthed and
strongly recommended to be installed
with Earth Leakage Circuit Breaker
(ELCB) or Residual Current Device
(RCD). Otherwise, it may cause electrical
shock or fire in case of malfunction.
• In case of emergency or abnormal
conditions (burnt smell, etc), turn off
the power supply, and please consult
authorized dealer.
Indoor Unit
• Do not install, remove and reinstall the unit by yourself; improper
installation will cause leakage, electric shock or fire. Please consult an
authorized dealer or specialist for the installation work.
• Do not insert your fingers or other objects into the unit, rotating parts
may cause injury.
• Do not attempt to repair the unit by yourself.
Indoor Unit
• Do not install the unit in a
potentially explosive atmosphere.
• Do not wash the unit with water,
benzene, thinner or scouring
powder.
• Do not use for other purposes
such as preservation of food.
• Do not use any combustible
equipment in front of the airflow
outlet.
• Do not expose directly to cold air
for a long period.
• Ensure that the drainage pipe is
connected properly. Otherwise,
leakage may occur.
• Aerate the room regularly.
Power Supply
• Switch off the power supply before
cleaning or servicing.
• Turn off the power supply if the
unit is not used for a long period
of time.
• This air conditioner is equipped
with a built-in surge protective
device. However, in order
to further protect your air
conditioner from being damaged
by abnormally strong lightning
activity, you may want to
disconnect it from the power
supply. Do not touch the air
conditioner during lightning, it may
cause electric shock.
Outdoor Unit
• Do not sit or step on the unit, you
may fall down accidentally.
• Do not touch the sharp aluminium
fin, sharp parts may cause injury.
• Ensure that the drainage pipe is
connected properly. Otherwise,
leakage may occur.
• After long periods of use, make
sure the installation rack is not
damaged.
Outdoor Unit
• Do not insert your fingers or other objects
into the unit, rotating parts may cause
injury.
Remote
Remote
Control
Control

3
ENGLISH
REGULATORY INFORMATIONREGULATORY INFORMATION Thank you for purchasing
Panasonic Air Conditioner
• Do not switch ON the unit when waxing the floor. After waxing, aerate the room properly before operating the unit.
• Do not install the unit in oily and smoky areas.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and
electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and
2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent
any potential negative effects on human health and the environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your local
municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your
local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement
set by the Directive for the chemical involved.
Pb
SAFETY PRECAUTIONS
2
REGULATORY INFORMATION
3
OPERATION CONDITION
4
MULTI AIR CONDITIONER
FUNCTION
5
PRODUCT OVERVIEW &
OPERATIONS
6~8
CARE & CLEANING
9
TROUBLESHOOTING
10
QUICK GUIDE
BACK COVER
TABLE OF CONTENTS
TABLE OF CONTENTS
NOTE :
NOTE :
The illustrations in this manual are
for explanation purposes only and
may differ from the actual unit. It is
subjected to change without notice
for future improvement.

4
OPERATION CONDITIONOPERATION CONDITION
OPERATION CONDITION
OPERATION CONDITION
Use this air conditioner under the following temperature range
(CU-E10HBEA, CU-E15HBEA, CU-E18HBEA, CU-E21HBEA)
Temperature (°C) Indoor Outdoor
*DBT *WBT *DBT *WBT
COOLING Maximum 32 23 43 26
Minimum 16 11 -10 -
HEATING Maximum 30 - 24 18
Minimum 16 - -10 -
NOTICE: • This unit is still able to operate as a cooler with outdoor temperature as low as -10°C in a non-living room, such
as a computer room, with a room temperature of 16°C or above, and room humidity up to 80%. When the
outdoor temperature drops to -10°C, compressor will be cut off and resume operation again once the temperature
rises to more than -10°C.
• When the outdoor temperature is out of the above temperature range, the heating capacity will drop significantly
and outdoor unit might stop for protection control.
(CU-2E15GBE, CU-2E18CBPG, CU-3E18EBE, CU-3E23CBPG, CU-4E27CBPG)
Temperature (°C) Indoor Outdoor
*DBT *WBT *DBT *WBT
COOLING Maximum 32 23 43 26
Minimum 16 11 16 11
HEATING Maximum 30 - 24 18
Minimum 16 - -10 -11
(CU-3E18JBE, CU-4E23JBE)
Temperature (°C) Indoor Outdoor
*DBT *WBT *DBT *WBT
COOLING Maximum 32 23 46 26
Minimum 16 11 -10 -
HEATING Maximum 30 - 24 18
Minimum 16 - -15 -16
* DBT: Dry bulb temperature
* WBT: Wet bulb temperature

