Panasonic CS-KV30UKF-5 Series CU-KV30UKF-5 Series User manual

CS-KV30UKF-5 series CU-KV30UKF-5 series
ACXF55-28740-AA
English
Operating Instructions
Air Conditioner
Thank you for purchasing Panasonic Air Conditioner.
Installation instructions attached.
Before operating the unit, please read these operating
instructions thoroughly and keep them for future
reference.
Split Type, Wall Mounted Room Air Conditioner
© Panasonic India Pvt. Ltd. 2019.
Unauthorized copying and distribution is a violation
of law.
Name and Address of Manufacturer:
Panasonic India Pvt. Ltd.
Plot no.1, Village - Bid Dadri,
Tehsil & District - Jhajjar - 124103,
Haryana, India.
Name and Address of Importer:
Panasonic Marketing Middle East & Africa FZE Jebel Ali,
Dubai, UNITED ARAB EMIRATES
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 1 7/3/2020 11:54:59 AMACXF55-2874_OL.ai 1 7/3/2020 11:54:59 AM

C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 2 7/3/2020 11:55:07 AMACXF55-2874_OL.ai 2 7/3/2020 11:55:07 AM

POWERFUL
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 3 7/3/2020 11:55:08 AMACXF55-2874_OL.ai 3 7/3/2020 11:55:08 AM

C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 4 7/3/2020 11:55:08 AMACXF55-2874_OL.ai 4 7/3/2020 11:55:08 AM

Operating Instructions
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 5 7/3/2020 11:55:08 AMACXF55-2874_OL.ai 5 7/3/2020 11:55:08 AM

POWERFUL
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 6 7/3/2020 11:55:09 AMACXF55-2874_OL.ai 6 7/3/2020 11:55:09 AM

How to use
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 7 7/3/2020 11:55:10 AMACXF55-2874_OL.ai 7 7/3/2020 11:55:10 AM

C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 8 7/3/2020 11:55:11 AMACXF55-2874_OL.ai 8 7/3/2020 11:55:11 AM

C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 9 7/3/2020 11:55:11 AMACXF55-2874_OL.ai 9 7/3/2020 11:55:11 AM

10
2
Start/stop the operation
• Please note that the
indication is on display to
start the unit.
3Select the desired
temperature
• Selection range:
16 °C ~ 30 °C.
•
Operating the unit within the
recommended temperature
range may save energy.
COOL: 26 °C ~ 28 °C.
DRY : 1 °C ~ 2 °C lower than
room temperature.
• Use remote control within 7 m
from the remote control receiver
of the indoor unit.
Inserting the batteries
1Pull out the back cover of remote control
2
Insert AAA or R03 batteries
3Close the cover
Clock setting
1Press CLOCK
2
Set the time
3Confirm
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 10 7/3/2020 11:55:12 AMACXF55-2874_OL.ai 10 7/3/2020 11:55:12 AM

23
1
1
3
2
7m
POWERFUL
11
Table of contents
Safety precautions...........................12-13
14-15
16
17
How to use.......................................
Cleaning instructions ............................
...................................
............................................
Troubleshooting
Information 19
Accessories
• Remote control
• AAA or R03 batteries × 2
• Remote control holder
• Screws for remote control holder × 2
English
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 11 7/3/2020 11:55:12 AMACXF55-2874_OL.ai 11 7/3/2020 11:55:12 AM

12
Safety precautions
To prevent personal injury, injury to others
or property damage, please comply with the
following:
Incorrect operation due to failure to follow
instructions below may cause harm or damage,
the seriousness of which is classified as below:
WARNING
This sign warns of
death or serious
injury.
CAUTION
This sign warns of
injury or damage to
property.
The instructions to be followed are classified by
the following symbols:
This symbol denotes an
action that is PROHIBITED.
These symbols denote
actions COMPULSORY.
Indoor unit
Outdoor unit
Power supply
Remote control
Air inlet
Air inlet
Air inlet
Air inlet
Air outlet
Air outlet
Air outlet
Air outlet
WARNING
Indoor unit and outdoor unit
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
Please consult authorised dealer or specialist to
clean the internal parts, repair, install, remove and
reinstall the unit. Improper installation and handling
will cause leakage, electric shock or fire.
Confirm with authorised dealer or specialist on
usage of any specified refrigerant type.
Using refrigerant type other than the specified may
cause product damage, burst and injury etc.
Do not install the unit in a potentially explosive or
flammable atmosphere. Failure to do so could result
in fire.
Do not insert your fingers or other objects
into the air conditioner indoor or outdoor
unit, rotating parts may cause injury.
Do not touch the outdoor unit during lightning, it
may cause electric shock.
Do not expose yourself directly to cold air for a long
period to avoid excess cooling.
Do not sit or step on the unit, you may fall
down accidentally.
Remote control
Do not allow infants and small children to play with
the remote control to prevent them from accidentally
swallowing the batteries.
Power supply
Do not use a modified cord,
joint cord, extension cord or
unspecified cord to prevent
overheating and fire.
To prevent overheating, fire or electric shock:
• Do not share the same power outlet with other
equipment.
• Do not operate with wet hands.
•
Do not over bend the power supply cord.
• Do not operate or stop the unit by inserting or
pulling out the power plug.
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 12 7/3/2020 11:55:13 AMACXF55-2874_OL.ai 12 7/3/2020 11:55:13 AM

