Panasonic RX-D21 User manual

Portable Stereo
CD System
Operating Instructions
Model No. RX-D25
RX-D21
Note:
“EB” on the packaging indicates the United Kingdom.
Before connecting, operating or adjusting this
product, please read these instructions completely.
Please keep this manual for future reference.
Power sources
Memory back-up
During power supply interruption, memory back-
up batteries (not included) save CD programs and
radio stations you have set.
These batteries do not power the unit.
(R6/LR6, AA, UM-3)
When to change the batteries
The batteries last about a year.
Connect the unit to AC power before replacing
the batteries.
• Before connecting or disconnecting the AC
mains lead, stop the tape and switch
[] to “TAPE/ ” to turn the unit off.
The memory batteries are worn out faster if
the cord is disconnected with the power still
on.
Removing the batteries
Press the negative end of the number 4 battery
and remove the batteries. (Remove the power
batteries first.)
Using a household AC outlet
FOR UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 7 BEFORE CONNECTION.
Connect the AC mains lead firmly to the unit and
the outlet.
Note
• The included AC mains lead is for use with
this unit only. Do not use it with other
equipment.
• The function selector switch does not separate
entire unit from mains even if in “TAPE/ ”
position.
Using batteries (not included)
The unit cannot be powered by batteries if the
AC mains lead is connected.
(R20/LR20, D, UM-1)
When to change the batteries
Sound quality and operations are affected when
the batteries are running low. Replace all six
batteries. It is also a good idea to replace all the
batteries before recording.
Removing the batteries
Open the battery cover
and insert your finger in
the hole on the bottom
of the unit and push out.
RQT6744-B
To household AC outlet
AC mains lead
(included)
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
These operating instructions fundamentally explain the operation of
RX-D25.
Supplied accessories
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for replacement
parts.
AC mains lead .......................................................................... 1pc.
For United Kingdom: (RJA0053-2X)
For Australia and New Zealand: (RJA0035-X)
For others: (RJA0019-2K)
Remote control transmitter RX-D25 only ............................. 1pc.
(EUR648258)
The illustrations show RX-D25.
EB GN E
Inner row
Outer row
For the United Kingdom and Republic of Ireland
www.panasonic.co.uk (for UK customers only)
• Order accessory and consumable items for your product with ease and
confidence by telephoning our Customer Care Centre Mon–Friday 9:00 am–
5:30 pm.
(Excluding public holidays.)
• Or go on line through our Internet Accessory ordering application.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are provided directly by
Panasonic UK Ltd.
• It couldn’t be simpler!
Customer Care Centre
For UK customers: 08705 357357
For Republic of Ireland customers: 01 289 8333
Technical Support
For UK customers: 0870 1 505610
This Technical Support Hot Line number is for Panasonic PC software
related products only.
For Republic of Ireland, please use the Customer Care Centre number
listed above for all enquiries.
For all other product related enquiries, please use the Customer Care
Centre numbers listed above.
shop@
P1-2 11/18/02, 5:38 PM1

RQT6744
2
These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices
easily influenced by magnetism.
FM mode select/CD stop
/program clear button
( FM MODE/CLEAR)
RX-D25 only
RX-D25
RX-D21
TUNER
H.E.S. XBS
CD
Main unit:
/CLEAR
/
–/ /+
/
RX-D25 only
Remote control RX-D25 only :
The functions of the buttons without descriptions are the same as on
the main unit.
Battery installation
Insert the batteries (not included)
observing the correct polarities (e,d).
Operation notes
•Do not place obstacles between the remote control signal sensor and
the remote control unit.
•Do not expose the remote control signal sensor to direct sunlight or to
the bright light of fluorescent light.
•Take care to keep the remote control signal sensor and end of the remote
control unit free from dust.
To prevent damage
•Never place heavy items on it.
•Do not disassemble or reconstruct it.
•Do not spill water or other liquids into it.
Correct method of use
Concerning the remote control
Transmission
window
About 7 meters in front
of the signal sensor
Remote control
signal sensor
1
2
R6, AA, UM-3
RX-D25 only
Controls
P1-2 11/18/02, 4:05 PM2

RQT6744
3
1Switch [ ] to “TUNER”.
(Unit comes on.)
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
2Press [BAND] to select “FM” or “AM”.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
3(Omit this step if using the remote control)
If “ ” is on the display, press
[TUNE MODE] to clear it off.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
4Press [–/g] or [f/+] to
tune to the desired station.