5
ENGLISH
MULTI AIR CONDITIONER FUNCTIONMULTI AIR CONDITIONER FUNCTION
(CU-2E15GBE, CU-2E18CBPG, CU-3E18EBE, CU-3E18JBE, CU-3E23CBPG, CU-4E23JBE, CU-4E27CBPG)
DEFINITION
Multi air conditioner system has one outdoor unit connected to multiple indoor units.
Outdoor unit
Outdoor unit
Room B
Room B
Room A
Room A
• It is possible to operate the indoor units individually or simultaneously.
• The operation mode priority is given to the first unit that turned on.
• During operation, heating and cooling mode could not be activated at the same time for different indoor unit.
• The power indicator blinks to indicate the indoor unit is standing by for different operation mode.
INDOOR UNIT
INDOOR UNIT
Room C
Room C
Room D
Room D

6
PRODUCT OVERVIEW & OPERATIONSPRODUCT OVERVIEW & OPERATIONS
OFF/ON
Indoor Unit
Indoor Unit
Remote Control
Remote Control
OFF/ON
TEMP
TIMER/CLOCK
MODE
QUIET/
POWERFUL
FAN SPEED
MODE
CHECK RESET
AIR SWING
OFF/ON
CANCELCLOCK
SET
SELECTUP
DOWN
AC RC
6
10
13 14 15
17
16
18
2
45
3
8
7
1
11
12
1Operation LED 7Timer Setting Button Group 13 Timer/Clock Setting Display
2OFF/ON Button 8Check Button 14 Fan Speed Display
3Temperature Setting Button 9Air Conditioner Reset Button 15 Temperature Setting Display
4Operation Mode Button 10 Remote Control Reset Button 16 Quiet Operation Indicator
5Fan Speed Button 11 OFF Indicator 17 Powerful Operation Indicator
6Quiet/Powerful Operation Button 12 Operation Mode Selection
Indicator 18 System Error Display
Remote Control Preparation
1Press
CLOCK
2Press
UP
or
DOWN
to select
current day.
3Press
SET
to confirm.
4Repeat steps 2 and 3 to set
the current time.
9
Open the cover to use the
buttons

7
ENGLISH
OPTIONAL SETTINGS
OPTIONAL SETTINGS
DOWN
Press and hold for approximately 10
seconds to show temperature setting in
°C or °F.
RC
Press to restore the remote control’s
default setting.
AC
Not used in normal operations.
Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
OFF/ON
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
• For normal operation, OFF indicator shown on remote
control display when the unit is turn off.
TEMP
TO SET TEMPERATURE
• Selection range: 16°C ~ 30°C.
MODE
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects operation mode according to temperature
setting, outdoor and room temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up.
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
• During soft dry operation, the indoor fan operates at a
low fan speed.
• The louvers movement might not align with the remote
control display.
FAN SPEED
TO SELECT FAN SPEED
(5 OPTIONS)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
QUIET/
POWERFUL
POWERFUL NORMALQUIET
QUIET - TO ENJOY QUIET ENVIRONMENT
• This operation reduces airflow noise.
POWERFUL - TO ACHIEVE TEMPERATURE QUICKLY
DAILY TIMER SETTING
DAILY TIMER SETTING
•
QUIET/
POWERFUL
can be activated in all modes and can be
cancelled by pressing the respective button again.
Notes:
• For Hide-Away models,
AIR SWING
buttons are not in use.
• Airflow direction can not be adjusted.
• To turn ON or OFF the unit at a preset time.
1
MODE
• Press once to change the display from Clock to
Timer or vice-versa.
• Press for more than 4 seconds to change the
display from Daily Timer to Weekly Timer or vice-
versa.
234
OFF/ON
UP
DOWN
SET
Select ON or
OFF timer. Set the time. Confirm.
• To cancel ON or OFF timer, press
CANCEL
.
• When ON timer is set, the unit may start early before
the actual set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in the remote
control and repeats daily once set.
• The timer closest to the current time will be activated
first.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting by pressing
SET
.