13
Safety precautions
English
Use complete power supply cord without joining.
In unavoidable circumstances that complete
power supply cord without joining is impossible,
use an approved connection means (for
example: socket and plug).
Air Conditioner
Complete wire
without joining
Approved connecting
means (for example:
approved socket and
plug)
Complete
wire without
joining
Power
Supply
OR
Indoor Unit
Outdoor
Unit
If the supply cord is damaged, it must be
replaced by the manufacturer, service agent or
similarly qualified persons in order to avoid a
hazard.
It is strongly recommended to be installed
with Earth Leakage Circuit Breaker (ELCB)
or Residual Current Device (RCD) to prevent
electric shock or fire.
To prevent overheating, fire or electric shock:
• Insert the power plug properly.
• Dust on the power plug should be periodically
wiped with a dry cloth.
Stop using the product if any abnormality/failure
occurs and disconnect the power plug or turn off
the power switch and breaker.
(Risk of smoke/fire/electric shock) Examples of
abnormality/failure
• The ELCB trips frequently.
• Burning smell is observed.
• Abnormal noise or vibration of the unit is
observed.
• Water leaks from the indoor unit.
• Power cord or plug becomes abnormally hot.
• Fan speed cannot be controlled.
• The unit stops running immediately even if it is
switched on for operation.
• The fan does not stop even if the operation is
stopped.
Contact your local dealer immediately for
maintenance/repair.
This equipment must be earthed to prevent
electrical shock or fire.
Prevent electric shock by switching off the power
supply and unplug:
- Before cleaning or servicing,
- When extended non-use, or
- During abnormally strong lightning activity.
CAUTION
Indoor unit and outdoor unit
Do not wash the indoor unit with water,
benzine, thinner or scouring powder to avoid
damage or corrosion at the unit.
Do not use for preservation of precise equipment,
food, animals, plants, artwork or other objects.
This may cause quality deterioration, etc.
Do not use any combustible equipment in front of
the airflow outlet to avoid fire propagation.
Do not expose plants or pet directly to airflow to
avoid injury, etc.
Do not touch the sharp aluminium fin,
sharp parts may cause injury.
Do not switch ON the indoor unit when waxing
the floor. After waxing, aerate the room properly
before operating the unit.
Do not install the unit in oily and smoky areas to
prevent damage to the unit.
Do not dismantle the unit for cleaning purpose to
avoid injury.
Do not step onto an unstable bench when
cleaning the unit to avoid injury.
Do not place a vase or water container on the
unit. Water may enter the unit and degrade the
insulation. This may cause an electric shock.
Do not open window or door for long time during
operation.
Prevent water leakage by ensuring drainage
pipe is:
- Connected properly,
- Kept clear of gutters and containers, or
- Not immersed in water
After a long period of use or use with any
combustible equipment, aerate the room
regularly.
After a long period of use, make sure the
installation rack does not deteriorate to prevent
the unit from falling down.
Remote control
Do not use rechargeable (Ni-Cd) batteries. It may
damage the remote control.
To prevent malfunction or damage of the remote
control:
• Remove the batteries if the unit is not going to
be used for a long period of time.
• New batteries of the same type must be
inserted following the polarity stated.
Power supply
Do not disconnect the plug by pulling the cord to
prevent electric shock.
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 13 7/3/2020 11:55:13 AMACXF55-2874_OL.ai 13 7/3/2020 11:55:13 AM

POWERFUL
14
How to use
To maximise comfort while
sleeping
• This operation provides you with a comfortable
environment while sleeping by gradually increase
the set temperature 1 °C after 3 hours operation.
• The unit is turned off after 8 hours.
• Can be cancelled by pressing the respective
button again.
To enjoy quiet operation
• This operation reduces airflow noise.
SLEEP
Remote control
display
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.
To select operation mode
AUTO - For your convenience
COOL - To enjoy cool air
DRY - To dehumidify the environment
Unit selects the opertion mode according to the
room temperature.
Once AUTO mode is selected, the unit will
operate at the standard setting temperature.
To reduce power consumption during COOL mode,
use curtains to screen off sunlight and outdoor heat.
Unit operates at low fan speed to give a gentle
cooling operation.
Fan speed cannot be modified in this mode.
Remote control
receiver and indicator
SLEEP POWER
POWERFUL TIMER
The unit displays set temperature.
•
To adjust horizontal airflow direction
Temperature display
Auto OFF/ON button
• Manually adjustable. Use when remote control is
misplaced or a malfunction occurs.
Raise the front panel:
• To use in AUTO mode, press the
button once.
• To use in COOL mode, press and
hold the button until 1 beep is
heard, then release.
• Press the button again to turn off.
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 14 7/3/2020 11:55:13 AMACXF55-2874_OL.ai 14 7/3/2020 11:55:13 AM