The frequency changes one step
each time a button is pressed.
Automatic tuning
Keep [–/
g] or [f/+] depressed and release when the frequency
display starts to change. A station with good reception is automati-
cally selected and the process stops.
To stop automatic tuning, press [–/
g] or [f/+] again.
Note
Automatic tuning may stop on a frequency where there is no station if
there is interference. Press [–/
g] and [f/+] to tune if this occurs.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
5Adjust the volume.
To use auto scan
You can search for a station by listening to all tuned-in stations for 8
seconds each.
Preparation: Switch [ ] to “TUNER”.
1. Press [BAND] to select “FM” or “AM”.
2. Press [AUTO SCAN].
Auto scan starts.
3. Press [AUTO SCAN] when you find the desired station.
Auto scan ends when it reaches the original frequency again.
To stop during the process, press [AUTO SCAN].
To improve reception
FM: Extend the whip antenna and adjust its direction.
AM: Adjust facing of the unit.
If noise is excessive in the FM stereo mode
Press [FM MODE]. (“ ” lights up.)
Sound will be produced in monaural, but this also reduces noise.
Press the button again to cancel. (“ ” goes out.)
Preset the stations (twelve FM and twelve AM) to make tuning simpler.
Preparation: Tune to the desired station.
(Do steps 1–4on the left.)
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
1Press [MEMORY].
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
2While “ ” and the frequency are
flashing
Press [MEMORY].
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
3While “ ” and the preset channel
are flashing
Press [–/g] or [f/+] to
select the desired channel.
(Remote control: [44
44
4] or [33
33
3])
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
4Press [MEMORY].
(This completes presetting.)
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Repeat the above to preset other stations.
Note
If “ ” goes off during presetting, return to step 1.
11
11
1 Press [BAND] to select “FM” or “AM”.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
2 (Omit this step if using the remote control)
Press [TUNE MODE] to display
“”.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
3 Press [–/ g] or [f/+] to select
the desired channel (1–12).
(Remote control: [44
44
4] or [33
33
3])
To use preset scan
You can search for a station by listening to all preset channels for 8
seconds each.
1. Do steps 1 to 2 above.
For remote control, replace [– /
g] or [f/+] described below with [44
44
4]
or [33
33
3].
2. Press and hold [–/
g] or [f/+] until “PS” appears on the display.
3. Press [–/ g] or [f/+] when you find the desired channel.
Preset scan ends after searching through each preset channel once.
To stop during the process, press [–/
g] or [f/+].
Normal tuning Preset tuning
The Radio
To listen to preset channels
How to preset
Indicates
auto scan
Indicates
preset scan
“” lights when an FM stereo
broadcast is being received.
Preset channel
Preset channel
3
2
15 4
1
23
124 3
P3-4 11/20/02, 11:25 AM3

RQT6744
4
1Switch [ ] to “CD”.
(Unit comes on.)
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
2Push [c CD OPEN/CLOSE] to
open the CD lid and insert the
CD.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
3Push [c CD OPEN/CLOSE] to
close the CD lid.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
4Press [-/
J] to start play.
Play starts from the first track and
continues to the last track.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
5Adjust the volume.
To stop play
Press [L].
“NO DISC” is displayed if there is no disc in the unit.
Note
• If interference occurs to radios or televisions, place the unit as far as
possible from this equipment.
• Do not press [c CD OPEN/CLOSE] during play, pause or immediately
after you inserted the CD and closed the CD lid. CD may be scratched.
You can program up to 24 tracks.
Ensure CD is stopped before programming.
1Press [–/g] or [f/+] to
select the desired track.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
2Press [MEMORY].
The track is programmed.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Repeat steps 1and 2until you have
programmed all the tracks you want.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
3Press [-/
J].
Play starts in the programmed order.
To stop play
Press [L].
“P” is displayed indicating that the program is still active.
Press [L] again and “CLr” is displayed; the program is cleared, and the
normal play mode is restored.
To check program contents
Press [–/
g] or [f/+] when “P” is displayed.
Display
“— —:— —”: Program equals, or exceeds, 100 minutes but program-
ming and play are still possible.
“FULL”: 24 tracks have already been programmed. The program is
full.
Normal play Program play
CD play modes
You can repeat one track ( ), all tracks ( ) or play the tracks in
random order ( ).
