Panasonic Palmcorder Palmsight PV-L559 User manual

Panasonic
Palmcorder” PalmSight"
Camcorder
Operating Instructions
PHRASE
TITLER |
Please read these instructions carefully before attempting to cparate this product,
Plaase save this manual,
Guia para rápida consulta en español está incluida.
For assistance, call 1-900-211-PAMNA(7262) VOTWO?30A)

Things You Should Know
Thank you for choosing Panasonic!
You have purchased one of the most sophisticated and reliable products on the market
today. Used properly, it will bring you years of enjoyment. Please take time to fill in the
information below. The serial number is on the tag located on the underside of your
Camcorder. Be sure to retain this manual as your convenient Camcorder information
source.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
Unpack your Camcorder
These accessories are provided in order to set up or use your Camcorder.
1 pc. AC Adaptor 1 pc. Battery Pack 1 pc. Audio/Video Cable
(PV-A17) (PV-BP18) (pages 10, 11) (VJAW0027/VJAW0032/
with DC Power Cable VJAW0039) (pages 29, 31)
(page 12)
a,
ESA
1 pc. VHS PlayPak 1 pc. Shoulder Strap 1 pc. Remote Contro! Holder
(PV-P1/VYMW0009) and (VYCW0225) (page 14) (VGQ6893) (pages 14, 26)
one "AA” battery (page 30)
1 pc. CR2025 Clock Battery 1 pc. 8-Function Remote (VSQW0038)
(VSBW0004) with one CR2025 Battery. (page 26)
(installed in Camcorder)
(page 49)
€
Remote has been loaded with battery.
(page 49)
2 For assistance, call 1-800-211-PANA(7262)

Things You Should Know
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Your Compact VHS Camcorder is designed to record and play back in Standard Play
(SP) and Super Long Play (SLP) modes. You can also play a Compact VHS
Camcorder recording on your VHS VCR using the VHS PlayPak supplied.
This Camcorder is equipped with the HQ System to provide excellent video pictures,
and is compatible with standard VHS equipment.
It is recommended that only cassette tapes that have been tested and inspected for use
in VCR machines with the MBIN and/or mark be used.
This symbol warns the user that
uninsulated voltage within the unit may
CAUTION have sufficient egos to cause electric
Dixie pre ad Dixie pre ad shock. Therefore, it is dangerous to make
any kind of contact with any inside part of
this unit.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK) This symbol alerts the user that important
NO USER-SERVICEABLE PARTS INSIDE literature concerning the operation and
-Ë REFER SERVICING TO QUALIFIED SERVICE PERSONNEL: § maintenance of this unit has been included
Therefore, it should be read carefully i in
order to avoid any problems.
The above markings are located on the appliance bottom cover.
FCC Warning: Any unauthorized changes or modifications to this equipment would
void the user's authority to operate.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with Part 15 and pan 18 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference
when operated in a residential environment.
If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, use the equipment in another location and/or
utilize an electrical outlet different from that used by the receiver.
If necessary, consult the dealer or an experienced radio/TV technician for help. You may find the
booklet, 'Something About Interference' available from FCC local regional offices helpful.

