Panasonic KX-TCD320E User manual

–1 –
Please read the operating instructions for further details.
Controls
Handset
ASpeaker
BCharge contact
CDisplay
DSoft keys
E{C} (Talk)
FNavigator key
L{e}{v}: To search for the desired
item in menus.
L{>}: To select the desired item or
move the cursor to the right.
L{<}: To return to the previous
screen or move the cursor to the left.
G{s} (Speakerphone)
HDial keypad
LThe icons printed below the dial keys
shown in the illustration (g, d, ■
etc.) indicate answering system
operations.
I{R}(Recall)
JReceiver
K{ih} (Off/Power)
L{C/T}(Clear/Mute)
M{INT}(Intercom)
NMicrophone
C
s
i
h
T
M
N
C
E
F
G
H
I
DK
J
L
B
A
N
a
HG
g
LN
gd
n
n
Digital Cordless Answering System
Model No. KX-TCD320E
Quick Guide
TCD320E_QG(e).fm Page 1 Thursday, January 6, 2005 10:02 PM

–2 –
Base unit
Displays
Display icons
Various icons appear on the handset display to indicate the current status of the unit.
AAnswer on indicator
B{x} (Page)
CCharge contact
B
A
C
wWithin range of a base unit
LWhen flashing: Handset is
searching for base unit. (out
of range of base unit,
handset is not registered to
base unit, no power on base
unit)
xHandset is accessing base unit.
(intercom, paging, changing
base unit settings, etc.)
kHandset is on an outside call.
xCall bar is on.
yMissed call (Caller ID
subscribers only)
uAnswering system is on and/or
new messages have been
recorded.
nAnswering system is full.
dAnswering system will answer
calls with a greeting message
and caller message will not be
recorded.
iBatteries are charging.
1Battery strength
eAlarm is on.
dVoice enhancer is set to high
or low tone.
URinger volume is off.
fNight mode is on.
[2] Handset number: The left icon
shows handset 2 example.
-2- Base unit number: The left
icon shows base unit 2
example.
hNew SMS message received
(SMS users only)
jYour written SMS message is
over 160 characters. (SMS
users only)
mSMS memory is full. (SMS
users only)
{Line is being used by another
handset.
TCD320E_QG(e).fm Page 2 Thursday, January 6, 2005 10:02 PM

–3 –
Menu icons
When in standby mode, pressing the middle soft key reveals the handset’s main menu. From
here you can access various features and settings.
Soft keys
Soft key icons
The handset features 3 soft keys. By pressing a soft key,
you can select the feature or operation indicated by the
soft key icon shown directly above it.
LPressing the left, middle, or right soft key selects the
leftmost, centre, or rightmost soft key icon
respectively.
LThe icons shown will vary depending on how you are
using the unit.
WCaller List
XSMS (Short Message Service)
uAnswer System
YHandset Setup
ZBase Unit Setup
aDisplay Setup
C
s
i
h
T
vReturns to the previous screen.
$Displays the main menu.
,Accepts the current selection.
qDisplays a previously dialled phone
number.
UOpens the phonebook and switches
between handset phonebook and
shared phonebook.
rDisplays the phonebook search
menu.
"Turns the key lock feature off.
pDisplayed when adding or
editing a phonebook entry, or
when writing an SMS
message.
ZStops recording or playback.
sInserts a dialling pause.
wErases the selected item.
tDisplayed when the soft key
has no function.
TCD320E_QG(e).fm Page 3 Thursday, January 6, 2005 10:02 PM

–4 –
Connections
When the AC adaptor is connected, a short beep will be heard. If it is not heard, check the
connections.
Battery installation
Insert the batteries negative (T) terminal first. Close the handset cover. Place the handset
on the base unit for about 7 hours before initial use.
Note:
LUse only rechargeable batteries.
Screen saver mode
Important:
LUse only the AC adaptor and telephone
line cord supplied with this unit.
Note:
LNever install telephone wiring during a
lightning storm.
LThe AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
The backlight will turn off completely after 1 minute
of inactivity if the handset is not on the base unit.
Only essential icons and the date and time will be
displayed, and they will occasionally change
position in order to preserve the life of the display.
To use the handset when it is in screen saver mode,
first press {ih} to turn the display on again.
Example:
(220–240 V, 50 Hz)
To telephone
network
Hooks
17 May 15:30
1
TCD320E_QG(e).fm Page 4 Thursday, January 6, 2005 10:02 PM

