Panasonic KX-TCD820E User manual

PQQW14742ZA DC0705DK0
Digital Cordless Answering System
Model No. KX-TCD820E
1Connections
2Battery installation
Quick Guide
Hooks
Use only the included AC adaptor and
telephone line cord.
(220–240 V, 50 Hz)
To telephone network
Charge the batteries
for about 7 hours
before initial use.
TCD820E_QG(e).fm Page 1 Wednesday, July 13, 2005 5:40 PM
Black process 45.0° 60.0 LPI

–2 –
3Symbols used in this manual
Setting the date and time
4Basic operations
Symbol Meaning
"Press "(centre of joystick).
iProceed to the next operation.
#Press #(centre of joystick).
jSelect j(caller list menu icon).
kSelect k(SMS settings menu icon).
lSelect l(answering system settings menu icon).
mSelect m(handset settings menu icon).
nSelect n(base unit settings menu icon).
oSelect o(infrared menu icon).
“ ” Example: “Time Settings”
Push the joystick up or down to select the words in quotations shown on
the display.
1"(centre of joystick) imi#
2“Time Settings”i#
3“Set Date & Time”i#
4Enter the current day, month and year.
5Enter the current hour and minute.
6#i{ih}
Feature Operation
Making a call Dial the phone number. i{C}/{s}
Answering a call {C}
Hanging up {ih}
Receiver/speaker volume Push the joystick up or down while on a call.
Last number redial B(right soft key) i{C}
{ih}
"/#
R
TCD820E_QG(e).fm Page 2 Wednesday, July 13, 2005 5:40 PM
Black process 45.0° 60.0 LPI

–3 –
Answering system
Making a call with redial list B(right soft key) iPush the joystick up or down
to select the desired number. i{C}
Handset phonebook: storing an
entry (name, phone numbers,
picture)
A(left soft key) i"i“New Entry”i
#i“Name”i#iEnter the party’s name
(16 characters max.). i#i“Phone No. 1”
i#iEnter the party’s phone number (24 digits
max.). i#i“Picture”i#i
“Preset Pictures”or “User Pictures”i#
iPush the joystick up or down to select the desired
picture. i#i“Category 1”i#i
Select the desired category. i#i“<Save>”
i#i{ih}
LYou can store up to 3 phone numbers for each entry.
LTo enter a name, see the character table in the
operating instructions.
Handset phonebook: making a
call
A(left soft key) iPush the joystick up or down to
display the desired entry. i{C}
LIf more than 1 phone number is assigned to the
entry, press {C}/y. iSelect the desired
phone number. i{C}
Handset ringer volume "(centre of joystick) imi#i“Ringer
Setup”i#i“Ringer Volume”i#
iPush the joystick up or down to select the desired
volume. i#i{ih}
Changing ringtone
(outside calls)
"(centre of joystick) imi#i“Ringer
Setup”i#i“Ext. Ringtone”i#
i“Preset Ringtones”or “User Ringtones”
i#iSelect the desired ringtone. i#i
{ih}
Feature Operation
Answering on/off "(centre of joystick) ili#iai
{ih}
Listening to messages "(centre of joystick) ili#i“Play
New Msg.”or “Play All Msg.”i#
Feature Operation
TCD820E_QG(e).fm Page 3 Wednesday, July 13, 2005 5:40 PM
Black process 45.0° 60.0 LPI

–4 –
5Frequently asked questions
Question Cause & solution
What kind of power outlet
should I connect the AC
adaptor to?
Connect the AC adaptor to a 220–240 V outlet.
Why is wflashing? LThe handset is too far from the base unit. Move closer.
LThe AC adaptor is not connected. Check the
connections.
LThe handset is not registered to the base unit. Register it.
"(centre of joystick) imi#i
“Registration”i#i“Register H.set”i
#iSelect a base unit number. i#iPress
and hold {x} on the base unit for about 3 seconds, until the
registration tone sounds. iWait until “Enter Base
PIN”is displayed. iEnter the base unit PIN (default:
“0000”). i#
Why is the handset display
blank?
The handset is not turned on. To turn the power on, press
{ih} until a short beep sounds.
What should I do when the
handset does not turn on?
LMake sure that the batteries are installed correctly.
LFully charge the batteries.
LClean the charge contacts and charge again.
How long should I charge new
batteries?
Charge the batteries for about 7 hours.
How long is the battery
operating time?
When you are using fully-charged Ni-MH batteries;
Talking: 14 hours max.
Standby: 150 hours max.
LBattery operating time may be shortened over time
depending on usage conditions and ambient
temperature.
When should I replace the
batteries?
If the batteries are fully charged until
! is displayed, but #
is displayed after a few calls, replace the batteries with new
ones.
What is a PIN? The PIN is a 4-digit number that must be entered in order
to change certain handset and base unit settings. The
default PIN for both the handset and base unit is “0000”.
What do I need to do to
display caller information?
You need to subscribe to Caller ID service. Consult your
service provider for details.
TCD820E_QG(e).fm Page 4 Wednesday, July 13, 2005 5:40 PM
Black process 45.0° 60.0 LPI

–5 –
6To use Caller ID and SMS (optional services)
If you subscribe to Caller ID service, you can:
7Sales and support information
.
– display caller information
– identify who is calling by using different display colours and ringtones
(handset phonebook category)
– identify who is calling without looking at the display (audible call)
To use SMS, you must subscribe to Caller ID and/or appropriate service.
SMS (Short Message Service)
Customer Care Helpline Tel. No.: U.K. 08700 100 076 / R.O.I. 01289 8333
Ann
012345
Ann
012345
Ann
Customer Care Centre
LFor customers within the UK: 08700 100 076
LFor customers within the Republic of Ireland: 01289 8333
LVisit our website for product information: www.panasonic.co.uk
LE-mail: [e-mail]
Direct Sales at Panasonic UK
LOrder accessory and consumable items for your product with ease and confidence by
phoning our Customer Care Centre Monday - Thursday 9:00am - 5:30pm, Friday 9:30am
- 5:30pm (Excluding public holidays).
L Or go on line through our Internet Accessory ordering application at www.panasonic.co.uk
L Most major credit and debit cards accepted.
L All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd.
L It couldn t be simpler!
L Also available through our Internet is direct shopping for a wide range of finished products,
take a browse on our website for further details.
TCD820E_QG(e).fm Page 5 Wednesday, July 13, 2005 5:40 PM
Black process 45.0° 60.0 LPI

IMPORTANT
If you have problems setting up or operating this product please call
the Panasonic DECT Helpline
08700 100 076 (UK)
01289 8333 (Repl of Ireland)
TCD820E_QG(e).fm Page 6 Wednesday, July 13, 2005 5:40 PM
Red spot 45.0° 60.0 LPI