8
OFF/ON
TEMP
TIMER/CLOCK
MODE
QUIET/
POWERFUL
FAN SPEED
MODE
CHECK RESET
AIR SWING
OFF/ON
CANCELCLOCK
SET
SELECTUP
DOWN
AC RC
TIMER/CLOCK
FA
MODE
AI
OFF/ON
CANCELCLOCK
SET
SELECTUP
DOWN
Weekly Timer Display
Lights up if Timer
operation is selected
6 different programs can
be set in a day (1 ~ 6)
Time to be selected
(10 minutes step)
ON Timer. To automatically switch “ON” the unit.
OFF Timer. To automatically
switch “OFF” the unit.
Day to be selected
Indicates the selected day
WEEKLY TIMER SETTING
WEEKLY TIMER SETTING
Day and Timer Set Up Method
1. Press Timer
MODE
for 4 seconds to change display
to weekly timer.
2. Press Timer
UP
or
DOWN
to select your desired day.
3. Press
SELECT
to confirm your selection.
4. “1” will be blinking, press
SELECT
to set program 1.
5. Press Timer
OFF/ON
to select ON or OFF timer.
6. Press Timer
UP
or
DOWN
to select your desired time.
If you want to set the timer together with your
desired temperature, press
TEMP
to select the
temperature.
7. Press
SET
to confirm program 1. The selected day
will be highlighted with .
• After 2 seconds, the display will move to the next
program. Repeat steps 4 to 7 to set programs 2 to 6.
• During timer setup, if no button is pressed within 30
seconds, or if the
SET
button is pressed, the setting at
that moment is confirmed and timer setup is ended.
OPERATION DETAILS
OPERATION DETAILS
Disable & Enable Weekly Timer
• To disable weekly timer setting, press
MODE
, then press
CANCE
L
.
• To enable previous weekly timer setting, press
MODE
,
then press
SET
.
Indicates the next timer
operation day
• Daily timer and weekly timer could not be set at the
same time.
• Promotes energy saving by allowing you to set up to 6
programs in any given day.
• Same timer program cannot be set in the same day.
Check Current Timer Program
Perform the step below to check the timer program for a
particular day.
1. Press Timer
MODE
to enter timer mode.
2. Press
SELECT
to enter day setting.
3. Press Timer
UP
or
DOWN
until your desired day is shown,
press
SELECT
to confirm your selection.
4. Press Timer
UP
or
DOWN
to check the set programs.
Modify Current Timer Program or Add New
Timer Program
1. Press Timer
MODE
to enter timer mode.
2. Press
SELECT
to enter day setting.
3. Press Timer
UP
or
DOWN
until your desired day is shown.
4. Perform steps 4 to 7 of “Day and Timer Set Up
Method” to modify existing timer program, or add any
timer program.
Cancel Current Timer Program
Perform the step below to cancel the timer program for a
particular day.
1. Press
SELECT
to enter day.
2. Press Timer
UP
or
DOWN
until your desired day is shown.
3. Press
SELECT
to enter program setting.
4. Press Timer
UP
or
DOWN
until your desired day is shown.
Press
CANCEL
to cancel the program, will disappear.

9
ENGLISH
CARE & CLEANINGCARE & CLEANING
•Switch off the power supply before cleaning.
•Do not touch the aluminium fin, sharp parts may cause injury.
CAUTION
WASHING INSTRUCTIONS
WASHING INSTRUCTIONS
• Please consult your nearest dealer for any suction or discharge air grille (optional parts) cleaning.
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
FOR SEASONAL INSPECTION AFTER EXTENDED NON-USE
FOR SEASONAL INSPECTION AFTER EXTENDED NON-USE
• No obstruction at air inlet and air outlet vents.
• These units are mounted inside the ceiling. It uses external air intake vent and air outlet vent to operate. Please consult
your nearest dealer for seasonal inspection.
FOR EXTENDED NON-USE
FOR EXTENDED NON-USE
• Activate heat mode for 2~3 hours to remove moisture left in the internal parts thoroughly.
• Turn off the power supply.
NON SERVICEABLE CRITERIAS
NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY then please consult authorized dealer under the following conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the remote control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.