Press [CD PLAY MODE] before or during playback to select
the desired mode.
off (no indication)
These modes remain active until cancelled.
You can use repeat mode with program play.
Note
Random and program play cannot be done at the same time.
CDs
To pause
To search forward/
backward
To skip forward/
backward
Press [-/
J] during playback.
To resume, press [-/
J].
Hold down [–/
g] (backward) or [f/+]
(forward) during playback or when paused.
Press [–/
g] (backward) or [f/+]
(forward) during playback or when paused.
Elapsed play time
Track number in play
Total playing time
Total number of tracks
Label must face
upward.
Total play time of
programmed tracks
Program order
Specified track number
Track number Play time
5
1
4
23
123
This unit can play CD-DA (digital audio) format audio CD-R that has
been finalized (a process that enables CD-R players to play audio
CD-R) upon completion of recording.
It may not be able to play some CD-R due to the condition of the
recording. It cannot play CD-RW.
P3-4 11/20/02, 11:26 AM4

RQT6744
5
This unit is suitable for playing normal tapes, but high and metal position
tapes will not be played to their full potential.
1Switch [ ] to “TAPE/S”.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
2Press [L/cSTOP/EJECT] to open the
deck and load a cassette.
Close deck by hand.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
3Press [/PLAY] to start play.
Unit comes on and play starts.
Note
• The unit is on in the pause mode. Stop tape to turn the unit off by pressing
[L/cSTOP/EJECT] when leaving the unit.
• Do not press [/PLAY] when rewinding or fast-forwarding, as this may
jam the tape.
Be sure to press [L/cSTOP/EJECT] before the next operation.
Full auto-stop
The automatic stop system will release the buttons when the tape reaches
the end during play, recording, fast forwarding or rewinding.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
4Adjust the volume.
To stop play
Press [L/cSTOP/EJECT]. (Unit is switched off.)
You can record radio broadcasts or CDs.
Before recording
• This unit is suitable for recording normal tapes, but it cannot record
onto high and metal position tapes to their full potential and prior
recordings will not be erased correctly.
• The recording level is set automatically.
• Take up the leader tape before proceeding.
1Press [L/cSTOP/EJECT] to open
the deck and load a cassette.
Close deck by hand.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
2Select the source to be recorded.
When recording radio broadcasts
Tune in the station.
(Do steps 1–4of “Normal tuning” on page 3.)
When recording CDs
Insert the CD to be recorded.
(Do steps 1–3of “Normal play” on page 4.)
If you want to record programmed tracks, program desired
tracks before proceeding to step 3.
○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○
3Press [[] to start recording.
[/PLAY] is also depressed with [[].
Recording starts (one side only).
The CD also starts playing if in CD mode.
To stop recording
Press [L/cSTOP/EJECT]. (The CD does not stop.)
To stop recording temporarily
Press [JPAUSE]. (The CD does not stop.)
Press once again to resume recording.
To record on the other side of the cassette
Turn the cassette over and press [[].
If the CD finishes before the cassette
Recording continues. Press [L/cSTOP/EJECT] to stop it.
If the cassette finishes before the CD
The CD continues playing. Press [L] to stop it.
Erasure prevention
Use a screwdriver or similar
object to break out the tab.
To re-record on a protected cassette
Cover the hole with adhesive tape.
To erase a tape
1. Set [ ] to “TAPE/ ”.
2. Insert the cassette with the side to be erased facing towards you and
the exposed tape facing up.
3. Press [[].
[/PLAY] is depressed at the same time.
Note
Noise may be recorded if this unit is near a TV. Keep the units at least 1.5
meters apart.
Changes to volume and sound quality do not affect recording.
To prevent interruptions to recording, supply AC power to the unit or re-
place the batteries.
Your attention is drawn to the fact that recording pre-recorded tapes or
discs or other published or broadcast material may infringe copyright laws.
To pause
To rewind/
fast-forward
To find a particular
spot
Press [JPAUSE] during playback.
To resume, press [JPAUSE].
Press [)
REW/REV] (to rewind) or
[(FF/CUE] (to fast-forward) in the stop mode.
Press [)
REW/REV] (to search backward) or
[(
FF/CUE] (to search forward) during
playback.
Play is resumed when the button is released.
Cassettes
Recording
Leader tape (Recording cannot be made.)