15
How to use
English
To adjust airflow direction
(Remote control display)
• Keeps the room ventilated.
• If AUTO is set, flaps swing up/down
automatically.
• Do not adjust the flap by hand.
To set the timer
To turn ON and OFF the unit at a preset times.
12 3
1Select ON or OFF
timer
Example:
OFF at 22:00
• Each time pressed:
Cancel
2Set the time
3Confirm
• To cancel ON or OFF timer, press or
then press .
• If timer is cancelled manually or due to power
failure, you can restore the timer again by
pressing or then press .
• The nearest timer setting will be displayed and
will activate in sequence.
• When ON Timer is set, the unit may start
earlier (up to 15 minutes) before the actual
set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in
the remote control and repeats daily once set.
For clock setting, please refer to Quick guide.
Auto Restart Control
• If power is resumed after a power failure, the
operation will restart automatically after a period
of time with previous operation mode and airflow
direction.
• This control is not applicable when TIMER is set.
To select fan speed
(Remote control display)
AUTO
FAN
• For AUTO, the indoor fan speed is automatically
adjusted accoding to the operation mode.
Operation conditions
Use this air conditioner under the following
temperature range.
DBT : Dry bulb temperature
WBT : Wet bulb temperature
52 31
16
32 23
To switch between powerful
POWERFUL: To reach temperature quickly
POWERFUL
POWERFUL
TIMER
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 15 7/3/2020 11:55:14 AMACXF55-2874_OL.ai 15 7/3/2020 11:55:14 AM

16
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 16 7/3/2020 11:55:15 AMACXF55-2874_OL.ai 16 7/3/2020 11:55:15 AM

17
Cleaning instructions / Troubleshooting
English
The following symptoms do not indicate malfunction.
Symptom Cause
Mist emerges from indoor unit. • Condensation effect due to cooling process.
Water flowing sound during operation. • Refrigerant flow inside the unit.
The room has a peculiar odour. • This may be due to damp smell emitted by the wall,
carpet, furniture or clothing.
Indoor fan stops occasionally during automatic
fan speed setting.
• This helps to remove the surrounding odour.
Operation is delayed a few minutes after
restarting.
• The delay is a protection to the unit’s compressor.
Outdoor unit emits water/steam. • Condensation or evaporation occurs on pipes.
TIMER indicator is always on. • The timer setting repeats daily once set.
POWER indicator blinks before the unit is
switched on.
• This is a preliminary step in preparation for the
operation when the ON timer has been set.
Cracking sound during operation. • Changes of temperature caused the expansion/
contraction of the unit.
Discoloration of some plastic parts. • Discoloration is subject to material types used in plastic
parts, accelerated when exposed to heat, sun light,
UV light, or environmental factor.
Check the following before calling for servicing.
Symptom Check
Operation in COOL mode is not working
efficiently.
• Set the temperature correctly.
• Close all doors and windows.
• Clean or replace the filters.
• Clear any obstruction at the air inlet and air outlet vents.
.en
ilcnina
ta
della
tsn
ineebsaht
inu
eht
f
i
kceh
C•.noitarepogniru
d
ysio
N
• Close the front panel properly.
Remote control does not work.
(Display is dim or transmission signal is weak.)
• Insert the batteries correctly.
• Replace weak batteries.
.d
eppirtsirekaerbtiucricehtfik
ceh
C•
.
kro
w
tonseod
t
inueh
T
• Check if timers have been set.
The unit does not receive the signal from the
remote control.
• Make sure the receiver is not obstructed.
• Certain fluorescent lights may interfere with signal
transmitter. Please consult authorised dealer.
Troubleshooting
NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY AND UNPLUG then please consult authorised dealer under the following
conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the
remote control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning
properly.
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 17 7/3/2020 11:55:15 AMACXF55-2874_OL.ai 17 7/3/2020 11:55:15 AM

18
To be in compliance IEC 61000-3-11, the product shall be connected only to a supply of the system
impedance: | Zsys| = 0.186 ohms or less. Before connect the product to public power nework, please
consult your local power supply authourity to ensure the power network meet above requirement.
• CS/CU-KV30UKF-5
Considerations to be taken by users before connecting product to a power supply
Information /
CS/CU-KV30UKF-5
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 18 7/3/2020 11:55:15 AMACXF55-2874_OL.ai 18 7/3/2020 11:55:15 AM

Memo /
Information / Memo
19
English
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 19 7/3/2020 11:55:15 AMACXF55-2874_OL.ai 19 7/3/2020 11:55:15 AM

ACXF55-28740-AA
FT0620-0
Printed in India
Panasonic Corporation
Website: http://www.panasonic.com
© Panasonic Corporation 2020
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2874_OL.ai 20 7/3/2020 11:55:16 AMACXF55-2874_OL.ai 20 7/3/2020 11:55:16 AM