Important Safeguards
1.
10.
Read Instructions — Alt the safety and operating
instructions should be read before the unit is
operated.
Retain Instructions — The safety and operating
instructions should be retained for future reference.
Heed Warnings — Alt warnings on the unit and in
the operating instructions should be adhered to.
Follow Instructions — All operating and
maintenance instructions should be followed.
Cleaning — Unplug this video unit from the wall
outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a dry cloth for cleaning.
Attachments — Do not use attachments not
recommended by the video product manufacturer
as they may be hazardous.
Water and Moisture — Do not use this video unit
near water — for example near a bath tub, wash
bowl, kitchen sink, or taundry tub, in a wet
basement, or near a swimming pool, and the like.
Accessories — Do not piace this video unit on an
unstable cart, stand, tripod, bracket, or table. The
video unit may fall, causing serious injury to a child
or adult, and serious damage to the unit. Use only
with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the
video unit. Any mounting of the unit should follow
the manufacturer's instructions and should use a
mounting accessory recommended by
the manufacturer. An appliance and
cart combination should be moved
with care. Quick stops, excessive
force, and uneven surfaces may
cause the appliance and cart
combination to overturn.
Ventilation — Stots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the video unit and to protect it from
overheating. These openings must not be blocked
or covered. Never place the video unit on a bed,
sofa, rug, or other similar surface, or near or over a
radiator or heat register. This video unit should not
be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have
been adhered to.
Power Sources — This video unit should be
operated only from the type of power source
indicated on the marking label. [f you are not sure
of the type of power supply to your home, consult
your appliance dealer or local power company. For
video units intended to be operated from battery
power, or other sources, refer to the operating
instructions.
For assistance, call 1-800-211-PANA(7262)
11. Grounding or Polarization — This video unit may
be equipped with either a polarized 2-wire AC
(Alternating Current) line plug (a plug having one
blade wider than the other) or 3-wire grounding
type plug, a plug having a third (grounding) pin.
The 2-wire polarized plug will fit into the power
outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug still fails to fit, contact
your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug.
The 3-wire grounding type plug will fit into a
grounding type power outlet. This is a safety
feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of
the grounding type plug.
12. Power-Cord Protection — Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or:
against them. Paying particular attention to cords of
plugs, convenience receptacles, and the point
where they exit from the unit.
13. Outdoor Antenna Grounding — If an outside
antenna or cable system is connected to the video
unit, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Part 1 of
the Canadian Electrical Code, in USA Section 810
of the National Electrical Code, provides
information with respect to proper grounding of the
mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna
discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
o ANTENNA
“LEAD IN
WIRE
OISCHAAGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 610-21)
GROUND CLAMPS
POWER SEAVICE GROUNDING
=a ELECTRODE SYSTEM
NEC — NATIONAL ELECTRICAL CODE INEC ART 250, PART H)
14. Lightning — For added protection of this video unit
receiver during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage
to the video unit due to lightning and power-line
surges.

Important Safeguards
15. Power Lines — An outside antenna system should b. If any liquid has been spilled onto, or objects
not be located in the vicinity of overhead power have fallen into the video unit.
lines or other electric light or power circuits, or c. If the video unit has been exposed to rain or
where it can fall into such power lines or circuits. water. A
When instalting an outside antenna system, d. If the video unit does not operate normally by
extreme care should be taken to keep from following the operating instructions. .Adjust only
touching such power lines or circuits as contact those controls that are covered by the operating
with them might be fatal. instructions, as an improper adjustment of other
16. Overloading — Do nat overload wall outlets and controls may result in damage and will often
extension cords as this can result in a risk of fire or require extensive work by a qualified technician
etectric shock. to restore the video unit to its normal operation.
17. Objects and Liquids — Never push objects of. any e. If the video unit has been dropped or the cabinet
kind into this video unit through openings as they has been damaged. x
may touch dangerous voltage points or short out f. When the video unit exhibits a distinct change in
parts that could result in a fire or electric shock. performance — this indicates a need for service.
Never spill liquid of any kind onto the video unit. 20. Replacement Parts — When replacement parts are
18. Servicing — Do not attempt to service this video required, be sure the service technician has used
` unit yourself as opening or removing covers may . replacement parts specified by the manufacturer or
expose you to dangerous voltage or other hazards. have the same characteristics as the original part. ~
Refer all servicing to qualified service personnel. Unauthorized substitutions may result in fire,
19. Damage Requiring Service — Unpiug this video electric shock or other hazards.
unit from the wall outlet and refer servicing to 21, Safety Check—- Upon completion of any service or
qualified service personne! under the following i repairs to this video unit, ask the service technician
conditions: to perform safety checks to determine that the
a. When the power-supply cord or plug is video unit is in safe operating order.
damaged.
Precautions
AO E aain
USE & LOCATION
¢ TO AVOID SHOCK HAZARD ... Your Camcorder and power supply should nat be exposed to rain or moisture.
Do not connect the power supply or operate your Camcorder if it gets wet. Your Camcorder has been designed
for outdoor use, however it is not designed to sustain direct exposure to water, raín, sleet, snow, sand, dust, or
a direct splashing from a pool or even a cup of coffee. This action could permanently damage the internal parts
of your Camcorder. Do not attempt to disassemble this unit. There are no user serviceable parts inside. Unplug
your Camcorder from the power supply before cleaning.
¢ DO NOT AIM YOUR CAMCORDER AT THE SUN OR OTHER BRIGHT OBJECTS.
* DO NOT LEAVE THE CAMCORDER WITH THE EVF AIMED DIRECTLY AT THE SUN AS THIS MAY CAUSE
DAMAGE TO THE INTERNAL PARTS OF THE EVF.
* DO NOT EXPOSE YOUR CAMCORDER TO EXTENDED HIGH TEMPERATURE ... Such as, in direct sunlight,
inside a closed car, next to a heater, etc... This action could permanently damage the internal parts of your
Camcorder.
f
;
f
:
» AVOID SUDDEN CHANGES IN TEMPERATURE ... If the unit is suddenly moved from a cold place to a warm
place, moisture may form on the tape and inside the unit.
* DO NOT LEAVE YOUR CAMCORDER OR THE POWER SUPPLY TURNED ON WHEN NOT IN USE.
* STORAGE OF YOUR CAMCORDER ... Store and handle your Camcorder in a manner that will not subject it to
unnecessary movement (avoid shaking and striking). Your Camcorder contains a sensitive pick-up device which
could be damaged by improper handling or storage.
CARE
* TO CLEAN YOUR CAMCORDER ... Do not use strong or abrasive detergents when cleaning your Camcorder
body.
+ TO PROTECT THE LENS ... Do not touch the surface of the lens with your hand. Use a commercial camcorder
lens solution and lens paper when cleaning the lens. Improper cleaning can scratch the lens coating.
* TO PROTECT THE FINISH OF YOUR CAMCORDER ... Before handling your Camcorder, make sure your
hands and face are free from any chemical products, such as suntan lotion, as it may damage the finish.