Exposed tape facing
upward
Side to be recorded
facing you
Exposed tape facing
upward
Side to be played
facing you
Tab for Side A
Tab for Side B
Adhesive tape
Side A
341
2
3
1
P5-7 11/20/02, 11:27 AM5

RQT6744
6
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORM-
ANCE OF PROCEDURES OTHER THAN THOSE SPECI-
FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
SUOMI
VAROITUS!
LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄKÄYT-
TÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTIS-
TAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1 YLITTÄ-
VÄLLE NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
NORSK
ADVARSEL!
DETTE PRODUKTET ANVENDER EN LASER.
BETJENING AV KONTROLLER, JUSTERINGER ELLER
ANDRE INNGREP ENN DE SOM ER BESKREVET I
DENNE BRUKSANVISNING, KAN FØRE TIL FARLIG BE-
STRÅLING.
DEKSLER MÅIKKE ÅPNES, OG FORSØK ALDRI ÅRE-
PARERE APPARATET PÅEGENHÅND. ALT SERVICE
OG REPARASJONSARBEID MÅUTFØRES AV KVALIFI-
SERT PERSONELL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS
APPARATUS TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
CAUTION!
•DO NOT INSTALL, OR PLACE THIS UNIT, IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE TO OVERHEATING,
ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION
VENTS.
•DO NOT OBSTRUCT THE UNIT’S VENTILATION
OPENINGS WITH NEWSPAPERS, TABLECLOTHS,
CURTAINS, AND SIMILAR ITEMS.
•DO NOT PLACE SOURCES OF NAKED FLAMES,
SUCH AS LIGHTED CANDLES, ON THE UNIT.
•DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
FRIENDLY MANNER.
VAROITUS!
•ÄLÄASENNA TAI LAITA TÄTÄLAITETTA KABINET-
TITYYPPISEEN KIRJAKAAPPIIN TAI MUUHUN SULJET-
TUUN TILAAN, JOTTA TUULETUS ONNISTUISI. VAR-
MISTA, ETTÄVERHO TAI MIKÄÄN MUU MATERIAALI EI
HUONONNA TUULETUSTA, JOTTA VÄLTETTÄISIIN
YLIKUUMENEMISESTA JOHTUVA SÄHKÖISKU- TAI TU-
LIPALOVAARA.
•ÄLÄPEITÄLAITTEEN TUULETUSAUKKOJA SANOMA-
LEHDELLÄ, PÖYTÄLIINALLA, VERHOLLA TAI MUULLA
VASTAAVALLA ESINEELLÄ.
•ÄLÄASETA PALAVAA KYNTTILÄÄ TAI MUUTA AVOT-
ULEN LÄHDETTÄLAITTEEN PÄÄLLE.
•HÄVITÄPARISTOT LUONTOA VAHINGOITTAMAT-
TOMALLA TAVALLA.
VAROITUS:
TULIPALO-, SÄHKÖISKUVAARAN TAI TUOTETTA
KOHTAAVAN MUUN VAHINGON VÄHENTÄMISEKSI EI
LAITETTA SAA ALTISTAA SATEELLE, KOSTEUDELLE,
VESIPISAROILLE TAI ROISKEELLE, EIKÄNESTETTÄ
SISÄLTÄVIÄESINEITÄ, KUTEN ESIMERKIKSI
MALJAKOITA, SAA ASETTAA LAITTEEN PÄÄLLE.
THIS UNIT IS INTENDED FOR USE IN MODERATE
CLIMATES.
TÄMÄ LAITE ON TARKOITETTU KÄYTETTÄVÄKSI
LEUDOSSA ILMASTOSSA.
DETTE APPARATET ER BEREGNET TIL BRUK UNDER
MODERATE KLIMAFORHOLD.
This product may receive radio interference caused by
mobile telephones during use. If such interference is
apparent, please increase separation between the product and the
mobile telephone.
•Avoid using or placing this unit near sources of heat. Do not leave it in
an automobile exposed to direct sunlight for a long time with the doors
and windows closed as this may deform the cabinet.
•Avoid cuts, scratches, or poor connections in the AC mains lead, as
they may result in possible fire or electric shock hazard. Also, excessive
bending, pulling or splicing of the lead should be avoided.
•Do not unplug the AC mains lead by pulling on the lead. To do so may
cause premature failure or shock hazard.