10
TROUBLESHOOTINGTROUBLESHOOTING
Symptom
Symptom
Check
Check
Heating/Cooling operation is not working
efficiently. • Set the temperature correctly. • Close all doors and windows.
• Clear any obstruction at the air inlet and air outlet vents.
Noisy during operation. • Check if the unit has been installed at an incline.
The unit does not work. • Check if the circuit breaker is tripped.
• Check if timers have been set.
Symptom
Symptom
Cause
Cause
Mist emerges from indoor unit. • Condensation effect due to cooling process.
Water flowing sound during operation. • Refrigerant flow inside the unit.
The room has a peculiar odour. • This may due to damp smell emitted by the wall, carpet, furniture or
clothing.
Indoor fan stops occasionally during automatic
fan speed setting. • This helps to remove the surrounding odours.
Operation is delayed a few minutes after
restart. • The delay is a protection to the unit’s compressor.
Outdoor unit emits water/steam. • Condensation or evaporation occurs on pipes.
Timer indicator is always on. • The timer setting repeats daily once set.
Power indicator blinks during operation and
the indoor fan is stopped. • The unit is in defrost mode, and the melted frost is drained from the outdoor unit.
Indoor fan stops occasionally during heating
operation. • To avoid unintended cooling effect.
Power indicator blinks before the unit is
switched on. • This is a preliminary step in preparation for the operation when the ON timer has been set.
Cracking sound can be heard during
operation. • Changes of temperature cause the expansion/contraction of the unit.
The following symptoms do not indicate malfunction.
The following symptoms do not indicate malfunction.
Check the following before calling for servicing.
Check the following before calling for servicing.
The following symptons occurs when abnormality occurs during operation.
The following symptons occurs when abnormality occurs during operation.
• The unit stops and operation LED OFF.
• OFF indicator does not shown on remote control display.
When abnormality occurs, use remote control to retrieve error code.
Ensure the operation LED is in OFF condition.
OFF/ON
TEMP
TIMER/CLOCK
MODE
QUIET/
POWERFUL
FAN SPEED
MODE
CHECK RESET
AIR SWING
OFF/ON
CANCELCLOCK
SET
SELECTUP
DOWN
AC RC
2Press
UP
or
DOWN
.
If error code and
abnormality can be
identified, the operation
LED will be ON
continuously, then jot
down the error code.
Press for 5 seconds.
1
3Press for 5 seconds to
quit checking.
Operation LED
OFF Indicator
4Reveal the error code to authorized dealer.

11
ENGLISH
MEMOMEMO

OFF/ON
TEMP
TIMER/CLOCK
MODE
QUIET/
POWERFUL
FAN SPEED
MODE
CHECK RESET
AIR SWING
OFF/ON
CANCELCLOCK
SET
SELECTUP
DOWN
AC RC
Panasonic Corporation
Website: http://panasonic.net/
F566765 Printed in Malaysia OSTH0811-00
QUICK GUIDE/GUIDE RAPIDE/GUÍA RÁPIDA/
KURZANLEITUNG/GUIDA RAPIDA/SNELLE
GIDS/GUIA RÁPIDO/ΣΥΝΤΟΜΟΣ Ο∆ΗΓΟΣ/
БЪРЗ СПРАВОЧНИК
QUICK GUIDE/GUIDE RAPIDE/GUÍA RÁPIDA/
KURZANLEITUNG/GUIDA RAPIDA/SNELLE
GIDS/GUIA RÁPIDO/ΣΥΝΤΟΜΟΣ Ο∆ΗΓΟΣ/
БЪРЗ СПРАВОЧНИК
1
OFF/ON
Start/stop the operation.
Mettez l’appareil sous/hors tension.
Inicie/detenga el funcionamiento.
Schalten Sie das Gerät ein bzw.
aus.
Avviare/arrestare l’apparecchio.
Start/stop het apparaat.
Ligue/Desligue a unidade.
/ 
.
/.
2
MODE
AUTO HEAT
DRY COOL
Select the desired mode.
Sélectionnez le mode de
fonctionnement souhaité.
Seleccione el modo deseado.
Wählen Sie die gewünschte
Betriebsart aus.
Selezionare la modalità desiderata.
Selecteer de gewenste stand.
Seleccione o modo de
funcionamento pretendido.
  
  .
    
.
3
TEMP
Select the desired temperature.
Sélectionnez la température
souhaitée.
Seleccione la temperature deseada.
Stellen Sie die gewünschte
Temperatur ein.
Selezionare la temperatura
desiderata.
Stel de gewenste temperatuur in.
Programe a temperatura desejada.
  
.
  
.
Pursuant to at the directive 2004/108/EC, article 9(2)
Panasonic Testing Centre
Panasonic Service Europe, a division of
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, F.R. Germany