Table of Contents
Getting Started
Things YOU Should KNOW 0 A is 2
important SafegúardS- ni AS A EAS 4
PFC INN NS da A it ico Ee 5
SIGUE DOMO Mol eireas aa iaa 7
Quick Operation Gud sai rio aea iaaea iii 8
SUPPIyINg POWER 10
Cassette IOMA rata ironia las 13
Attaching Shoulder Strap/Remote Holder... oconoocoononconccanoarncn naar cnanano conan cnonanoconano conos 14
MENU MOJO... cios setéssieenivevainecestveevenss AEREE E A os ect ST 15
Setting tha Clock A ia ei arer sri ere EA O a aeai aes 17
Büilt-in Auto Lit rie 20
Basic Operation
Camera PAS CONG va dana dia 21
8-Function Remote Control. iii atada 26
Playing Back Recordings us iaa hues Paveifviste hoy sed 27
Copying your Tapes (dubbing) .........oococooooonoononooconnorncnanncnacaninacacnanacaronarronvonerrorerooraraoranna 31
Special Features l
Four-Speed Power ZOOM AA rinne 32
Backlight aa eniti a aE eaves Pe lew raed a AE a aaae E oi iaasa 32
FOCUS E EA ven vest EEE EE P E EE E E A E E T 33
High Speed SN Fassia ire vrs eerphsetri sea tcccaebsiictacat eadeaies x Salat nop eacc hese. wonaun aie wtavais GiesvBonieheaaa sito: 34
Jally CAIN A TN 35
PUNO Fade pd a ai risa 36
Color Digital Fado O Sa 37
Digital ZOOM a2 saskurin vanditeuerestetetvaiticult dd cevsani TENEAN EE AE EEA toes ae A a 38
Digital Electronic Image Stabilization (E.1.S.) .....oonooncccninnocaninoncnnonaccccrcronrorornannornnanonananos 39
OCU MO nana ads 40
Time LAA ia ie 41
INTIMISTA cc daa 42
For Your Information
Viewfinder/LCD Monitor Indications ...........oomoonnnnnnninirncaronanan ona racinaco a 45
Operation NOES dianne neninn aeia NE chiswe E a SAA T 48
Replacing Clock/Remote Battery ....ooooocoococonicconocccnaonnnnacononaoronoroonn orar rana rana ar nano rar ar ranannass 49
Palmcorder Accessory System ..ooooocoononicocccoiorconars AN ds 50
Palmcorder Accessory Order Form .o......cccccccccesccssccssccsssescccevscecesseeceaceceeceeesevecsarectuecerenes 51
SECC MO a tias: 52
Before Requesting Service ...........coonnnnccocccaniononnoronooronrorononr crono nara r caca rr nonarnonanoonaon cc annc casero 53
Request for Service Notice ...............o.oooooonnoccnnccccnnanirinnnononoornnorononrnnonanrnorannna saranane. 54
A NN 55
A E tinea 57
Spanish Quick Use Guide/Guía Para USO Rápido ......oooonocooncccoonccicononnc conoce nacnanacarononinn 59
6 For assistance, call 1-800-211-PANA(7262)