•Do not operate this unit on AC mains in a bathroom, as a potential
shock hazard may result.
•When not in use, disconnect the AC mains lead from the household
AC outlet.
Precautions
ADVARSEL!
•APPARATET MÅIKKE PLASSERES I EN BOKHYLLE,
ET INNEBYGGET KABINETT ELLER ET ANNET LUK-
KET STED HVOR VENTILASJONSFORHOLDENE ER
UTILSTREKKELIGE. SØRG FOR AT GARDINER ELLER
LIGNENDE IKKE FORVERRER
VENTILASJONSFORHOLDENE, SÅRISIKO FOR ELEK-
TRISK SJOKK ELLER BRANN
FORÅRSAKET AV OVERHETING UNNGÅS.
•APPARATETS VENTILASJONSÅPNINGER MÅIKKE
DEKKES TIL MED AVISER, BORDDUKER, GARDINER
OG LIGNENDE.
•PLASSER IKKE ÅPEN ILD, SLIK SOM LEVENDE LYS,
OPPÅAPPARATET.
•BRUKTE BATTERIER MÅKASSERES UTEN FARE FOR
MILJØET.
ADVARSEL:
FOR ÅREDUSERE FAREN FOR BRANN, ELEKTRISK STØT
ELLER SKADER PÅPRODUKTET, MÅDETTE APPARATET
IKKE UTSETTES FOR REGN, FUKTIGHET, VANNDRÅPER
ELLER VANNSPRUT. DET MÅHELLER IKKE PLASSERES
GJENSTANDER FYLT MED VANN, SLIK SOM
BLOMSTERVASER, OPPÅAPPARATET.
DANGER
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
AVOID DIRECT EXPOSURE TO BEAM.
ADVARSEL
USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE
ER UDE AF FUNKTION. UNDGÅ UDSÆTTELSE FOR STRÅLING.
VARO!
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA
NÄKYMÄTÖNTÄ LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
VARNING
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH
SPÄRREN ÄR URKOPPLAD. BETRAKTA EJ STRÅLEN.
ADVARSEL
USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG SIKKERHEDSLÅS
BRYTES. UNNGÅ EKSPONERING FOR STRÅLEN.
VORSICHT
UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET
UND SICHERHEITSVERRIEGELUNG ÜBERBRÜCKT.
NICHT DEM STRAHL AUSSETZEN.
(Back of product)
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
CLASS 1
LASER PRODUCT
Inside of product
Tuotteen sisällä
Produktets innside
P5-7 11/20/02, 11:27 AM6

RQT6744
7
Maintenance
Lens
Lens care
Clean the lens regularly to prevent malfunctions.
Use a blower to remove dust and a cotton swab
if it is extremely dirty.
Recommended product:
Lens cleaner kit (SZZP1038C).
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap-and-
water solution or a weak detergent solution.
•Never use alcohol, paint thinner or benzine to clean this unit.
•Before using chemically treated cloth, read the instructions that came
with the cloth carefully.
Tape head care
Clean the heads regularly to assure good quality playback and record-
ing.
Use a cleaning tape (not included).
(For United Kingdom)
(“EB”area code model only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for
your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the re-
placement fuse has a rating of 5-ampere and that it is approved by
ASTA or BSI to BS1362.
Check for the ASTA mark mor the BSI mark oon the body of
the fuse.
If the plug contains a removable fuse cover you must ensure that it
is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replace-
ment cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
If a new plug is to be fitted please observe the wiring code as
stated below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured mark-
ings identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the ter-
minal which is marked with the letter N or coloured Black or
Blue.
The wire which is coloured Brown must be connected to the termi-
nal which is marked with the letter L or coloured Brown or Red.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains
plug (figures A and B). Confirm the AC mains plug fitted and follow
the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
Caution for AC Mains Lead
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME
THEN THE FUSE SHOULD BE REMOVED AND
THE PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED
INTO ANY 13-AMPERE SOCKET.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE LETTER
E, BY THE EARTH SYMBOL nOR COLOURED GREEN OR
GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
Figure A Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
Figure A Figure B
Fuse cover
Using headphones (not included)
Turn down the volume and connect
the headphones to the [PHONES]
jack.
Plug type: 3.5mm stereo
Note
Avoid listening for prolonged periods of
time to prevent hearing damage.
PHONES
~ ~
•If this unit is not used for a long period of time or is used only
from an AC power source, remove all the batteries to prevent
potential damage due to possible battery leakage.