–5 –
Turning the power on
Press {ih} for about 1 second.
Setting the date and time
1Press $(middle soft key).
2Select Y, then press ,.
3Select “Time Settings”, then press ,.
4Select “Set Date & Time”, then press ,.
5Enter the current day, month and year by selecting 2 digits for each.
6Enter the current hour and minute by selecting 2 digits for each.
LYou can select “AM”, “PM”or 24-hour time entry by pressing {*} repeatedly.
7Press ,.
8Press {ih}.
Basic operations
Feature Operation
To turn the power off Press {ih} for about 2 seconds.
To make a call Dial the phone number, then press {C}.
To turn on the speakerphone Press {s}.
To hang up Press {ih}.
To adjust the receiver or speaker
volume
Press {e} or {v} while talking.
To redial the last number dialled Press q(right soft key), then press {C}.
To make a call using the redial list Press q(right soft key). Press {e} or {v}
repeatedly to select the desired number, then
press {C}.
To answer a call Press {C}.
To mute your voice during a call Press {C/T}. To return to the conversation, press
{C/T}again.
To store a name and phone number
in the handset phonebook
Press U(left soft key), $, select “New
Entry”, then press ,.
Enter the party’s name (16 characters max.), then
press ,. Enter the party’s phone number (24
digits max.), then press ,. Select the desired
category for the entry, then press ,. Select
“Save”, then press ,. Press {ih}.
LTo enter a name, see the character table in the
operating instructions.
TCD320E_QG(e).fm Page 5 Thursday, January 6, 2005 10:02 PM

PQQW13557YA DC1104MK1015
Answering system
Sales and support information
Customer Care Centre
LFor UK customers: 08700 100 076
LFor Republic of Ireland customers: 01289 8333
LVisit our website for product information: www.panasonic.co.uk
LE-mail: [e-mail]
Direct Sales at Panasonic UK
LOrder accessory and consumable items for your product with ease and confidence by
phoning our Customer Care Centre Monday - Friday, 9:00 am - 5:30 pm. (Excluding public
holidays)
LOr go on line through our Internet Accessory ordering application at
www.panasonic.co.uk
LMost major credit and debit cards accepted.
LAll enquiries transactions and distribution facilities are provided directly by Panasonic UK
Ltd.
LIt couldn’t be simpler!
LAlso available through our Internet is direct shopping for a wide range of finished products,
take a browse on our website for further details.
To make a call using the handset
phonebook
Press U(left soft key). Press {e} or {v}
repeatedly to display the desired entry, then press
{C}.
To adjust the handset ringer volume Press $(middle soft key). Select Y, then
press ,. Select “Ringer Setup”, then press
,. Select “Ringer Volume”, then press
,. Press {e} or {v} repeatedly to select the
desired volume. Press ,, then press {ih}.
To change the ringtone used by the
handset for outside calls
Press $(middle soft key). Select Y, then
press ,. Select “Ringer Setup”, then press
,. Select “Ext. Ringtone”, then press
,. Select the desired ringtone, then press
,. Press {ih}.
Feature Operation
To turn the answering system on/off Press $(middle soft key). Select u, then
press ,. Select “Answer On”or “Answer
Off”, then press ,. Press {ih}.
To listen to new/all messages Press $(middle soft key). Select u, then
press ,. Select “Play New Msg.”or “Play
All Msg.”, then press ,.
Customer Care Helpline Tel. No.: U.K. 08700 100 076 / R.O.I. 01289 8333
Feature Operation
TCD320E_QG(e).fm Page 6 Thursday, January 6, 2005 10:02 PM