Self Demo Mode
. Self Demo mode is on when the Before you begin...
screen at the right appears. Follow + Connect Camcorder to power source.
the steps below to turn it off.
EVF Screen
Panasonic
ITS TAPES PLAY
IN YOUR VCR
YES, ITS VHS!
26x LENS / 150x D. ZOOM
DIGITAL STABILIZATION
FULL-SIZE HEAD SYSTEM
AUTO/PHRASE TITLER
1 Set POWER to CAMERA.
2 Hold down STOP over 5 seconds.
Note:
e Self Demo stops automatically if
battery is attached (page 10) and
cassette tape is inserted (page 13).
* Inserting a tape alone (or attaching a
partially charged battery) only temporarily
stops Self Demo.
* Self Demo stops for 30 seconds when a
function key other than Power, Tape
Speed Selector, and Light is pressed.
To turn Self Demo back on.
e With DISPLAY held down, slide POWER
to CAMERA and wait for Self Demo to
begin.

Quick Operation Guide
Charge Battery Pack fully before operation (page 10).
2 Insert Battery.
CHARGE Lamp
lights and then goes
out when charging is
done. ;
Insert Cassette
2 Slide TAPE EJECT to open door.
1 Attach fully charged Battery
(page 10).
3 Insert cassette (page 13).
Press here to close door.
Camera Recording
` When the LCD monitor is fully open, the Viewfinder automatically turns OFF (page 22).
2 Set POWER to
CAMERA.
War | IL, CAMERA
1 Press LCD-OPEN to unlock the 3 i
LCD monitor. Swing it fully open Press RECORD/PAUSE to start
and adjust the angle. recording.
Press RECORD/PAUSE again to
pause recording.
“ee
8 For assistance, call 1-800-211-PANA(7262)

Quick Operation Guide
Playback using the LCD Before you begin...
¿ * Charge Battery Pack fully before operation
Monitor
(page
10).
When the LCD monitor is fully open, the
Viewfinder automatically turns OFF (page 27).
LaS
1 Press LCD-OPEN to
unlock the LCD monitor.
Swing it fully open and
adjust the angle.
2 Set POWER to VCR.
3 Press REWIND/SEARCH
to rewind tape.
4 Press PLAY to
Start playback.
5 Press STOP to
stop playback.

Supplying Power
Charge Battery Pack fully before use.
Plug in AC Adaptor.
POWER Lamp lights.
2 Insert Battery.
@ Align right side of Battery with line
on AC Adaptor.
© Press Battery down and slide in .
direction of arrow.
CHARGE Lamp lights and then goes
out when charging is done (approx.
1 and 1/2 hours).
CHARGE
Lamp
3 Remove Battery
Slide Battery out and off.
Note: e Battery life gradually decreases after
After recharging 5 times, use BATTERY repeated use and recharging. If operation
REFRESH feature as explained on page 11. time becomes very short even after a
sufficient charge, discard Battery properly
(page 11).
Use the Battery Pack
A fully charged Battery provides a maximum of about 2 hours of continuous use (LCD
monitor off) or about 1.5 hours (LCD monitor on). Actual time may vary due to operating
conditions. Using the Built-in Light decreases operating time.
1 Attach Battery
@ Align Battery with top of mounting
surface.
© Press and snap into place.
\
\ 2 Remove Battery
While sliding BATTERY RELEASE,
remove Battery.
10 For assistance, call 1-800-211-PANA(7262)