•Align the poles (+ and –) properly when inserting the batteries.
•Do not mix old and new batteries or different types of batteries.
•Do not recharge ordinary dry cell batteries.
•Do not heat or disassemble the batteries. Do not allow them to contact
flame or water.
•Do not keep together with metallic objects such as necklaces.
•Do not use rechargeable type batteries.
•Do not use batteries if the covering has been peeled off.
Mishandling of batteries can damage other items, cause damage to the
unit, and may cause a fire through short-circuiting or electrolyte leakage.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any part
of your body.
Use of Batteries
P5-7 11/20/02, 11:27 AM7

Frequency range
FM 87.50–108.00 MHz (50kHz steps)
AM 522–1629 kHz (9kHz steps)
Sampling frequency 44.1 kHz
Decoding 16 bit linear
Beam source Semiconductor laser (wavelength 780 nm)
Pickup
Bølgelengde 780 nm
Laserstyrke Ingen farlig stråling sendes ut
(med sikkerhets-beskyttelse)
No. of channels 2 channel, stereo
Wow and flutter Less than possible measurement data
D/A converter 1 bit DAC
Track system 4 track, 2 channel, stereo
Monitor system Variable sound monitor
Recording system AC bias
Erasing system Multi Pole magnet
Frequency range
Normal position 50–12000 Hz
Speakers
Full range 10 cm 4 Ωx2
Centre speaker (RX-D25 only) 1.5 cm
Jacks
Output PHONES: 3.5 mm stereo (32Ω)
Power requirement
AC 230-240 V, 50 Hz
Power consumption: 11 W
Battery 9 V (Six R20/LR20, D, UM-1 batteries)
• Do not use rechargeable type batteries.
Memory back-up 6 V (Four R6/LR6, AA, UM-3 batteries)
• Do not use rechargeable type batteries.
Dimensions (WxHxD) 420 x 167 x 275 mm
Mass (RX-D25) 3.6 kg without batteries
(RX-D21) 3.4 kg without batteries
Note
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
RQT6744-B
L1102KW0
En
Specifications
Take note of the following points to extend the life of your equipment.
Always read the instructions provided with the software.
Discs
Choose discs with this mark:
Continued use of irregular shaped CDs
can damage the unit.
Do not
• use CDs with labels and stickers that are
coming off or with adhesive exuding from
under labels and stickers.
• attach scratch-proof covers or any other
kind of accessory.
• write anything on the CD.
• clean CDs with liquids.(Wipe with a soft, dry cloth.)
• use CDs printed with label printers available on the market.
• load a blank CD-R as it will cause abnormal malfunction and may
damage the CD-R.
Cassette tapes
• Tapes exceeding 100 minutes are thin and can break or get caught in
the mechanism.
• Tape slack can get caught up in the mechanism and should be taken
up before the tape is played.
• Endless tapes can get caught up in the deck’s moving parts if used
incorrectly.
Audio software
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the directory of Authorized
Service Centers (enclosed with this unit) to locate a convenient service center, or consult your dealer for instructions.
Troubleshooting guide
Common Problem
The unit doesn’t work on batteries.
“UO1” is displayed.
Is the AC mains lead connected to the unit? Disconnect when using batteries.
Have the batteries been inserted correctly? Check that the poles (+ and –) are correctly aligned.
Replace the batteries or use household AC power.
CD
“E” is displayed.
Play doesn’t start or display is incorrect.
Indicates an incorrect operation. Read the instructions.
Clean the CD.
Wait for an hour for condensation to dry, then try again.
Make sure the label is facing up.
Replace the CD if it is scratched, warped, or irregularly shaped.
Cassette
Recording not possible.
Poor sound quality.
The cassette cannot be ejected or the lid can’t be
closed when loading a cassette.
Has the cassette’s tab been removed? Cover the hole with adhesive tape.
Clean the heads.
The batteries are flat. Replace the batteries or connect to household AC power.
Press [/PLAY] then [L/cSTOP/EJECT].
Radio
A lot of noise. Is another remote control being used? Use it further away from this unit.
Is a TV on? Move the unit away from the TV or turn it off.
Remote control RX-D25 only
The remote control doesn’t work. Check the batteries are inserted correctly.
Replace the batteries if they are worn.
P8 11/20/02, 11:27 AM8