Supplying Power
"Battery Refresh |
This feature completely discharges Battery before recharging begins.
Use after about every 5 charges for optimum Battery performance.
CHARGE Lamp
l 1 Plug in AC Adaptor.
« POWER Lamp stays on as long as
Adaptor is plugged in.
)
Place Battery into Adaptor.
1 3 Press BATTERY REFRESH.
The CHARGE Lamp flashes during
discharge then stays lit until charging
is complete.
lf BATTERY REFRESH is pressed
by mistake, remove Battery from
3 BATTERY Adaptor and reinsert it for normal
REFRESH charging.
4 Remove Battery.
* Charging takes about 7 and 1/2 hours
when Battery Refresh is used.
* Battery will not operate in extremely high
temperatures:
Battery Care
Caution: To avoid Battery damage:
* Charge only with specified charger. * Do not drop or jar Battery.
* Battery can be charged within a temperature * Use Battery with specified units only.
range of 50° F (10° C) and 95° F (35° C). » If Battery is used in extremely high
* Battery is normally warm after charging or just temperatures, a safety device will
after use. automatically.prevent operation.
+ Do not use an insufficiently charged or worn-
out Battery. To prolong Battery life:
+ While not in use, remove Battery from the '
Camcorder and AC Adaptor and store ina
cool, dark, dry place.
* Keep Battery terminals clean.
Safety precautions:
* Do not get Battery near, or dispose of in fire.
* Do not directly connect (short circuit) the
positive (+) and negative (—) terminals.
* Never attempt to disassemble or reassemble
Battery.
U.S.A. CONSUMERS:
ATTENTION:
The product you have purchased is powered by a nickel cadmium battery which is
recyclable. At the end of its useful life, under various state and local laws, it is illegal to
dispose of this battery into your municipal waste stream. Piease call 1-800-8-BATTERY
NiCd for information on how to recycle this battery.
La
11

Supplying Power
| AC Adaptor |
DC Power Cable
Connect AC Adaptor VCR DC OUT
á to Camcorder DC IN with supplied
DC |
POWER Lamp i ieee 9 DC Power Cable.
Ne
* AC Adaptor cannot power Camcorder while
VCR DC OUT Connector charging Battery.
¢ When not in use, unplug AC Adaptor from AC
outlet. (Adaptor uses 1.2 W of electricity while
plugged in.)
Plug in AC Adaptor.
POWER Lamp lights.
CAUTION:
This unit will operate on 110/120/220/240V AC. An AC plug adaptor may be
required for voltages other than 120V AC. Please contact either a local or foreign
electrical parts distributor for assistance in selecting an alternate AC plug.
We recommend using the accessory power plug adaptor (VJSS0070) in an area
which has specia! AC outlets.
Car Battery Cord (Optional)
Connect PV-C16 Car Battery Cord
(optional) to Camcorder DC IN.
2 A Start engine first.
B Plug Car Battery Cord into
Cigarette lighter socket.
* If Car Battery cord fuse needs
replacing, use exact current rating
(in amps).
DC IN
Connector f
Cigarette Lighter Notes:
Socket (12V) * This cord only works in vehicles equipped
ee with DC 12V (negative ground) battery.
Check with your car/truck dealer. Use
only specified car battery cord.
* To avoid blowing the car battery cord
fuse, do step 2 in the proper order.
* Running vehicles must be well ventilated.
+ When not in use, disconnect cigarette
Car Battery Cord Cigarette
(optional) Lighter Plug lighter plug.
12 ‘ For assistance, call 1-800-211-PANA(7262)

Cassette Information
Cassette Insertion/Removal
Turn Tape Wheel in direction of
arrow until there is no slack.
Attach Battery (page 10).
Insert cassette as shown.
1
2
3 Slide TAPE EJECT to open door.
4
9
Press here to close door.
e To remove the cassette, slide the
TAPE EJECT switch.
Record/Playback Time
Use tapes with the [VASIH mark in this unit. TAPE SPEED Selector
Tape Speed Cassette type
Selector Position | TC-20 TC-30 TC-40
SLP
1
hour
1
hour
2
hours
(Super
Long
Play)
30
minutes
+ SLP playback may contain more picture noise. -
Erase Protection Tab
1 To prevent erasure,
break off tab with screwdriver.
(Or, slide tab open.)
2 To record again,
cover hole with adhesive tape.
(Or, slide tab closed.)
13

Attaching Shoulder Strap/Remote Holder
Remove Battery Pack before doing steps.
Undo strap ends from buckles.
2 Remove one buckle.
3 O Thread strap (with no buckle)
through Remote Holder so it
.faces outward.
Ə Replace buckle.
Thread strap ends through Strap
Rings on Camcorder.
Re-insert the strap ends into
buckles.
Insert Remote into Holder when not
in use.
Pull a loop of strap from buckle.
Pull strap tight to shorten or
lengthen.
Adjust Hand Strap length to fit your
hand as shown.
For assistance, call 1-800-211-PANA(7262)

Using MENU Mode
an
DISPLAY MENU
Before you begin...
« Connect Camcorder to power source.
* Set POWER to CAMERA.
2
3
4
Note:
MENU Mode
Press MENU for MENU mode.
STAND-BY Ri
CLOCK SET
¥
SELECT: PUSH ¥/a KEY
SET : PUSH DISPLAY KEY
Press UP A or DOWN _¥ to
highlight menu item.
Press DISPLAY to set selection.
Press MENU to exit.
* The Menu mode is canceled if UP/
DOWN(4/¥), DISPLAY, or MENU are
not pressed within 5 minutes.
15

MENU Mode
16
--- MENU --- PAGE 1/2
PROGRAMMED REC
TITLE ; AUTO/MANUAL
TALLY LAMP ; ON
STAND-BY RELEASE ; OFF
GLOCK SET
SELECT: PUSH V/A KEY
SET : PUSH DISPLAY KEY
END : PUSH MENU KEY
Oh WN =
6 A PAGE 2/2
TIME LAPSE ; OFF
7—+ SECURITY: OFF
VIDEO EFFECTS ; FADE
8 BLACK
SELECT: PUSH V/A KEY
SET : PUSH DISPLAY KEY
END : PUSH MENU KEY
PROGRAMMED REC (page 25).
Camcorder starts and stops
recording at a preset time.
TITLE (pages 42-44).
_AUTO/MANUAL : 16 items
PHRASE : 10 items
TALLY LAMP (page 35).
ON: lamp lights during recording.
STAND-BY RELEASE (page 23).
ON: enables quick resumption of
recording from Stand-by mode.
CLOCK SET (pages 17~19).
Select to set clock.
TIME LAPSE (page 41).
ON: enables TIME LAPSE recording.
SECURITY (page 40).
MOTION: enables Motion Security
recording.
VIDEO EFFECTS (pages 36, 37).
AUTO FADE : BLACK or WHITE
DIGITAL FADE: TYPE = 7 types
COLOR — 8 colors
For assistance, call 1-800-211-PANA(7262)

Setting the Clock
Set the following items in order: Time Zone, Daylight Saving Time, Date and Time.
, : Before you begin...
Setting the Time Zone e Connect caro to power source.
+ Set POWER to CAMERA. |
Note:
« Setting POWER to VCR also displays
CLOCK SET menu.
e Clock may lose or gain up to 2 minutes per
month. To adjust, see page 19.
The Camcorder is preset to Eastern time.
To change time zone, do steps at right.
Os
or
DISPLAY MENU
1 2 3 A 1 Press MENU for MENU mode.
EA Press UP A or DOWN Y to select
CLOCK SETS
Y
SELECT: PUSH W/a KEY
SET : PUSH DISPLAY KEY
END : PUSH MENU KEY
2 Press DISPLAY for CLOCK SET
menu. Press UP A or DOWN Y to
select Z.. CLOCK SET ---
TIME ZONER ; EASTERN
D. $. T, ; AUTO
DATE/TIME : 12:00 : 00AM
JAN 1 1999
SELECT: PUSH V/A KEY
SET : PU
ISH DISPLAY KEY
END : PUSH MENU KEY
Press DISPLAY for SELECT TIME
ZONE menu. Press UP A or
DOWN Y to select local time zone.
--- SELECT TIME ZONE ---
ATLANTIC PACIFIC
EASTERN
Cl HAWAII ENTRAL
MOUNTAIN. SAMOA
y
SELECT: PUSH V/d4 KEY
SET : PUSH DISPLAY KEY
4 Press DISPLAY to confirm entry.
Press MENU twice to exit.
e When traveling, repeat these steps
and select one of the 8 listed time
zones to set the clock to local time.
Note:
When traveling outside the listed time zones,
set clock to local time manually (page 19).
17

Setting the Clock
Clock will auto-adjust to daylight-saving
time (DST).
The Camcorder is preset to DST:
¡AUTO Ma Samira) laure mu
ICAO FF [RO
following steps.
Spring (First Sunday in April):
DST: AUTO = ahead one hour.
1:00 a.m. 2:00 a.m,
:
Daylight
Saving
:
Time
Autumn (Last Sunday in October):
DST: AUTO = back one hour.
Daylight Saving 1:00 a.m, 2:00 a.m.
Time
Normal Time
3:00 a.m. 4:00 a.m.
e a
4:06 a.m. 2:00 a.m.
Before you begin...
+ Connect Camcorder to power source.
` + Set POWER to CAMERA.
Note:
* When POWER is set to VCR, CLOCK SET
menu appears.
¢ Auto DST does not function if time zone is
set to Hawaii or Samoa (page 17).
1 Press MENU for MENU mode.
Press UP A or DOWN ¥ to select
¡00453
TALL +
STAND-BY RELEASE ; OFF
CLOCK SET
¥
SELECT: PUSH ¥/& KEY
SET : PUSH DISPLAY KEY
ENG : PUSH MENU KEY
2 Press DISPLAY for CLOCK SET
menu. Press UP A or DOWN Y to
select DEJA.
--- CLOCK SET ---
TIME ZONE ; EASTERN
DST ; AUTO
DATE/TIME ; 12: 00:00AM
JAN 1 1999
SELECT : PUSH F/A KEY
SET : PUSH DISPLAY KEY
ENO : PUSH MENU KEY
3 Press DISPLAY for DAYLIGHT
SAVING TIME menu. Press UP A or
DOWN Y to select OFF or AUTO.
- - DAYLIGHT SAVING TIME - -
AUTO
OFF
SELECT : PUSH W/& KEY
SET + PUSH DISPLAY KEY]
Press DISPLAY to confirm entry.
Press MENU twice to exit.
1 8 For assistance, call 1-800-211-PANA(7262)

Setting the Clock
Before you begin... o
+ Connect Camcorder to power source.
Date and time including leap year are * Set POWER to CAMERA.
calculated up to DEC 31, 2097.
Note:
e When POWER is set to VCR, CLOCK SET
menu appears.
1 Press MENU for MENU mode.
Press UP A or DOWN ¥ to select
CLOCK SETH
Ot
Y
SELECT: PUSH V/4 KEY
SET : PUSH DISPLAY KEY
END : PUSH MENU KEY
2 Press DISPLAY for CLOCK SET
menu. Press UP 4 or DOWN Y to
selecta .
--- CLOCK SET ---
TIME ZONE ; EASTEAN
D. S. T. $
; 12 : 00: 00AM
JAN 1 1999
SELECT: PUSH W/a KEY
SET : PU PUSH DISPLAY KEY
END : PUSH MENU KEY
3 Press DISPLAY for DATE/TIME
menu.
-+- DATE/TIME SETTING + + +
sis nx z
-12-00:00AM-
JAN 1 1999
SELECT: PUSH W/a KEY
SET : PUSH DISPLAY KEY
4 Press or hold down UP A or
DOWN Y to select hour, then press
DISPLAY to fix.
Repeat for minute, month, day, and
year. Clock starts when year is
entered.
Press MENU twice to exit.
19

Built-in Auto Light-
Using the Light
For recording in dim lighting.
Use only replacement bulb (PART NO.
VLLW0015) supplied by Panasonic to
reduce risk of fire.
Handle new bulb with cloth or tissue as
skin oils will decrease bulb life.
Remove lens cover and allow bulb to
cool before replacing to avoid possible
burn hazard.
Before you begin...
. Connect Camcorder to power source.
¢ Set POWER to CAMERA.
Set LIGHT to AUTO.
Light turns on/off automatically according
to lighting conditions.
Or, set LIGHT to ON/OFF manually.
=D appears in EVF when Light is on.
Caution:
Light becomes hot. Never cover Light while
on.
Before you begin...
¢ Order Part No. VULSO001 (VLLW0015 and
cushions) for replacement bulb unit.
+ Set POWER to OFF.
1 Press in on both sides of lens
cover and pull straight out and off.
2 Using Tweezers or needle-nose
pliers, carefully remove bulb.
* Take unit to service center if you
need assistance.
3 Replace bulb using a clean cloth or
tissue.
4 Replace lens cover.
Note:
* Using Light reduces battery operating time.
* Provide proper ventilation when using Light
extensively in hot environment.
* Using Light when the Camcorder is powered
by a car battery may shorten bulb life.
* Set Light to OFF when not in use.
* Handle bulb gently. Excessive force may
cause bulb to crack.
20 For assistance, call 1-800-211-PANA(7262)